The Gator Cases Titan Series Waterproof Case is a durable hardshell case designed to hold a Sennheiser EW 135 G3, EW 145 G3, or EW 165 G3 wireless microphone system for musicians and audio engineers in clubs, concert venues, and live stage applications. Made of impact-proof, lightweight NK-7 resin, it is ATA-300 certified for flight readiness. It boasts an IP67 rating and a Mil-STD-810F certification for protection against damage from water and dust, keeping your wireless system safe.

Internal cutouts and the 1" convoluted foam mounted in the lid enable secure placement of your system components. The Powerclaw latching system delivers closure and release with minimal effort. The soft-grip comfort handle offers an easy one-handed transport of the case, which is pad-lockable (padlocks available separately).

Holds One Wireless Microphone System    For Large Sennheiser EW Series    IP67-Rated for Water & Dust Protection    ATA-300 Certification    Easy-Release Powerclaw Latching System    Pad-Lockable    Impact-Proof Lightweight NK-7 Resin    Mil-STD-810F Immersion Test Certified    Soft-Grip Comfort Handle    1" Convoluted Foam in Lid

• Holds one Sennheiser EW 135 G3, EW 145 G3, or EW 165 G3 wireless system
• IP67-rated for protection against damage from water and dust
• ATA-300 certification for flight readiness
• Powerclaw latching system is easy to open and close
• Pad-lockable (padlocks available separately)
• Impact-proof NK-7 resin is lightweight and durable
• Mil-STD-810F immersion test certified
• Soft-grip comfort handle allows ease of transport
• 1" convoluted foam in lid aids in keeping the contained components secure

Related Questions and Answers

Q: 1. Can the pre-cut foam insert be purchased seperately?

A: No, the pre-cut foam insert is not available to purchase separately. However, it may be possible to get a replacement foam insert for an existing case through Gator Cases customer support.

Q: 2. which frequency set is better? and what are the applications of each: A, A1, G?

A: In general, all of the frequency ranges offered for the Sennheiser EW 100 G4-ME2 Wireless Omni Lavalier Microphone System can be considered equal. One becomes better than the others when assessing factors such as location and other wireless systems existing and operating in the same environment. For instance, some cities have more open channels on a specific range than others. If this system is being integrated into a scenario with other wireless microphones, the existing frequency ranges of those microphones should also be taken into consideration when choosing a frequency for the Sennheiser. This system has 1,680 potential frequencies on each range and the ability to scan for the cleanest channel based on location, so it is hard to go wrong with any range.

Q: 3. Should I get a different frequency if want to get two?

A: That is not necessary. The bodypack transmitter provides up to 8 hours of operation on two AA batteries, with a fixed 30mW RF power output and a transmission range up to 330'. Up to 12 wireless mics can operate simultaneously in the same space, with the receivers linked together for fast, multi-channel frequency setup. Fast Multi-Channel Setup for Expanded System To simplify and speed up your workflow, two RJ10 data networking ports allow you to daisy-chain up to 12 receivers and quickly perform a frequency setup for the entire multi-channel system via the Easy Setup function. If you assign the frequencies manually, you can expand the setup to accommodate a maximum of 20 receivers. An RJ10 cable is included.

Q: 4. Will a Sennheiser EM500G3 fit with the antennas attached?

A: This case will not fit the Sennheiser EM500 receiver. The SKB iSeries Waterproof Sennheiser EW Wireless Microphone Case, B&H # SK3I1711SEW is the appropriate case.

Q: 5. Can this fit the rode caster pro II and a shure sm7b microphone together?

A: Yes, the Gator Titan Series Waterproof Case for RODECaster Pro and Two Mics can fit the Rode RODECaster Pro II Integrated Audio Production Studio and a Shure SM7B Vocal Microphone.

Q: 6. Would this be appropriate for the XS Wireless 2 system? The cardboard box is not cutting it.

A: According to the specs of the XS Wireless 2 receiver, the iSeries Waterproof Case for Sennheiser EW 100/300/500 Series Wireless Combo Mic should be able to hold the XS Wireless 2 receiver, however there will be a bit of empty space as the receiver is smaller than the EW 100/300/500 series.

Q: 7. Can you use this receiver with multiple wireless microphones at the same time with each independent frequency? Like using a lavalier and a wireless microphone at the same time.

A: No. This receiver is a single channel so therefore only allows reception of one transmitter at a time.

Q: 8. Will this case accept the Electro Voice RE20 mic?

A: The Gator Titan Series Waterproof Case for RODECaster Pro and Two Mics accommodates the size of the Rode Procaster Broadcast-Quality Dynamic Microphone (pictured), which measures ø: 2.09 x L: 8.43". The Electro-Voice RE20 Broadcast Announcer Microphone is slightly larger with measurements of ø: 2.13 x L: 8.54". This is only a slight difference in size, but it is hard to fully guarantee that the RE20 will also fit in this case due to its larger form factor.

Q: 9. How would I connect my macbook pro laptop with a earphone jack port to the receiver in this sennheiser wireless mic system? I doesn't come included as an accessory in the box. Is it this: Mogami Gold 3.5mm TRS to Dual 1/4" TS Accessory Cable (6')

A: You will need an interface with a XLR cable to connect this mic system to your computer. links below . any Questions please call B&H pro Audio or Video Chat Pro Audio . https://www.bhphotovideo.com/c/product/1479273-REG/focusrite_scarlett_solo_3g_scarlett_solo_usb_audio.html?sts=pi&pim=Y https://www.bhphotovideo.com/c/product/318711-REG/Mogami_GOLD_STUDIO_06_Gold_Studio_XLR_Male.html

Q: 10. will the rodecaster fit in the case with a decksaver cover ?

A: We have not tested this case with a Decksaver, but it appears that the Decksaver is going to add about 1/4" to the overall height, so it will be tight, but the pyramid foam in the top of the case is quite pliable, so although snug, it should fit.