Protect your investment in a premium underwater camera housing with the Gates Pro Action Underwater Housing Case from Jason Cases. This rugged case builds laser-cut foam and a rigid overlay into a Pelican Storm iM2720 case to protect your gear. The laser-cut foam precisely conforms to the housing, keeping it snug and protected. The rigid overlay is fixed to the top surface of the compartment foam, offering additional protection from wear and tear, as well as labeling of the compartments. The case will hold the housing (with the side handle and neoprene lens cover attached) and cables and accessories in the extra slots.

The Storm iM2720 is an injection-molded case made of HPX high performance resin that is virtually unbreakable, dent-resistant and shatter-resistant. It is tough, rugged, lightweight, airtight and watertight. It is equipped with a permanently attached Vortex valve that automatically adjusts air pressure without letting in water, and that won't unscrew from the case. Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress. The case has unbreakable molded-in hasps to allow the addition of standard size padlocks. It also has hinges with integrated feet that hold fast under impact, and create a flat surface for upright stability. It has three double-layered, soft-grip, solid-core handles; a lightweight, retractable, telescoping handle and rugged in-line wheels for easy transport.

For Gates Pro Action Underwater Housing    Laser-Cut Foam Interior with Overlay    Pelican Storm iM2720 Case    Extra Slots for Cables and Accessories    Airtight & Watertight Case    Built-In Air Pressure Valve    Three Side Handles & Telescoping Handle    In-Line Wheels

Laser-cut high-grade foam holds housing and accessories securely

Built to hold Gates Pro Action Underwater Housing with side handle and neoprene lens cover attached

Rigid overlay with Gates logo for further protection

Extra slots for cables & accessories

Injection-molded case made of HPX high performance resin is virtually unbreakable, dent-resistant and shatter-resistant

Tough, rugged and lightweight

Airtight and watertight

Permanently attached Vortex valve automatically adjusts air pressure without letting in water, and won't unscrew from the case

Press & Pull latches open with the push of a button, yet stay closed securely under impact or stress

Two unbreakable molded-in hasps allow the addition of standard size padlocks, offering another measure of security

Hinges with integrated feet hold fast under impact and create a flat surface for upright stability

Molded-in stacking ribs provide no-slip stability for multiple case-stacking during storage or transport

• Three double-layered, soft-grip, solid-core carrying handles provide strong, durable comfort
• Lightweight, retractable, telescoping handle locks in place
• Rugged in-line wheels have shielded ball bearings, and are composed of a nylon core encased in a polyurethane tread. The wheels are mounted on a solid axle for improved stability and ease of transport.

• Meets ATA 300 category 1 standards for transit cases
• Meets FED-STD-101C requirements for drops and vibration (loose cargo)
• Exceeds the specifications listed in MIL-STD-648C for vibration (sweep)
• Meets MIL-STD-810F for immersion and simulated rainfall

Related Questions and Answers

Q: 1. can it fit a 2020 27" iMac ?

A: Yes, the Jason Cases Travel Case for Apple iMac 27" / iMac Pro will fit a 27" 2020 iMac inside.

Q: 2. Does this case have room for MIMIC controller?

A: Yes

Q: 3. I want to know if the Jason Protective case for fully assembled movi pro 1) comes with wheels? 2) does it fit with the handle attached to top? can't tell from picture. just specifies feet.

A: 1.It does have wheels2.It does not fit with top handle attached, you have to remove the top handle from the Movi ring to fit into case

Q: 4. Is it possible to shoot aperture priority with this? Is there a way to config the G7x iii so that you can adjust aperture with the back buttons instead of the dials? Thanks

A: [11:30 AM] Lawrence Cohen The Ikelite Underwater Action Housing for Canon PowerShot G7 X Mark III allows you to shoot in aperture priority mode. Check the Canon PowerShot G7 X Mark III user manual to change the aperture control button. All rear buttons can be accessed in the housing.

Q: 5. Can this case be customized for various collections of lenses? Or only the exact set shown in the photos?

A: Jason Cases Sony FE Lens Case BH #JASNFELBK comes with pre-cut foam and can't be customized for various collections of lenses.

Q: 6. Even though this is specifically labelled for certain focal lengths, will the holes in this case fit any of the Tokina Vista Primes? They are all 114mm diameter so I'm assuming any Vista Prime will fit.

A: The Jason Cases Tokina Vista Prime case is designed to work with the following lens models. However, Some Tokina Vista Prime models could be too long for the case. As long as the length of the lens is about 6.5 inches it would work. It will store the following items: Tokina Vista 18mm lens Tokina Vista 25mm lens Tokina Vista 35mm lens Tokina Vista 50mm lens Tokina Vista 85mm lens Tokina Vista 105mm lens

Q: 7. With this house the mark ii versions of the 24-70 and the 70-200?

A: Unfortunately, the Jason Cases Sony FE Lens Case is only for the Mark 1 versions of those lenses.

Q: 8. Will this case hold the FX30 with the Kondor Blue cage on it ?

A: The Jason Cases Sony FX3 Camera Case is laser cut to fit it very specifically stock or with the handle mounted, with placement for additional accessories needed for operation.

Q: 9. Is the Jason cases Canon RF 3-Lens Case able to host also the lens hoods?

A: Jason Cases Canon RF 3-Lens Case only holds the lenses. You would need to pre order a customized case from the manufacture if you need to attach the lenshood on reverse on each lens.

Q: 10. How many inches of cushioning is there between the bottom of the mac studio on the bottom of the case?

A: The Jason Cases Apple Mac Studio Case has 2.5" of foam padding between the bottom of the case and the bottom of the Mac Studio.