Protect your AIR EVF rod from sliding out with this 15mm End Cap from Wooden Camera. This end cap is the same as the original cap and mounts onto the end of the 15mm rod that is part of the AIR EVF Mount. The black cap screws onto the end of the rod and prevents the rod from sliding off while protecting the inner rod from dust and debris. It features a notched design to make it easy to install and remove.

For AIR EVF Mount Rod    Fits on End of 15mm Rod    Protect Rod from Sliding, Dust & Debris    Notched Design, Black Color

Related Questions and Answers

Q: 1. WILL THIS WORK WITH MY RED RAVEN?

A: Yes.

Q: 2. I'm a little confused. Will these work with just a 15mm LWS rods configuration? Like bright tangerine leftfield 3 for ursa?

A: No, the Wooden Camera Universal Lens Support (19mm/15mm Studio) is designed for 19mm and 15mm Studio systems; 15mm LWS is a different standard that uses different spacing, so this will not work with 15mm LWS systems.

Q: 3. Will this work with the Sony FX3 also? Considering rod height for a matte box, etc? Other manufactures have baseplates listing both Komodo and FX3, so I'd hoping this works.

A: No. the following unit is designed and made for the red komodo Camera only.

Q: 4. Would this work with a Vazen Anamorphic Prime for mft cameras because those lenses are large and heavy?

A: Yes, the Wooden Camera Universal Lens Support (15mm LWS) is compatible with Vazen Anamorphic Prime lenses.

Q: 5. Is the 9A load from each D-tap port? Meaning the plate can provide power up to 18A total at the same time?

A: The maximum load that can be produced in any given time is 9A, with the Wooden Camera Micro Battery Slide Plate with Dual 15mm Rod Clamp.

Q: 6. Will this baseplate bring S1H to the right LWS height? Thanks.

A: The Wooden Camera Lightweight 15mm Baseplate (Panasonic BGH1) would only work with the Panasonic BGH1 properly. We recommend a cage like the following for the S1H. Kondor Blue Base Rig with LANC Handle & Baseplate for Panasonic Lumix S1H BH #KOS1HBASERIG https://bhpho.to/3BurCoF

Q: 7. Hi, I plan to buy the Rokinon 16, 35, 50, 85mm Cine DS Lens Bundle for a Blackmagic Micro Cinema (with a speedbooster), for such lenses, do I need a lens support like this at all? Thank you!

A: No I wouldnt use it with those lenses..tend to only use it with 200mm upwards...good bit of gear though that lives setup on a 400mm in my case

Q: 8. Is the camera attached plate an arca swiss mount?

A: The mount is a ARRI Dovetail Clamp.

Q: 9. Is this compatible with the Ronin DJI RS2 extended baseplate from SmallRig?

A: The Wooden Camera 15mm LWS Baseplate for RED KOMODO bottom could connect to the DJI RS2 lower plate. Please note that the top camera plate is Arca Swiss and could work with the Smaller Upper quick release on the DJI RS2.

Q: 10. Is this compatible with all gold mount batteries?

A: No, the Wooden Camera Micro Battery Slide Plate with Dual 15mm Rod Clamp (Gold Mount) is compatible with most Gold mount batteries but no 26V gold mount batteries will work.