The Sennhesier MZQ 608 is a microphone clip. It's designed to work with Sennheiser e 608 dynamic instrument microphones. It affixes these microphones to microphone stands, or to the instruments being miked.

Clip for E608 Microphone    Works with Instruments & Stands

Related Questions and Answers

Q: 1. Would this also work with the Sennheiser ME2 mic? a href= http://www.bhphotovideo.com/c/product/217474-REG/Sennheiser_ME2_ME2_Lavalier_Mic_for.html target= _blank http://www.bhphotovideo.com/c/product/217474-REG/Sennheiser_ME2_ME2_Lavalier_Mic_for.html/a

A: It is not recommended for the ME-2 lavalier mice. Try this one - it is a better fit: WindTech TC-12 Dual Lavalier / Lapel Microphone Soft-Mount Tie Clips for 1 - 2mm Microphone Cable (2-Pack, Black) B&H # WITC12

Q: 2. Is there a way to assign left channel to one receiver and right channel to another, either through the transmitter or the receiver configuration settings?

A: Unfortunately not , channels are not assignable.

Q: 3. Why two microphones on the same clip? Is this redundancy in case of failure? Stereo? Something else? Newbie looking to learn.

A: The Sennheiser MZQ 22 Double Tie Clip can be used for mounting either one or two lavalier microphones. The included mic holders that come with the clip are removable. There are a variety of reasons for using two microphones which could be for backup in case one mic fails or for stereo audio, or two mics can send separate audio feeds to two different destinations like two separate mixers, cameras, recorders, etc., or a combination of two devices which could be required for different applications. There is no set rule for how two lavalier mics can be used, but a double tie clip like the MZQ 22 is a very handy tool that will give you the option if the need for two microphones should arise.

Q: 4. Are these zero-latency? There is nothing more distracting than hearing yourself with a tiny delay.

A: These types of UHF frequency based systems will have the lowest latency possible when transmitting audio.

Q: 5. Is this manufactured out of metal? Or is the spring at least made out of metal. I used plastic ones before and they all 3 broke with very minimal use.

A: Yes it is made out of metal.

Q: 6. can you add more receivers than two?

A: Yes you can. When adding additional receivers, make sure they are all on the same band and then just tune all receivers to the same frequency and it will work perfectly.

Q: 7. Can the transmitter be battery powered? Perhaps via an Audioroot BDS?

A: While I haven't experimented with it, technically you should be able to. It's a 12vdc input. So as long as you have the right cable and an adequate battery, I don't see why not.

Q: 8. Will these potentially interfere with lavaliers that have already been paired on a film set? I'd like to use these as IFBs.

A: Yes, the Sennheiser ew IEM G4-Twin Wireless Monitor System Kit (A1: 470 to 516 MHz) can be used on a film set where wireless microphones are already being used. As long as the 470 to 516 MHz frequency band will work in your area and does not already have a large number of wireless mics operating on the same band, there should not be any problems. The IEM G4 system offers 1,680 receiving frequencies,

Q: 9. Hello! This package have two receivers only; Can I use more receivers for same transmitter over same frequency?

A: Yes, you can add more recievers, which would all receive the same mix. The appropriate reciever is the Sennheiser EK IEM G4 Stereo Bodypack Receiver with IE 4 Earphones (A: 516 to 558 MHz), BH #SEEKIEMG4A.

Q: 10. in terms of heat dissipation, is it safe to operate this inside a K-Tek Stingray audio bag for IFB?

A: Yes it is safe to operate the Sennheiser SR IEM G4 Stereo Transmitter inside of an audio bag for IFB.