The 3000K Force 7 LED Ellipsoidal Light Engine from BB&S Lighting is a LED light source intended for use with optics made by other manufacturers. Using the Force 7, you can literally turn your existing traditional tungsten halogen into a LED ellipsoidal in about one minute. The light engine features a high CRI of 97+ for accurate color rendering, hybrid cooling with a heat sink / silent fan combination and 0-100% 8 or 16 bit dimming via DMX. The system runs on 100-240 VAC mains current. In and out powerCON connectors allow daisy chaining of fixtures.

For Use with Optional 3rd Party Optics    Quickly Convert Existing Optics to LED    DMX512, CRI 97+    0 to 100% Dimming    Silent Operation    Daisy Chaining    Hybrid Cooling    High Speed Strobe

No multiple shadows

Convert existing optics to LED in about one minute

Low power consumption (185W max)

Silent operation

Completely smooth full range, flicker-free dimming in either 8- or 16-bit

Superior shadow rendering

Crisp gobo projection

Clean straight cut with shutters

Microprocessor-controlled current management for power-saving long LED life

High-speed strobe

Extended color gel life

For broadcast studios, photo shoots, film and video production, theaters, concerts, museums, houses of worship, science centers, exhibitions, trades, fashion shows, events, venues, on location, and display lighting

Control locally or via DMX

Related Questions and Answers

Q: 1. Can the light be DC powered?

A: No, the Cineo Lighting LightBlade Edge LB2 LED Light (80W, 2') is an AC powered light.

Q: 2. Where can I purchase 48V power supply unit for BB&S Area 48 Studio? Are there any alternatives for the 48V power supply unit?

A: We sell the BB&S Lighting Power Supply for Area 48 Soft LED BH #BBS2054 • MFR #BBS-2054 currently through the site. But it is special order. Type BBS2054 into the B&H search bar to find it.

Q: 3. How many lumens at 100% ?

A: The manufacture does not have it rated in Lumens but in Lux and Candles. It is, 65 fc / 700 Lux at 6.56' / 2 m

Q: 4. How long does the Area 48 run on say a standard AB Dionic HC or HCX?

A: This is a very bright led light. The light at full power uses about 145 watts. A battery that is around 95Wh will last less than an hour. If you use a stronger battery or less power on the light it will last longer.

Q: 5. Can this product be battery powered?

A: Yes, the lights can use a D-tap. So you can use as long as the battery is 14 volts and either has a D-tap your get a battery plate. Like the one listed below.

Q: 6. Will they have internal batteries?

A: The Astera LunaBulb LED Bulb with Titan LED Engine does not run on an internal battery. it is AC only

Q: 7. Can this light be matched up with my existing LEDs? I have Dracast, kinitehnic Practilite 602, and the Westcott Icelight 2

A: Yes the color and saturation adjustments allow you to match the Wasp 100-C with various light sources, including production lights from other manufacturers.

Q: 8. I would like to know the details of the accessories. Does it come with a standard yoke?

A: The following unit does not offer a Y -Yoke system it features a baby 5/8" Receiver pin system that tilts and swivels.

Q: 9. Why the power supply bracket is not included? I'm supposed to use it with the power supply(which is kinda heavy) in the middle of the air...

A: Hi Marco,The Power Supply Mounting Bracket is not included as a standard item because we have 2 separate ways to manage the location of the C-Series Power Supplies.1) Our Power Supply Mounting Bracket can be used to mount the Power Supply directly on the Head itself via the Yoke's Grenade Pin Mount, or used with a Mafer Clamp to mount to a stand : a href= https://www.bhphotovideo.com/c/product/1404624-REG/hive_lighting_hive_c_psmb_power_supply_mounting_bracket.html target= _blank https://www.bhphotovideo.com/c/product/1404624-REG/hive_lighting_hive_c_psmb_power_supply_mounting_bracket.html/a2) Our 4-Pin XLR Male to Female Extension Cable for Wasp 100-C LED Light (15') can be used to extend the header cable and place the power supply 15 feet further away from the head, allowing you to leave it on the ground or anywhere else away from the unit: a href= https://www.bhphotovideo.com/c/product/1335395-REG/hive_lighting_hive_xlr4p15_4_pin_xlr_male_to_female_extention.html target= _blank https://www.bhphotovideo.com/c/product/1335395-REG/hive_lighting_hive_xlr4p15_4_pin_xlr_male_to_female_extention.html/aSince all of different customers have different needs for where they would like the power supply, we have left both of these items out of the standard kit and have made them accessories.Thank you for support and do not hesitate to email info@hivelighting.com or call (310) 773-4362 with any more detailed questions.

Q: 10. Is the weight on the specifications the shipping weight or the actual weight of the light?

A: The weight listed under the specifications for this light would be for the light in its original packaging.