The beige DPA 4060 CORE with TA4F Adapter is a miniature, moisture-resistant lavalier microphone designed for use with wireless systems for broadcast, performance, and theatrical applications. The electret-condenser capsule delivers crisp, clear, and intelligible speech, while the rugged yet unobtrusive design is well suited to the demands of professional live stage work and presentations.

This version of the 4060 uses DPA's CORE technology to deliver a 6 dB increase in dynamic range and a 6 dB reduction in noise over the 4060 Legacy model. Included are two interchangeable capsule protection grids that alter the sonic character of the mic. The High-Boost Grid creates a peak at 12 kHz, helpful for chest placement, while the Soft-Boost Grid offers a subtle boost between 8 to 20 kHz, lightly enhancing signal presence to ensure clarity.

With an SPL rating of 134 dB, the microphone is more than capable of handling most standard speakers, vocalists, and presenters. The mic can also be used very effectively to capture instruments—making it a flexible tool for houses-of-worship and live event productions. The 4060 CORE is powered by 5 to 10V plug-in power from a wireless transmitter and features a modular design using a Microdot output connector. This version includes a TA4F adapter compatible with Shure wireless microphone transmitters.

For Stage, Film, TV, and Presentation    Omnidirectional for Consistent Levels    For Shure Transmitters with TA4M    Handles Speech/Vocals up to 134 dB SPL    IP58-Certified Dust & Moisture Resistant    CORE Increases Dynamics & Reduces Noise    Requires 5 to 10V or Phantom Power    Includes Soft- and High-Boost Grids

• Shure: Works with Shure transmitters equipped with a TA4M connector, including the AD1, ADX1, AXT100TA4M, BLX1, GLXD1, MXW1, PGXD1, QLXD1, SLX1, SLXD1, ULX1, and ULXD1. Also supports Line 6 and TOA transmitters.
• The modular design allows you to adapt the 4060's Microdot connector to a wide variety of transmitters simply by purchasing the compatible adapter—saving you the expense of buying another microphone.

The DAD6001 Microdot to 3-pin XLR Adapter (available separately) allows you to power the 4060 from 12 or 48V phantom power for wired applications.

Related Questions and Answers

Q: 1. Will this work with the Rode Wireless Pro? Thanks!

A: You can use BH #DEDA35 with the Deity W.Lav Pro to connect it to the Rode Wireless Pro. The transmitter in the Rode Wireless Pro will provide up to 3.3V of plug-in power.

Q: 2. hi! is this fit product with DPA 4061 model?

A: Yes. This will fit both the 4060 and 4061

Q: 3. Do these concealers have a back that snaps on?

A: thank you for your question. this unit is just the top portion of the concealer without a backing.

Q: 4. Why does Deity's own website state Max SPL is 110dB yet the BH site states SPL is 130dB? Is this a mistake?

A: According to Deity, some microdot connectors allow for higher SPL ratings for the Deity Microphones W.Lav Pro Omni Lavalier Microphone (Black).

Q: 5. Would this be compatible with the Sennheiser ME 2 Clip-On lavalier mic, or with any of the lavs that come with the EW G3 systems?

A: This clip is specifically designed to work with the DPA AC4060 series mics only.

Q: 6. Hello, which variety of this lav mic is compatible with the Sony uwp-d21 system? Or is it at all?

A: Here is a link to our selection of all of the compatible lavalier mics for the UWP-D21 system. https://www.bhphotovideo.com/c/accessories/Lavalier-Microphones-for-the-Sony-UWP-D21/1484178-REG-47940?from=detail

Q: 7. This article includes the Microdot to Locking 3.5mm Sennheiser/trs Adapter? Thanks Renzo.

A: No, the Deity Microphones W.Lav Pro Omni Lavalier Microphone does not come with the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter for Sennheiser transmitters; however, the adapter is included with the Deity Microphones W.Lav DA35 Bundle Omnidirectional Lavalier Microphone with Microdot to Locking 3.5mm Adapter (B&H # DEWLAVD35).

Q: 8. Can I use this with microdot adapter that supplies 5-8v? Is that too high for this mic, given stated 2.5-3.3VDC requirement?

A: Yes, the Deity Microphones W.Lav Pro Omni Lavalier Microphone can be used with a Microdot adapter, however, the voltage is supplied by the device that the mic is connected to, not by the adapter itself, unless the adapter has a power supply. For example, the W.Lav Pro can be used with the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter (B&H # DEDA35) for connection to a wireless transmitter like the Sennheiser SK 100 G4 Wireless Bodypack Transmitter, which will supply 3V DC to the mic through the input. Please feel free to contact us by phone or through live chat if you would like assistance to select the appropriate adapter for your application.

Q: 9. Would this work on a Zoom F2?

A: Yes, the Deity W.Lav Pro Lavalier Microphone can be connected to a Zoom F2 Field Recorder using a Microdot to locking 3.5mm TRS adapter wired for compatibility with Sennheiser wireless transmitters (not Sony, as the internal wiring is different) such as the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter - Black (B&H # DEDA3S) or the DPA Microphones DAD6034 Microdot to Locking 3.5mm Sennheiser Adapter (B&H # DPDAD6034).

Q: 10. is there a mini mount that fits the Tascam DR-10L MIC?

A: You can use the LMC Sound CMTBK C Mount Universal Lavalier Mount (B&H # LMCMTBK) or the LMC Sound CMTVPRBK C Mount Vampire Clip Universal Lavalier Mount (B&H # LMCMTVPRBK). The LMC Sound CMTME2-BK C Mount for Sennheiser ME 2 Lavalier Microphones (B&H # LMCMTME2B) or the Bubblebee Industries Lav Concealer Mic Mount for Sennheiser ME 2-II (B&H # BUBBILCME22B should also work with the Tascam TM-10L lavalier microphone that comes included with the DR-10L Micro Portable Audio Recorder.