The IO-H1 Quick-Change Coupler Mounting Head for Triad Microphone Stands from Triad-Orbit is the mounting head component of Triad's IO-R quick-change coupler system for attaching and removing microphones and other mountable equipment from their stands. It has a 5/8" mounting thread, and includes a 3/8" adapter for additional compatibility.

Essential IO-H Adapters in One Package    IO-H1, IO-H2 IO Quick-Change Adapters    IO-H3, IO-H4 IO Quick-Change Adapters    IO-H6 Quick-Change Adapter    LTADA Lighting Stud Adapter    GPADA GoPro Adapter    ACC-PCH Storage Pouch

Related Questions and Answers

Q: 1. What are the dimensions of the brass hex itself?

A: The brass hex section of the Triad-Orbit IO-H4 1/4"-20 Mounting Head is 1.5 inches long.

Q: 2. Can the ballast bag be emptied for travel, or would you recommend against it?

A: According to Triad-Orbit, you could theoretically unzip the bags and empty them, but the zipper is slightly hidden. The steel shot is in a secondary, thinner zippered pouch inside the main bag. The only downside would be filing it wherever you're traveling to. For example, using dry sand would have less than half the weight of the ballast material that the bag currently has inside.

Q: 3. What is the load capacity of the Orbit boom?

A: Dear Chris,Thank you for your inquiry. Our Orbit booms are rated to hold up to 4lbs (2kgs) on each arm, with the boom arm fully extended and parallel with the ground, before it may start to lower. However, depending on how far you extend the extension tube and the angle that you position the arms, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 4. Will this support a 10 pound monitor?

A: Yes. It is rated for a load of up to 30 lbs.

Q: 5. Will this safely support an AEA R44C mic (nearly 8lbs.) at full extension?

A: The Triad-Orbit Starbird SB-1 Studio Boom Stand has a recommended maximum weight capacity of 10 kg/22 lbs and should accommodate an 8 pound microphone apparatus nicely with its VariBal Counter Ballast System.

Q: 6. Would this work with something that has a Baby (5/8") stud receiver such as the Manfrotto 099B?

A: This stud is only for the Triad Orbit system.

Q: 7. How long is the snake?

A: No cable is provided with this item; it is just the reel. The reel's capacity is dependent on the outer diameter of the cable you use. Cable Capacity:0.41 OD: 750' (228.6 m)0.45 OD: 600' (182.9 m)0.49 OD: 500' (152.4 m)0.58 OD: 350' (106.7 m)0.67 OD: 250' (76.2 m)

Q: 8. How many of the quick change couplers does this device come with?

A: There are three Triad-Orbit IO-R38 Quick-Change Couplers (B&H # TRIOR38) included with the Triad-Orbit IO-Vector Utility Mounting Bar. Additional IO-R38 Quick-Change Couplers can be purchased separately.

Q: 9. Is th 5/8 correct fir SM7b, Procaster and Beta 58a?

A: Yes. Standard microphone threading is 5/8.

Q: 10. do these come with 1/4x20 screws?

A: Yes they are:Confirm the hole size on back of speaker can use either of the following screws (included): 8-32 x 5/8 screw (F), M5 x 20 mm phillips screw (E), 1/4-20 x 7/8 phillips screw (G) or M4 x 8 mm flat head phillips screw (H).Here's what hardware is included:https://a href= http://www.peerless-av.com/product_files/INSTR%20SHEET-087-9016-1-1.1.PDF target= _blank www.peerless-av.com/product_files/INSTR%20SHEET-087-9016-1-1.1.PDF/a