The Cool-Lux NC1384 Ni-Cad Battery PowerBelt (13.2V/7A) features a 13.2V NiCd battery and two 4-Pin XLR connectors. Heavy-duty 16-gauge wiring is utilized with slip-proof connectors to ensure a long, reliable operating life.

The 13.2V design of the NC1384 complies with equipment manufacturers specifications, eliminating 12V battery problems. The NC1384 is designed in a 13.2V configuration with a full discharge rating of 11V. Therefore, the NC1384 will deliver its full capacity before the camera reaches its cutoff point.

Dual power outputs are included with auto reset short-circuit protection. These outputs utilize 4-Pin XLR connectors.

Part of the Black Tie Edition, the NC1384 is designed to be worn comfortably for hours upon hours. The belt wears elegantly under a suit or tuxedo jacket without looking obtrusive. The belt can be fully adjusted to fit snuggly around the operator's waist with an adjustment range from 34 to 56".

A row of three, LED lights offer the operator a close approximation of the current battery condition.

Related Questions and Answers

Q: 1. Will this work on a Sony FE 50mm 1.8?

A: Yes it will. The Sony FE 50MM 1.8, B&H # SO5018F, has an outer diameter of 68.6mm. This ring works with lenses between 68 to 69.9mm in diameter.

Q: 2. Will this ring fit the focus ring on a canon 100-400 L IS ii? I realize the outer focus ring diameter is 94mm… but after measuring with the Cool Lux Gear sizing key (paper print out), the inner diameter of the focus ring falls in the 90 to 91.9mm zone. Would it possibiy work?

A: We do not recommend using this ring as it may be too small for the lens.

Q: 3. Does it fit with the Canon 17-40 f4 L series lens, 24-105 f4 L series and 16-35 f4 L series? thanks

A: This ring is compatible with the 17-40mm F4 lens. However for the 24-105 F4 and the 16-35mm F4 you will need the Gear Ring that works with an outer diameter of 82 to 83.9mm which is BH #COLG8283. https://bhpho.to/2N5CJfx

Q: 4. Is this the proper one for the Olympus 12-40 2.8 pro?

A: The Olympus lens has a sizing of 69.9 which will be able to work with that follow focus ring.

Q: 5. Hello and thanks in advance for the help to however is going replay; I do have 2 Sony lens ( SONY FE 24-70/2.8 GM LENS and Sony FE 16-35mm f/2.8 GM (G Master) i like to use the Tilta M motor but I don't know if this ring will be spinning on the lens or it will be mooving or is the best solution comparing to the soft follow focus ring? Once more thanks Fabry

A: Tilta makes their own rings which are measured for use with these specific lenses. For both the Sony FE 24-70mm f/2.8 GM II Lens and Sony FE 16-35mm f/2.8 GM Lens, Tilta recommends the Tilta Seamless Focus Gear Ring (81 to 83mm). This is what we would recommend for use with your set up. https://bhpho.to/3EYPODd

Q: 6. Is it compatible with the Canon VIXIA HF G10 camcorder?

A: Yes it will.

Q: 7. Will this mount work with my flee world monitor? and if not is there a way to change the mount piece so that it will work with my canon Vixia hf 200?

A: Yes, this adapter will work on the Canon HF 200, and your monitor should be able to mount the adapter.

Q: 8. Will this fit a Sigma 24-105 ?

A: It will not. The Sigma 24-105mm, BH #SI241054C, has an 88.6mm front diameter. It is too large for this gear ring. Instead you will need BH #COLG8889 which is for lenses between 88 to 89.9mm. https://bhpho.to/3bnrtEK

Q: 9. Is the battery release push rod on the Cool-Lux V-mount plate 951355 metal or plastic?

A: The battery release push rod is made of plastic on this unit.

Q: 10. Is the rubber strong enough to resist the torque of a Title Nucleus motor? (Title rings are not strong enough even if they are 0.8)

A: The Cool-Lux LuxGear gear rings are designed to be compatible with all standard follow focus motors.