The Speed Ring Adapter for Hensel EH, Broncolor, Aurora, Westcott, Multiblitz and Photoflex Softboxes from Hedler allows you to use your existing softbox, complete with its speed ring, on Hedler D series tungsten fixtures and Profilux LED lights. The adapter mounts to the speed ring with four supplied screws using a Phillips screwdriver.

Adapter Mounts to Softbox's Speed Ring    Can use Softbox on Hedler D and Profilux

Related Questions and Answers

Q: 1. Will this speed ring work with the Impact Luxbanx Duo 9x36 Softbox (BH #IMLBSTDSS)?

A: Yes the Hensel Speed Ring EH BH #HESROF • MFR #4000300 Will work with the Impact Luxbanx Duo 9x36 Softbox (BH #IMLBSTDSS).

Q: 2. what is the actual diameter of the flange? I'm trying to see if the Profoto insert will also work in other modifiers.

A: As per the manufacturer, the diameter of the flange is 4

Q: 3. Will this work with the ELB 500 WITH Q adapter?

A: Yes, the Elinchrom Rotalux Speed Ring for Elinchrom Flash Heads will work on the ELB 500 strobe when using the Elinchrom Quadra Reflector Adapter MK-II, https://bhpho.to/47fFOB9.

Q: 4. I have some Hensel softboxes and reflectors. Are there any speedrings that I can use with Bowens flash heads, as Godox flashes?

A: Yes, Impact Speed Ring for Impact, Bowens S, Westcott & Aputure BH #IMSRIMPV2

Q: 5. can the base separate?I would like to confirm if on this unit, are the 4 screws at the bottom of the base that are shown in the photo, is it possible if those were loosen, that I could then detach the black rubber neck piece, resulting in having 2 separate pieces?I have a older Photoflex Octobox that I use with another strobe, and when I mounted my octobox to those strobes there was a plate that appears to look just like the one in this photo but it does not have that wide base part with the 4 screws, which is where the rods connect to.I have the D2 profoto now, but i just need the speedring that will slide onto barrel of my profoto and the other end will be the thin, flat, round plate that I would connect to my octobox and tighthen down with the 4 screws it has.So if I could verify that this item could be separated into 2 pieces, this might be what I have been looking for?

A: The center ring and the outer ring can be detached from one another, however if you just need the center ring for a custom set up, we also offer the Profoto Adapter Plate for Custom Made Reflectors to fit Profoto Flash Heads B&H # PRAPR. Please see the image below.

Q: 6. Is it compatible with Aputure light ?

A: Yes, most Aputure lights that are Bowens-compatible will accept the Elinchrom Rotalux Speed Ring for Bowens S-Mount Flash Heads.

Q: 7. Will this mount on the Elinchrom D-lite RX 4 head? I’m using the Rotalux 39 inch octabox I tried it, and it won’t lock in place.

A: This Elinchrom Rotalux Speed Ring for Elinchrom Flash Heads is fully compatible with the Elinchrom D-lite RX 4 head.

Q: 8. will this work with stella pro reflex light?

A: this will fit https://www.bhphotovideo.com/c/product/1666990-REG/light_motion_800_0382_a_chimera_speedring.html the elinchrom ring is to big

Q: 9. Would this fit an Octagon from Impact on my Profoto strobe head?http://www.bhphotovideo.com/c/product/889690-REG/impact_lb_od_l_luxbanx_duo_large_octagonal.html

A: Yes, the Photoflex Speed Ring for Profoto, B&H # PHSRODPF, would allow you to attach the Impact Luxbanx Duo Large Octagonal Softbox (84 ), B&H # IMLBODL, onto Profoto strobe heads.

Q: 10. Will this speed ring work for elinchrom style 400BX Light & the elinchrom rotalux octabox (135 cm/53")

A: YES this will work with Elinchrom softboxes and the Elinchrom 400bx light.