This Profoto 20° Honeycomb Grid for Zoom Reflector 2 provides a beam spread of 20° when mounted on a Profoto Zoom Reflector. This grid mounts directly onto the Zoom Reflector 2.

Note: When used with an older Profoto Zoom Reflector (circa 1990's), this grid requires a barndoor with grid holder or a grid and filter holder kit.

Grids are essential accessories for any lighting system. These devices alter the shape and intensity of the light output from your flash heads. Using a grid will narrow the circle of light when it is attached to the front of your light source. The size of the circle of light will be determined by the density of the honeycomb, its thickness, and the distance of the subject. The lower the number is in degrees the smaller the circle of light.

For Zoom Reflector 2    Requires Holder for Older Zoom Reflector    20° Grid

Related Questions and Answers

Q: 1. Have read conflicting reviews on how well this works on a B1 without the added dome. Can others let me know their opinions? Have you used it on a B1 and what are your results? Thanks!!

A: Laurie, I am not sure about 'without the aded dome' part of your question. However the Profoto Zoom Reflector 2 is a quick and easy way to modify the light when used with the B1 OCF. I have found adding the Profoto Grid Kit (B&H #PRG5K MFR #900849) takes the Zoom Reflector to another level entirely.

Q: 2. Will this fit the D1 Air heads?

A: Yes.

Q: 3. Hi, what size diameter is the Profoto Zoom Reflector 2? What is the weight? Thanks. Paul

A: The interior diameter is 7 3/16 in. A Profoto grid that fits inside is about 7 1/8 in diameter ( a little less). As for the weight, it's less than a pound ( approx. .6 pounds). It's very light. Some else give you the 7.6 in dia. which is the outside dim.

Q: 4. does this work with the d1 air?

A: The grid is made specifically for the pro photo zoom reflector 2 which is also made to fit the D1 air.

Q: 5. Will this reflector fit on the new B2 Head?

A: I use this item on a B1. However, I also have several of the new Profoto OCF modifiers designed for the B2 and they all fit on my B1's. All of Profoto's modifiers are suppose to be interchangeable across their various heads, including the B2.

Q: 6. What size is the grid, diameter, if 8 inch I assume other grids which are cheaper would work?

A: You need a Zoom reflector and the grid holder. It is a proprietary size with no alternative mount.

Q: 7. Does this zoom reflector fit a Profoto B2 flash?

A: Yes, this Profoto Zoom Reflector (White) can fit on a Profoto B2 flash head.

Q: 8. WIll this reflector fit the Profoto D2 500ws and 1000ws?

A: Yes this Zoom Reflector is compatible with both the D2 500 and D2 1000 monolights.

Q: 9. Is this one grid or a set?

A: This is a single 10 degree grid.

Q: 10. Will this properly fit the Speedotron 7 grids? a href= http://www.bhphotovideo.com/c/product/50293-REG/Speedotron_14619_7_Honeycomb_Grid_Set.html target= _blank http://www.bhphotovideo.com/c/product/50293-REG/Speedotron_14619_7_Honeycomb_Grid_Set.html/a

A: They do not. I purchased after seeing the answers below and they are wrong. You'll either need to buy the Profoto grids or find a used 7" refector.