The SURTD6000RMXLP3U Smart-UPS RT Battery Backup from APC is a high-performance, uninterruptable power supply that provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges. It filters small utility line fluctuations and isolates electronic

equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discharged. It can provide up to 4.3 minutes of use when running a full load of 4200W and up to 14 minutes of use when running a half load.

This Smart-UPS RT features an output of 4200W / 6000 VA, a nominal input of 208V @ 50/60 Hz ±5 Hz, an input voltage range of 156-236V (adjustable from 85-136V), four NEMA L6-30R, four NEMA 5-20R, and one NEMA L14-30R battery backup outlets, a NEMA L14-30P input connection, a surge energy rating of 480 joules, double conversion online topology, and a sine waveform output. The preinstalled AP9631 network management card provides remote monitoring and control of the UPS, while included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems. Also included are a front bezel, stabilizer brackets and screws, a top cover and screws, an SURTRK2 rail kit, and an RS-232 serial cable. Support is provided by a limited 2-year repair or replace warranty.

Output: 4200W / 6000 VA    Input: 208V @ 50-60 Hz ±5 Hz    NEMA L6-30R, L14-30R, and 5-20R    1 x NEMA L14-30P Input Connection    480 Joule Surge Energy Rating    Recharge Time: up to 2.5 Hours    Double Conversion Online Topology    Sine Waveform    Cold-Start Capable    AP9631 Network Management Card

Easy recovery from overloads with no need to replace a fuse

Helps ensure the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

Helps ensure clean, uninterrupted power to protected equipment when generator power is used

Minimizes installation costs by enabling the use of smaller generators and cabling

Protects connected loads from surges, spikes, lightning, and other power disturbances

Provides temporary battery power when the utility power is out

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery

Related Questions and Answers

Q: 1. can i control ports individually ?like scheduling shutdown for a device while keep the other running at different port?

A: The APC Smart-UPS C 1440VA with LCD does not support individually controlling the outlets.

Q: 2. how many hours of battery does this provide? when no electricity?

A: It will really depend on what you have plugged in. Please see the overview for a basic look at usage. You will need to calculate how much wattage all items being plugged in will pull for an hour and then calculate it from there.

Q: 3. How long does the battery last when the power cuts off?

A: Typical back-up and run time for 1/2 load is 11 minutes, at full load it is 4 minutes.

Q: 4. Where can I see the backup duration this battery provides for the capacity listed?

A: Thank you for your interest in our products. You can check the runtime of the UPS by going to Status Estimated Runtime on the LCD display.

Q: 5. Will the SmartConnect feature function after the warranty has expired?

A: Yes, it will still function. The SmartConnect feature of the APC Smart-UPS C Battery Backup & Surge Protector with SmartConnect is built into the UPS itself and is not limited by the duration of the warranty.

Q: 6. Do you sell the hardwired input box accessory for this UPS?

A: The APC Smart-UPS SRT1500XLA Battery Backup & Surge Protector BH #APSRT1500XLA does not have the option for hardwired input.

Q: 7. Is this unit compatible with the APC Smart Card "AP9641" - 2020 version of network card?

A: No it is not compatible.

Q: 8. Will this power up by itself after extended power outage and battery depletion, or does someone need to turn it back on?

A: The battery back up automatically takes over in case of power disruption.

Q: 9. Does this condition the power? Would it replace the need for a Furman power conditioner?

A: This unit has a conditioner in it, but it would depend on the overall setup and how you were using the Furman.

Q: 10. Follow Up question on APC Smart Card "AP9641" & SMT3000C (and also SMT2200C): Do these units *already* have less capable cards that would need to be removed to make room to make room for AP9641 ? If so: What is the best model in this form factor and VA Capacity to buy, with the goal of deploying UPS with AP9641 card?

A: Thank you for your interest in our products. You would not need to remove any card to install the AP9641. The only thing you would need to remove is the blanking panel that covers the slot where the card is installed.