The Audix R61 Kit is a Performance Series single-channel true diversity receiver designed to deliver enhanced range and easy configuration for musicians, vocalists, presenters, and public speakers in houses of worship, concert venues, conferences, and live stage applications. It offers 207 pre-coordinated frequencies across 64 MHz of bandwidth in the 522 to 586 MHz frequency band. Use one wireless microphone (available separately) from up to 450' away. One-touch sync and auto scan functions provide simple and efficient setup.

The high-contrast LCD shows a host of information such as battery level, frequency, and AF/RF signal strength, which can be optimized via adjustable AF and RF gain. XLR and 1/4" outputs allow compatible connectivity with the balanced or unbalanced inputs on your mixing console. The R61 Kit ships with two antennas, two BNC cables, a carrying case, an audio cable, one power supply, and a rackmount kit.

Single-Channel True Diversity Receiver    Bodypack, Lav Mic & Handheld Microphone    522 to 586 MHz Band, 64 MHz Bandwidth    207 Pre-Coordinated Frequencies    High-Contrast LCD Display    AF and RF Gain Control    Range up to 450'    One-Touch Sync and Auto Scan    Includes Antennas and Audio Cable    Includes Power Supply and Rackmount Kit

Incorporate up to 24 systems to use 24 unique channels simultaneously

Single-channel receiver supports one wireless microphone

64 MHz wide spectrum tuning

207 pre-coordinated frequencies

2560 tunable frequencies

High-contrast LCD shows RF and AF signal strength, group/channel/frequency, level/squelch, battery level, and more

One-touch sync via infrared

One-touch scan eliminates inefficient manual tuning

Ground-lift switch helps eliminate ground loops or hum

Metal strain relief for power cable

Adjustable AF and RF level

Selectable receiver lock disables the scan, sync, and power buttons

Selectable transmitter lock prevents the transmitter from being accidentally muted or powered off

Allows front- or rear-mount antenna configurations

Related Questions and Answers

Q: 1. Has anyone tried hiding this mic in clothing so you can't see it? Is it a good option for doing interviews in loud locations?

A: The Shure UL4 UniPlex Cardioid Subminiature Lavalier Microphone can be used under clothing with a rubber mount like the LMC Sound CMTBK C Mount Universal Lavalier Mount (B&H # LMCMTBK) or the LMC Sound CMTVPRBK C Mount Vampire Clip Universal Lavalier Mount (B&H # LMCMTVPRBK) which has a dual-pin back. The mic can also be mounted and isolated with soft foam pads like the Viviana Pads Soft Foam Mounts for Lavalier Microphones - 12-Pack, Black (B&H # VIVPB12P), which can also be used to secure the rubber mount to clothing or skin. To prevent additional noise from cable friction, you can use the Bubblebee Industries Rubber Lavalier Cable Savers - 4-Pack (B&H # BUBBILCS4BL). The mic's cardioid pickup pattern will help to reduce background noise.

Q: 2. Are you able to change the frequency on this wireless microphone system?

A: No the frequency is fixed at Band 7: 500.1 - 530.5MHz.

Q: 3. What receiver does this work with? I can't find a similar one made by Senal.

A: The Senal AWS-2000P Plug-On Transmitter is intended for use with the Senal AWS-2000 Wireless Receiver. There are two options for frequency bands. This particular transmitter operates on the B frequency band which covers 554 to 586 MHz and the transmitter for the A band which covers 522 to 554 MHz. The transmitter and receiver must both operate on the same frequency band.

Q: 4. Would this work with DPA 4060 lav? No mention of phantom power.

A: The DPA Microphones 4060 CORE Normal-Sensitivity Omni Lavalier Microphone with Locking 3.5mm Sennheiser Adapter (B&H # DP4060OCCB34) is compatible with the Deity Microphones Theos DBTX Digital Wireless Bodypack Transmitter with Omni Lavalier Microphone (550 to 663 MHz), but it will only be able to provide the minimum necessary plug-in power (5V), so it is not the most ideal combination.

Q: 5. Would this work with a Shure SLX1 body pack?

A: Yes, the Shure UL4 UniPlex Cardioid Subminiature Lavalier Microphone is compatible with SLX1 bodypack transmitters.

Q: 6. What receiver works best with this base?

A: The Shure MXW1 Hybrid Bodypack Transmitter with Microphone (Z10: 1920 to 1930 MHz) is designed to integrate into a larger "networked" audio system and uses transceivers from Shure's MXW line such as the Shure MXWAPT2 2-Channel Access Point Transceiver (BH #SHMXWAPT2Z10) to communicate with the larger system. The MXWAPT2 feeds a unit such as the Shure MXWANI4 4-Channel Audio Network Interface (BH #SHMXWANI4) for further system integration.

Q: 7. Is this compatible with the Shure SLXD1 body pack?

A: No. This version of the Shure UL4 UniPlex Cardioid Subminiature Lavalier Microphone has a standard 3-pin XLR connector for connection to the mic input on a mixer, amplifier, recorder, camera, etc. The Shure SLXD1 Bodypack Transmitter requires a TA4F 4-pin mini-XLR female connector for connection to a wireless bodypack transmitter. You will want to use the Shure UL4 UniPlex Cardioid Subminiature Lavalier Microphone for Bodypack Transmitter - Black, TA4F (B&H # SHUL4BCMTQGA) for connection to the Shure SLXD1 Transmitter.

Q: 8. What is the difference between MFR# DTU0253D54 and MFR# DTU0253D57 ?

A: DTU0253D57 is the international version of the Deity Microphones Theos DBTX Digital Wireless Bodypack Transmitter. DTU0253D54 is the USA/North American version.

Q: 9. Can the Theos DBTX transmitter RECORD internally AND transmit at the same time simultaneously when bought from BH Photo?

A: The USA/North America version of the Deity Microphones Theos DBTX Digital Wireless Bodypack Transmitter is not able to record and transmit at the same time.

Q: 10. Does it work in the ATR 3350 Audio technica?

A: I'm afraid not. That clip is designed to hold the mic itself the ADX10 is 10 mm in diameter. The ATR 3350 is 8 mm in diameter. Not a good fit. Try a B&H link toa href= http://www.bhphotovideo.com/c/product/885752-REG/auray_tc_olm10_tie_clips_for_olm_10.html/pageID/accessory target= _blank http://www.bhphotovideo.com/c/product/885752-REG/auray_tc_olm10_tie_clips_for_olm_10.html/pageID/accessory/aThis clip will hold the cable as opposed to the entire mic. Should fit fine.