The TASCAM MZ-372 is an industrial-grade multi-channel, multi-zone mixer well suited for small format install applications such as hotels, restaurants, meeting rooms, schools, houses of worship, and more. Source content can include music, spoken word (microphone), turntables, and more and are easily controlled via familiar sliders and assignment controls on the front panel.

The MZ-372 allows up to 19 audio sources to be mixed, muted, and routed to two redundant outputs. The rear panel offers six input channels, each with two sets of RCAs for a total of 12 RCA stereo pairs for connecting a variety of equipment. Channels 2 and 3 also offer a switchable phono preamp for connecting turntables. Additionally, each of the six channel inputs offers a dedicated XLR input that is switchable between mic and line. The two outputs offer a pair of balanced XLR and a pair of unbalanced RCA connectors, while the monitor output and sub output each offer a stereo pair of RCAs.

The front panel features six volume sliders for each input channel. Each channel also offers A/B/C source select and is equipped with a dedicated gain trim and a 3-band EQ. The two main outputs feature independent volume knobs. A single combo XLR-1/4" microphone input features a volume control, two band EQ, and a "Talkover" function for music ducking when using a microphone. The TASCAM MZ-372 ships with a power supply.

Six Input Channels    Each Input Offers Mic/Line XLR Connector    Each Input Offers 2 x Pairs of RCA    Two Outputs: Each with XLR and RCA    Front Mic Input with 2-Band EQ and Duck    Dedicated 3-Band EQ on Each Channel    Dedicated Headphone Output    Dedicated Monitor and Sub Outputs    Includes Power Supply

• Maximum flexibility for audio routing, input selection, and multiple redundant output flow
• Well suited for integrator, musical instrument, and residential applications
• Multiple inputs include 12 sets of stereo RCA-type, 6 selectable mic/line XLR, and a dedicated front-panel XLR mic input; 19 total input “sets”
• Channel audio sources can easily be selected, muted, and contoured via simple volume sliders, toggle switches/buttons, and knobs
• Two redundant output channels, each with stereo XLR balanced and unbalanced RCA-type connectors and separate volume controls
• Separate stereo booth, recording, and headphone outputs, each with independent control
• One additional mic-compatible XLR input on the front panel with “Talkover” function automatically lowering source audio
• Independent three-band EQ per each of the 5 channels and a two-band EQ on the additional front panel microphone input
• Compact 3 RU rackmount design
  

   

Related Questions and Answers

Q: 1. netfix youtube pandora?

A: No no no: https://tascam.com/us/product/bd-mp4k/spec

Q: 2. Does this run on 100-240V Ac 50/60HZ? P9 says "do not connect a power supply other than 100V AC (50/60HZ)," P 53 says "power AC 100-240V (50/60 Hz)" and drawings (P26) and photos say 100-240V (50/60 Hz).

A: The BD-MP4K is rated for 100-240V 50/60 Hz. The AC power cable that is included has a standard plug for use in North America. The information in the manual on page 9 may be an error or it may be incomplete and warning not to use a power supply that is lower than 100V. But the information everywhere else in the manual and printed on the back of the unit is very clear.

Q: 3. Are there 2 SD slots? One for recording the mix and one for loading samples?

A: No. The TASCAM Mixcast 4 Podcast Mixer, Recorder, and USB Audio Interface has one SD slot that is used for recording and playback.

Q: 4. connect speaker wire to mx225?

A: The MX225 is a mixer only with no amplification. You are not able to connect speaker wire to this unit. Amplifiers will need to be connected to the Zone outputs which is where the speakers will connect to.

Q: 5. Does it decode HDCD, SACDs?

A: No, the TASCAM BD-MP4K Professional-Grade 4K UHD Blu-ray Player (B&H # TABDMP4K) does not decode HDCD or SACD formats. Ideally, these formats would be decoded using a computer with a media player application that has this functionality.

Q: 6. What is the preAmp gain on the Mic inputs? Am I going to need a cloudlifter to operate my RE-20

A: Tascam lists the gain range for the Mixcast 4 as 66.5 dB which should be sufficient for the RE-20.

Q: 7. Is this possible to use with teams/zoom meetings where I can turn off headphone monitoring, and hear audio with no feedback?

A: Yes, live monitoring can be disabled on the TASCAM Mixcast 4 Podcast Mixer, Recorder, and USB Audio Interface.

Q: 8. Is this BD-MP4K Dolby Vision compatible?

A: According to Page 22 in the manual for the Tascam BD-MP4K, it does have a Dolby Vision mode. https://www.bhphotovideo.com/lit_files/703694.pdf

Q: 9. does this unit have echo, delay, and reverb ?

A: No, the Tascam Mixcast 4 Podcast Mixer, Recorder, and USB Audio Interface does have any built-in effects like echo, delay, or reverb.

Q: 10. Dimensions?

A: The dimensions are: 11.26 (W) x 0.43 (D) x 5.83 (H) Weight: 1.32 lbs. And the Length is 5ft.