The FREEFLY MōVI XL 3-Axis Motorized Gimbal Stabilizer supports cameras and accessories weighing up to 50 pounds, so it is designed to be mounted on a remote head, jib or other support gear to create smooth cinematic moving shots. It uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll.

The FREEFLY MōVI XL is suitable for professional cinema cameras and lenses and compatible with both the Mimic and MōVI Controller systems (not included), as well as select Futaba and Spektrum transmitters. As with sled-style stabilizers, the camera should be balanced on the MōVI to ensure best performance. Once balanced, the MōVI pairs over Wi-Fi to an iOS, Android, or Windows app to finalize the configuration process.

MoVI XL 3-Axis Stabilizer with Case    Black Arm Complete Dampening System    Tranquilizer Mount    Tranquilizer Pan Barrels 50    Tranquilizer Shore Packs 30-76 lb    Mitchell Mount Female    MoVI XL Quick Release Kit    MoVI XL to Mitchell Adapter

For a full list of compatible cameras, please see the most current compatibility information on the FREEFLY website.

The MōVI XL is designed to support payloads up to 50 pounds, making it suitable for professional cinema cameras with cinema lenses.

The MōVI XL can be operated remotely either with a dedicated controller or by using the Mimic controller (neither controller is included and must be sourced separately). The MōVI XL is compatible as well with most Spektrum and Futaba radios.

MōVI XL can be configured wirelessly via Bluetooth LE, from the MōVI XL app on a mobile device.

You can hot swap the batteries on the MōVI XL, but extreme care must be taken to avoid damage to the batteries, and to the operator.

• Majestic Mode: For single-operator use. In this mode the gimbal provides stabilization without counteracting operator-directed camera movements. For example, you could set it in majestic to pan with a vehicle turning on streets or a jib with only one operator for example. This mode is especially useful when the MōVI XL is deployed on a moving vehicle.
• Stabilized Mode: Assumes no operator input, compensating for all movement it detects. Ideal scenarios for this mode include when the gimbal is mounted to a car or shots where the camera is moving, but the camera angle remains fixed.
• Slew Stabilized Mode: For dual-operator control. In this mode, an operator with a dedicated remote or RC transmitter controls pan, tilt, and roll independently of the support platform.

The Freefly Configurator is a GUI that enables you to precisely adjust your MōVI XL via an iOS or Android device over Wi-Fi pairing.

The motors driving the gimbal have been designed to operate as quietly as possible to ensure you will be able to record sound without picking up any unwanted noise.

Making hundreds of adjustments per second, the software works to counteract translation--the bobbing up and down effect while running--when tracking a moving subject moving at high speed.

Keeps a record of the camera position (where GPS is available), height, camera pan, tilt, and roll so that the shot can be recreated later or to help Visual Effects align the live action shot with other elements in a CG composite.

Using separately available mounting hardware, it is possible to mount the MōVI XL on cranes, jibs, ad remote heads.

You can upgrade the gimbal to new software features as they are released by Freefly yourself, without having to send the device in for a factory update.

The MōVI XL system uses powerful motors that enable you to create smooth shots while on camera platforms moving at high speed.

Want an organic hand-held look? The MōVI provides variable noise filters that allow you to effectively dial in a custom amount of shake to help you achieve the effect you are after.

• Custom designed, precisely calibrated sensors

• Fully tool-less balancing

• Second battery cage of holding a battery dedicated to powering accessories

• Handles can be switch from low to high modes with flip of a lever

• Quick release top handle

Related Questions and Answers

Q: 1. Does it come with the 4 screws for the Alexa Mini?

A: This is for the Movi Pro gimbal and does not include screws.

Q: 2. Screws included?

A: A long camera mounting screw and short camera mounting screw is included.

Q: 3. can i fit two reflectors, two grids, two xl spheres and two speedrings in one case??

A: The MagMod XL Case is large enough for one of; reflector, grid, xl sphere and one speedring. It is not large enough for two of each.

Q: 4. Will this fit well with the Tilta Advaned Ring Grip for DJI RS2?

A: Yes, The Tilta Advanced Ring grip will work perfectly with 30mm adapters like the Camvate C1552.

Q: 5. Will this auto-track an object, or is directional control via remote input only?

A: The FREEFLY MoVI XL & Black Arm Complete Vehicle Mount Kit does not auto track, but it does have three operational modes: Majestic Mode: For single-operator use. In this mode the gimbal provides stabilization without counteracting operator-directed camera movements. For example, you could set it in majestic to pan with a vehicle turning on streets or a jib with only one operator for example. This mode is especially useful when the MōVI XL is deployed on a moving vehicle. Stabilized Mode: Assumes no operator input, compensating for all movement it detects. Ideal scenarios for this mode include when the gimbal is mounted to a car or shots where the camera is moving, but the camera angle remains fixed. Slew Stabilized Mode: For dual-operator control. In this mode, an operator with a dedicated remote or RC transmitter controls pan, tilt, and roll independently of the support platform.

Q: 6. What speed would this be rated for? For instance - a 6lb camera rig ?

A: There is no speed rating for car mounts such as the iFootage Spider Crab Vehicle Camera Mount System. Experienced car rigging grips would not really pay attention to that anyway. I would add ratchet straps to make sure that the rig is not lost at the speed the movie production determines it needs.

Q: 7. Will these work on the ring for the Move M5?

A: I'm afraid not. These are replacement feet for the MoVi Ring Pro. They will not work with the original Movi Ring. I'm also sorry to say we do not have a specific option that will.

Q: 8. How long is the bar and what diameter tube can it attach to?

A: The bar length on the CTA Digital Vehicle Headrest Flex Mount is listed as 3.25".

Q: 9. Will this plug directly into the Movi Pro and receive power and control from it. I'm assuming you can control from the Mimic?

A: According to FREEFLY, the support for the Chrosziel motor is coming soon.

Q: 10. Is that a 1/4 thread on the bottom?

A: yes