The CineMilled Upper Tilt Arms Extension Stage 2 is a modular 2" tall stage pair of extensions that requires the separately available Stage 1 to extend the DJI Ronin 2 cage. Both stages can be connected to achieve the full 4" maximum extension. Tilt extensions allow much taller cameras to be secured in the Ronin 2 camera cage such as ARRI ALEXA, Panasonic VariCam XT, and many other ENG-type broadcast cameras.

Securing the camera from the upper dovetail is vital to achieving full Ronin 2 performance. You will be able to use higher stiffness numbers as a result, and it may also allow you to use the R2 camera baseplate and rod holder. The two stages are designed to be centered via locating pins that ensure a perfect fit. All hardware is included for installation, which is simple and takes just one minute.

2" Tall Stage to Extend Ronin 2 Tilt Arm    Requires Separate Stage 1 Extension    Allows Taller Cameras in Ronin 2 Cage    Combine with Stage 1 Extension Totals 4"

Related Questions and Answers

Q: 1. Does this work with the Ronin-MX as well?

A: Yes, this will work with the Ronin-M and Ronin-MX.

Q: 2. Hi I m not sure whether my ronin is gen1 or gen2. Can I upload my ronin pictures & pls help to identify whether my ronin is gen1 or gen2

A: The 1st Generation Ronin has a square mount, while the 2nd generation has an angled mount. You are more than welcomed to email images to us at askbh@bhphotovideo.com if you feel that would be helpful.

Q: 3. If I use these on the Ronin MX with a Canon C300 mki will I be able to use briefcase and overslung mode normally?

A: I use the C100 mkii with these extentions in the ronin mx and the dimensions of the camera won't let you turn the ronin from normal mode to overslung without turning the ronin off. It' not the best camera size for the ronin.

Q: 4. Will this work with the C100 mark 2 if you have the extension arms or is the viewfinder still an issue?

A: You cant mount it without them and balance the setup correctly. I have successfully used them with the C100. Yes the eyepiece hits the frame when you tilt back more than I dont know,30deg. But all you do is tilt the Ronin backwards and you are fine. To balance the tilt axis instead of the handle being straight up during the procedure, take it off the stand and rotate the handle backwards 90deg and then proceed to balance.

Q: 5. Hi I have a Tiffen master series arm and Djı ronin 2 Which size should I take?

A: From what I can gather, this unit will not fit a master series arm.

Q: 6. does this plate work with the came tv stabilizer? https://a href= http://www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html target= _blank www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html/a

A: No, this is made specifically for the Ronin dovetail.

Q: 7. Just wondering if there are any products similar to this? Allowing to mount a ronin 1 dovetail on top and a tripod baseplate on the bottom.

A: RigWheels make a Ronin Mounting Adapter Plate as well, B&H # RIRAMP. https://bhpho.to/2PUsnyw

Q: 8. Is this arca swiss compatible???

A: Yes, the DJI Upper Quick Release Plate for Ronin is an Arca-Swiss plate.

Q: 9. Will this work with the Ronin RS2?

A: It will not.

Q: 10. What are the hole sizes in the Cinemilled armpost adapter plate? I'm wondering if using a male to male 1/4 or 3/8 thread adapter, I could attach a Ronin-S to this plate (i.e., not attach the armpost adapter to a gimbal handle bar but just to the bottom of the Ronin-S).

A: We are not aware of a way for this product to be used with the Ronin-S. One portion connect to a 1/2" post from a Steadicam system, while the other connects to a 30mm Top Bar on the original Ronin.