Designed with the principals of "smaller, lighter, brighter, and sharper" in mind, the angled-viewing Opticron MM3 GA/45 60mm Travelscope is built with fully multi-coated optics and measures under 10" in length. The coatings ensure accurate color rendition with improved clarity and contrast, while the larger 60mm objective lens boosts its light-gathering performance in challenging conditions such as at dawn and dusk or when trying to see into wooded areas under dense canopies. The short form factor lets you hand hold it at lower powers for convenient glassing-on-the-go without a support system.

This iteration of the MM3 GA/45 is offered here without an eyepiece for those users who already own Opticron eyepieces and are looking to upgrade their scope. It is compatible with Opticron's full range of HDF and SDL eyepieces to give you a wide variety of viewing angles and magnification to choose from. The 2-speed focusing system features an 8:1 reducer mechanism to allow for fast coarse and precision fine focusing, while the 45° angled viewing configuration places your head in a comfortable viewing position when standing, sitting, or lying prone. For optimum eyepiece orientation, the tripod collar rotates up to 90° in both directions. A 1/4"-20 mount makes it compatible with many tripods, quick release plates, and other popular support systems like window mounts.

45° Angled Viewing    16-48x Zoom Eyepiece    60mm Objective Lens    Fully Multi-Coated Optics    O-Ring Sealed, Water and Dustproof    Durable Polycarbonate Chassis    Rotating Tripod Collar with 1/4" Mount    8:1 Fine and Coarse Dual Focus    Compact Design: Less than 10" Long

• Eyepiece required for proper use; compatible with all Opticron HDF and SDL eyepieces
• 60mm objective boosts light-gathering ability for enhanced low-light use without adding excessive bulk or weight
• Anti-reflection fully multi-coated optics maximize light transmission to improve color rendition, contrast, and clarity

• Eyepiece set 45° to scope body to make it more comfortable to view when sitting, standing, or lying prone
• Slip-resistant focusing knob is easy to manipulate in cold and wet weather or while wearing gloves
• 8:1 dual-speed focusing mechanism allows for fast coarse and precision fine focusing
• Rotating tripod collar allows for precise eyepiece placement to optimize comfort and access to eyepiece
• 1/4"-20 mount makes the scope compatible with a wide variety of photo/video/field tripods and quick release plates

• Compact design, under 10", makes it easy to pack and carry during extended walks, hikes, or backpack camping trips
• Lightweight and durable polycarbonate chassis
• Chassis material is temperature resistant to limit the expansion and contraction common with metal, which can cause the optical components to move out of alignment over time
• O-ring sealed to be waterproof and dustproof for use in inclement weather
• Slip-resistant rubber armoring protects against bumps and impacts

Related Questions and Answers

Q: 1. Can the mounted scope rotate when attached to the tripod?

A: Yes, the scope can be rotated by loosening the pan/tilt tension knob at the top of the tripod. Then use the pan/tilt handle to locate the object and tighten the knob when it is found.

Q: 2. How do I find out about the Warranty on this scope?

A: The Nikon ProStaff 5 20-60x82 spotting scope has a LIFETIME REPAIR/REPLACEMENT – Excludes lost or stolen products and intentionally caused damage. When shopping our site you can always see what is included with an item by viewing the overview tab and finding the “In the Box” listing located on the right hand side of our web page. The length of the warranty is listed there.

Q: 3. Does this Nikon have a tripoid mount included with purchase? Will it fit on the E IMAGE EK60AAM tripod without needing an additional purchase of an adapter ?

A: The Nikon ProStaff 5 20-60x82 Spotting Scope (Straight Viewing) BH #NIPS582SZFS • MFR #6974 has a 1/4" screw hole on the base for attaching to any standard tripod. It will mount to the E-Image EK60AAM Fluid Drag Video Head and Tripod BH #EIEK60AAM • MFR #EK60AAM. You may want an additional quick release plate to mount on the scope and leave on.

Q: 4. Will this accept a Celestron T-ring for my Cannon Rebel?

A: You still need the Celestron SLR (35mm OR Digital) Camera Adapter for All Refractor and Reflector Telescopes which Accept 1.25" Eyepieces - Requires Camera-Specific T-Mount Adapter BH #CETA1.25 • MFR #93625 https://www.bhphotovideo.com/c/product/202135-REG/Celestron_93625_SLR_35mm_OR_Digital.html To attach to the scope. The T-ring will now screw with this adapter

Q: 5. Is there an adapter for this scope that will attach to the t-ring on my DSLR?

A: If you already have a T-ring for you camera I would suggest the Novagrade T-Mount Digiscoping Adapter BH #NOUA00T101 • MFR #UA-00T1-01

Q: 6. Do you have to buy eyepiece separately or comes with one? Also, what is needed to attach Nikon dslr?

A: This model comes with the eyepiece included. To attach your Nikon DSLR you can do the Novagrade Digiscoping Adapter for Nikon DSLR Cameras. Website link: https://bhpho.to/2iB7tDx

Q: 7. A common criticism of this scope is that the mounting foot is too far forward. It appears that if the foot/support ring were turned around, the overall balance would be better. Can this be done by the user?

A: Unfortunately, the foot/support ring cannot be turned around.

Q: 8. We lost the lens cap. Does this scope use a push-on or snap-on cap? And it should be 60mm, correct?

A: The Nikon ProStaff 5 16-48x60 Spotting Scope (Angled Viewing) came with a snap-on objective lens cap. Nikon does not specify what size it was. The objective optic is 60mm. My guess would be a 62mm snap-on cap.

Q: 9. the Tripod Mounting Thread on this scope is too small for the screws on either one of my tripods (Gitzo and RRS). What's the best solution? I'm not going to buy another tripod.

A: This scope ha a universal screw hole of 1/4"-20 which most tripod heads have. Tripod legs or columns have a 3/8"-16 stud to mount a tripod head. If you need a 3/8" to 1/4" adapter, Desmond DTR-1 3/8"-16 to 1/4"-20 Tripod Thread Reducer BH #DEDTR1 • MFR #DTR-1 Desmond DTR-1 3/8"-16 to 1/4"-20 Tripod Thread Reducer BH #DEDTR1 • MFR #DTR-1

Q: 10. How do you relate the magnification (in this case 16-48, as I understand it) to the specs of the Accessories Eyepieces? These are listed in mm, not magnification. Thanks

A: To calculate the magnification, simply divide the focal length of the scope (382mm) by the focal length of the eyepiece used. For example, if you used a 10mm eyepiece, you would have a magnification of 38x.