The pair of 8.0" Bluetooth Ceiling/Wall Speakers from Pyle Pro features 400W of output power and is equipped with a frequency response of 50 Hz to 20 kHz. With version 3.0 Bluetooth, the speakers include a wireless audio-control receiver that works with several of today's devices such as smartphones, tablets, laptop, computers, etc., for streaming music at up to 30' in range.

The dual 8.0" speakers—one active and one passive—mount flush to walls or ceilings and include screw-terminal, block speaker connectors for easy installation. The speakers are perfect for custom installations and applications. A power supply, 2 x white round speaker grille covers, and 16' speaker connection cable are also included.

Suitable for Custom Installations    2 x 8.0" Ceiling/Wall Speakers    In-Wall / In-Ceiling System    Bluetooth for Wireless Streaming    Screw-Terminal Block, Speaker Connectors    Built-In Digital Sound Amplifier    Mounts Flush to Walls or Ceilings    ABS Construction    White Round Grille Covers

Includes 2 speakers (one active + one passive)

Bluetooth version 3.0 works with all of today's devices (smartphone, tablet, laptop, computer, etc.)

Wireless range up to 30'

Built-in digital sound amplifier

Ability to daisy-chain active speaker to passive speaker as stereo system

Related Questions and Answers

Q: 1. How is the power supply connected to the speaker? How long is the power supply lead

A: Hi, Thank you for reaching out. Power supply connected to the Bluetooth controller and Each light requires a 120v supply. The sound system is powered through a control module that also requires a separate 120v power supply.

Q: 2. Was wondering if these would be good for PA use in a small conference room. Mainly just one person talking with a lapel mic making a presentation to about 50-70 people ?

A: Of course they would be more than capable. These speakers have been phenomenal for the $. They sound excellent as whole house SONOs speakers and appear far more expensive than they were. Highly recommend.

Q: 3. Could two of these speakers be connected in parallel to a 4 ohm mono amp?

A: When conecting two of the Pyle Pro PDICRD 5.25" In-Wall/In-Ceiling 150W 2-Way Stereo Speakers (Pair, White) to a 4Ω amp, they should be wired in series to maintain an appropriate load.

Q: 4. Could I connect audio from my laptop to this karaoke system? Normally the karaoke videos are available from you tube and played on the laptop or desktop computer.

A: You can play music from a laptop or a phone into this Pyle Pro system. There is a 3.5mm line input on the top of it where you can use that size cable to connect the two. This is an example of a compatible cable. PEMMSA106B

Q: 5. Can I mount this on a 23 degree ceiling, meaning the mount and rod would be at an angle rather than straight down?

A: The Pyle Pro Swivel/Adjustable Wall/Ceiling Speaker Mounts (Pair), BH # PYPSTNDC31, may be mounted on an angled ceiling.

Q: 6. what is the recommended amplifier power for PIC8E speaker ?

A: The PIC8E speaker is rated at 300 watts peak and 150 watts RMS power at 8 ohms. You will want an amplifier that can supply around 300 watts RMS at 8 ohms per channel.

Q: 7. Will this work with 240v power?

A: The Pyle PDWR42BBT will only work with 120 VAC, 60 Hz directly.

Q: 8. Are these speakers switchable between 4 and 8 ohms?

A: Two of the speakers with a stereo amplifier will be 8 ohms. If you add another pair of speakers, they would run at 4 ohms and require twice the power.

Q: 9. Do these speakers get hot when in use? Can I place insulation directly on top of them? Please advise of any concerns in this regard. Thank you!

A: These speakers have a very tone for their size and price. I have a bunch of the installed in our classroom for a couple of years now, and have never experienced heating or performance degradation.

Q: 10. Battery life on the PWMA325BT is 4-8 hours per full charge dependent on usage.

A: Technical specs for the Pyle Pro PWMA325BT offered by the Manufacturer is Power Output: 500 Watt MAX.