Line 6 Spider V 60W Guitar Amplifier

Atlasied Aa60g 4-input 60w Mixer Amplifier With Global Power Supply

Product Code: ga56247
Availability: In Stock

$1,448.97 $2,245.90

Qty

0 reviews Write a review

Description
Reviews (0)

Powering 60W into 70V, 100V, and 8 Ohms systems, the Atlas Sound AA60G is a four-input mixer amplifier designed for distributed business paging, background music systems (BGM), small-to-medium speech-privacy systems, or any situation in which Music on Hold (MOH) plus paging is required. It accommodates a variety of input sources including paging microphones, CD players, digital music players, satellite receivers, and more.

The AA60G is equipped with a balanced microphone/line input that provides 15V phantom power to condenser mics and three, stereo unbalanced line inputs summed to mono. In addition to the amplifier outputs, it offers a pre-master, level-line output to connect the signal to a secondary amplifier and a Zone 2 output, which allows you to play music over a phone line while the caller is on hold.

You can maximize the AA60G's versatility using the configuration DIP switch to set the priority or VOX (Voice-Activated) background music muting modes or to create a Zone 2 mix from any or all the input sources. Other features include bass and treble controls on the master output, signal presence LED indicators, and a universal power supply.

Paging, Background Music, Music on Hold 60W into 70V, 100V, or 8 Ohms Output Balanced Mic/Line Input, 15V Phantom 3 Unbalanced, Summing Line-Level Inputs Zone 2 and Line-Level Outputs Priority Muting by Voice Threshold Dip Switch Matrix Universal Power Supply

Key Specs
Number of Channels	3
Amplifier Power Rating	8 Ohms / 70 V / 100 V: 60 W (1 kHz, 0.5% THD)
Amplifier
Form Factor/Type	Tabletop
Number of Channels	3
Amplifier Power Rating	8 Ohms / 70 V / 100 V: 60 W (1 kHz, 0.5% THD)
Performance
Frequency Response	50 Hz to 20 kHz ±1 dB
Input Sensitivity	Mic: 3 mV Line: 800 mV RCA: 400 mV
I/O Impedance	Mic Input: 2.2 Kilohms Line Input: 10 Kilohms RCA Input: 10 Kilohms
Output Level	Line Output: 1 V (10-Kilohm Load)
SNR	Mic: > 58 dB Line: > 60 dB Telephone: > 60 dB Aux: > 78 dB
THD+N	< 0.5% (at Rated Power, 1 kHz) < 0.1% (at 5 W, 1 kHz)
Crosstalk	-82 dB (1 kHz)
Connectivity
Phantom Power	15 VDC
Power
AC Input Power	Universal: 100 to 240 VAC, 50 / 60 Hz
Power Consumption	150 W
Physical
Cooling	Convection
Operating Conditions	68 to 104°F / 20 to 40°C up to 95% Humidity
Storage Conditions	-4 to 185°F / -20 to 85°C
Dimensions	8.2 x 3.5 x 11.6" / 210.0 x 90.0 x 295.0 mm
Weight	9.4 lb / 4.3 kg
Packaging Info
Package Weight	12.43 lb
Box Dimensions (LxWxH)	15.65 x 11.05 x 6.95"

Ideal for paging, background music, and Music-on-Hold applications
Accommodates a variety of input sources including paging microphones, CD players, and digital music receivers
Four inputs, each with a front panel volume control and a single output channel
60W into 70V, 100V, or 8 Ohms output
Output power matches AtlasIED FAP, SM, SD, and GD Series loudspeakers (available separately)
Five-terminal Euroblock connector for balanced mic/line input
Three unbalanced stereo line-level RCA-type connectors, summed to mono
Priority muting by VOX or external switch
Dip switch selectable matrix allows the creation of a Zone 2 mix from any or all the input sources
Secondary Zone 2 output 1W & 600 Ohms/MOH (Music on Hold)
Bass and treble controls on master output
Pre-master, line-level output to connect signal to a secondary amplifier
Universal AC power supply for use in any 120 to 240V country
15V phantom power for condenser microphones
Signal presence LED indicators

Related Questions and Answers

Q: 1. Is there a Warranty with this product?

A: Bogen offers a two year limited warranty with this product.

Q: 2. do you have to have a special module for tel intercom?

A: thank you for your question. To connect tel intercom you would need to purchase the BH# BOTEL1S Bogen Communications TEL1S Telephone Input Module.

Q: 3. Hi, Does the amp include the power supply?

A: The Atlas Sound Time Saving Devices TSD-PA252G does not ship with power supply. It must be purchased separately.

Q: 4. What is the input Amperage for these?

A: thank you for your question. This adapter runs 100 VAC to 240 VAC with an output voltage of 24V and current of 250MA

Q: 5. Does this work with the HyperDeck Studio HD Mini's?

A: No, the best choices for the Black Magic Hyperdeck Studio HD Mini are listed below. Non-Locking Blackmagic Design 12V Power Supply for Select Hardware BH #BLPSUSP Locking Blackmagic Design International Power Supply for Video Assist 12G (12 VDC, 36W) BH #BLPWRSPVA12G

Q: 6. Does it works with sdi extreme iso ?

A: Yes, the Blackmagic Design Power Supply for ATEM Mini Extreme (12V, 60W) will power the Blackmagic Design ATEM Mini Extreme ISO, which also runs on a 12v current.

Q: 7. Does the included power supply for the DT20 have switchable American and UK plugs?

A: Yes, the Allen & Heath DT20-X Dante Input Interface with Power Supply comes with switchable American and UK plugs.

Q: 8. How do I connect 2 speakers up to the amp

A: This Amp is a 70V output amp, that enable you to connect multiple speakers in parallel. you will need to follow the polarity on the Amp and the speakers, the speakers also have to be 70V speakers.

Q: 9. Does this AC plug work with the Hyperdeck Studio HD Mini's?

Q: 10. Is this compatible with the studio 4k plus cameras?

A: Yes, the Blackmagic Design Power Supply for ATEM Mini Extreme (12V, 60W) can be used to power the Blackmagic Design Studio Camera 4K Plus.

There are no reviews for this product.