Best Rated Poe Security Camera Systems

Axton Blaze At-25we-s 530'-range Poe Illuminator With Day/night Sensor (20 X 10°)

Product Code: ga55445
Availability: In Stock

$1,799.85 $2,753.77

Qty

0 reviews Write a review

Description
Reviews (0)

The Blaze AT-25WE-S 530'-Range PoE Illuminator with Day/Night Sensor from AXTON synchronizes with your camera or other system device. Pulsed mode allows syncing with a camera shutter for industrial, machine vision, and ANPR/LPR applications. The illuminator sheds light to a range of 530'. The illuminator is IP67 rated and vandal resistant, receive power via PoE, and includes a pan/tilt U bracket for simple installation. You can link multiple Blaze illuminators together to increase coverage.

7200-Lumen Output Energy Efficient Automatic Day/Night Switch Powered via PoE I/O Ports for Seamless Camera Sync IP67 Rated Includes Pan/Tilt U Bracket

Parameters
Coverage Angle	20 x 10°
Illumination Distance	Range: 530' / 61 m HFOV: 166' / 50 m
Input Power	PoE+ (802.3at)
Input Voltage	24 to 36 VDC or 24 VAC
Power Consumption	25 W
Lumen	7200 lumens
Color Temperature	6000K
Operating Temperature	-58 to 140°F / -50 to 60°C
Environmental	IP67
Dimensions	5.25 x 3.00 x 7.25" / 133 x 76 x 184 mm
Weight	3 lb / 1.3 kg

Built-in PoE port

I/O ports for seamless camera sync

Pulsed mode allows syncing with camera shutter

Day/Night sensor

IP67-rated for outdoor use

Includes pan/tilt U bracket

Made in the USA

Related Questions and Answers

Q: 1. is there a white surface??

A: Yes, the two interior panels are white diffusion panels, one can be used as a reflector and the other one is more transparent and works better for diffusion.

Q: 2. Can this camera be controlled Via RS-422 using the older Sony RM-BR300 remote control unit?

A: Hi Kevin, Yes The BRC-X1000/1 does support the VISCA RS-422 protocal BUT connection is through an RJ-45 jack. The RM-BR300 comes with a 9-pin phoenix connector but you will have to make your own cables (page 12 & 22 of the operation manual: https://pro.sony/s3/cms-static-content/operation-manual/3854213171.pdf). -Jen

Q: 3. Does it work with RCP 1000?

A: The RCP-1000 is not listed by Sony as compatible with the Sony BCRX1000. They recommend the RCP1500 https://bhpho.to/3Eodr3Z

Q: 4. does this set contain a white reflector? or you have to use the diffusion ones as white?

A: This set only includes a 1 stop and 2 stop diffuser rather than a white reflector.

Q: 5. How small does it fold down to? Does it come with a protective bag?

A: Folds to about 18 inches around and is about 2 inches thick and it does have a protective bag

Q: 6. What is the collapsed size of this kit?

A: The collapsed size measures approximately 17 in diameter x 4 inches thick.

Q: 7. if it has sd card can it take pictures

A: Not this version. There is a more expensive version with SD card socket that can take photos and vga video. You need to use an RCA cable to transfer image into a capturing device if you buy this version.

Q: 8. Can this camera be remote controlled via the Blackmagic ATEM Advanced Panel?

A: We are not aware of this camera being controllable from an ATEM Advanced Panels.

Q: 9. Do these reflectors have a handle in the back to hold on to? Or do I need to purchase a reflector holder?

A: There is no handle.

Q: 10. Does this camera output 1080p in SDI format natively, or is there a separate card?

A: This camera has an SDI output already. It will send out a 1080p signal through SDI as is.

There are no reviews for this product.