Made with steel hardware, this Flight Zone Case from Odyssey Innovative Designs is designed specifically for the Pioneer DDJ-1000 Rekordbox DJ controller. It works not only as a durable case for transport but also as a control surface, thanks to a reverse lid design that allows for a low profile when open. On the inside, beveled foam cutouts on each corner slightly raise the control board to allow for efficient DJing and mixing. A bottom cable port and open design give you access to all the necessary controls and headphone/microphone jacks.

The case is reinforced with chrome-plated steel ball corners for a tough construction, reaching an approximate weight of 25 lb. Recessed latches make for a simple rectangular design, while a spring-loaded handle is available for easy hand carrying. Finally, rubber feet at the bottom give the case stability when placed on a hard floor or flat working surface.

Allows Easy Access to Controls and Jacks    Reverse Lid Design for Low Profile    Beveled Foam Interior    Recessed Latches and Handle    Reinforced Steel Ball Corners    Bottom Rubber Feet    Weight: 25 lb

• Flight Zone-series case with steel hardware, designed specifically for the Pioneer DDJ-1000 Rekordbox
• Reverse lid design results in a low, flat profile when the case is open
• Beveled foam cutouts raise the DJ controller, making for an efficient work surface
• Access to front controls and jacks with bottom port available for organized cabling
• Recessed latches and spring-loaded handle for easy transport
• Reinforced chrome-plated steel ball corners make for a durable build
• Bottom rubber feet keep the case from skidding on the work surface

Related Questions and Answers

Q: 1. The DDJ 200 now includes a freebee. Question: How is it to be connected to the DDJ 200, being that the DDJ's ports are limited, if not non-existent? https://www.bhphotovideo.com/c/product/1458253-REG/colorkey_cku01_1050_twin_airship_effect_lighting.html

A: It would be used a as a stand alone piece of gear and not connected to the DDJ.

Q: 2. Is the use of Serato Pro free of charge or is there a need to pay a subscription? DDJ REV5

A: The Pioneer DJ DDJ-REV5 Scratch-Style 2-Channel Performance DJ Controller for Serato DJ Pro and rekordbox unlocks Serato DJ Pro for free—you don't need a license key or subscription.

Q: 3. Will this accept the xone 23 mixer???

A: Per Odyssey: "Fits Two Turntables and One 10" Format Mixer up to 10.75" Wide x 15.25" Deep Front To Back" The xone 23 is only 9.4" wide x 11.8" deep, so it should easily fit into this case.

Q: 4. Can you please verify dual voltage transformer 230c 50hz?

A: The external power supply included with the Pioneer DJ XDJ-RR All-In-One DJ System for rekordbox is designed specifically to operate at 120 VAC.

Q: 5. What are the dimensions (interior) of this case?

A: The interior dimensions are 12.75'' W x 12.75'' D x 12.75'' H.

Q: 6. Does rekordbox work with exFat? My MacBook Pro will not allow me to format my ssd Samsung T7 to the Fat32 format. The Fat32 option is available only for windows computers (NOT SURE). This question applies to all pioneer dj equipment which use rekordbox together with an external hard-drive. Rekordbox does not see any music files stored on my SSD; however, it does show (recognize) the existence of the T7.

A: No, rekordbox is not compatible with exFAT at this time. According to Pioneer DJ, it is possible to format your drive to FAT32 natively within Mac or from the command line or using third party tools in Windows.

Q: 7. Why does my Sony MDR 7506's headphone jack not fit into the XDJ RR's headphone input?  Both have 1/8" / 3.5 mm. Note: The Sony's 1/4 inch does fit.  The 1/8 inch does not.  The Sony's 1/8 inch jack is not insertable! The Sony is at least 10 years old; however, this should not matter.

A: It should fit; any 1/8 mini (3.5mm) jack (female) on the dj mixer would work with the 1/8" mini on the headphones. The newer Sony MDR 7506 headphones come with a removable adaptor (it is a 1/8" to 1/4" adaptor). This adaptor is also available at B&H, part #: PEAMPS3S or (better) RESONY18ADPT

Q: 8. Is there a deck saver for the FLX4?

A: Not at this time.

Q: 9. Is it new?

A: This product is brand new: All products purchased at B&H are brand new in the original factory box including packaging, all factory included accessories and factory warranty, unless otherwise stated to be USED, Refurbished or Demo.

Q: 10. Is Virtual DJ 8 compatible?

A: Thank you for your question. This controller can be used with virtual dj 8.