Teradek Bolt Manager
- Product Code: ga56644
-
Availability: In Stock
The Teradek Bolt Manager makes it easier to configure a fleet of Bolt wireless hardware. Using the five USB ports, connect your Bolt hardware and have the Manager pair multiple receivers simultaneously to a single transmitter, change wireless channels, and configure regional settings. USB cables for connecting Bolt devices, antennas, a D-Tap power cable, and an Ethernet cable are included.
Note: Bolt Manager's pairing feature is only compatible with Bolt 500, 1000, 3000, 10K, Sidekick II / XT / LT, and newer
Pairing and Fleet Management Quickly Configure and Pair Bolt Hardware 5 x USB Ports Pair up to 4 Receivers Simultaneously Wi-Fi and Ethernet Connectivity Front Panel and Web GUI Control No Computer Required
| Parameters | |
|---|---|
| Networking | Ethernet: 10/100Base-T Wireless: Dual band MIMO 802.11 a/b/g/n Wi-Fi |
| USB Ports | 5 x USB 2.0 Type-A host ports 1 x USB 2.0 Mini-B upgrade port |
| Power | Input: 1 x 2-pin, 6-28 VDC |
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Dimensions | 5 x 5 x 2" / 12.7 x 12.7 x 5.1 cm |
| Weight | 8.7 oz / 247 g |
| Packaging Info | |
| Package Weight | 2.1 lb |
| Box Dimensions (LxWxH) | 6.7 x 6.6 x 4.8" |
Related Questions and Answers
Q: 1. can the V Mount plate be easily removed for use without it?
A: The V-Mount battery plate can be removed on the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver (V-Mount).
Q: 2. Can the receiver accept more than one Tx signal & output those multiple signals at the same time to one monitor?
A: No, the Teradek Bolt 6 LT 750 transmitter (TX) can only send one signal to up to six Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receivers (RX).
Q: 3. Does this work with the Bolt 4K series?
A: Yes, the Teradek 6G Flexible "Mushroom" H Antenna for Bolt 6 is compatible with the Teradek Bolt 4K series.
Q: 4. Can the transmitter be powered from the usb-c port?
A: No, The Teradek Bolt 6 LT can not be powered via USB-C.
Q: 5. If the Tx is fed signal via HDMI, will the local BNC loop thru / output transcode that signal lien the older 500 units did?
A: Yes, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter supports HDMI cross conversion. This would allow the HDMI input to output through the 3G-SDI. The Teradek Bolt 6 also would downscale 4k signals from HDMI to HD when outputting via the 3D-SDI.
Q: 6. Does the SDI port support 1080P 59.97 In and Out of the transmitter and receiver?
A: No, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit (B&H # TE102260) does not support 1080p at 59.94 fps. The video format is only available through HDMI, though the 3G-SDI port can support 1080i at 59.94 fps.
Q: 7. Does it come with two power supply units one for the receiver and another for the transmitter?
A: The Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit only comes with one power supply unit included. A compatible power supply would be the Teradek 18W AC Adapter to 2-Pin LEMO (6'), BH #TEBIT056.
Q: 8. Can I use more than one tx / rx pair in the same environment?
A: It should theoretically be possible to use 6 Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kits in a single location if you are all using fixed frequencies and there is minimal external interference in the area. The spacing of the equipment will also be incredibly important. With the Bolt 6 you'll want to have at least 10 feet between the transmitter and the receiver, and between other sets. If more receivers are used in a set this will impact the communication even more so. The Bolts operate in the unlicensed 5 GHz spectrum which can be use by other devices like WiFi routers, other wireless transmitting systems, etc. Here is an article that may be helpful: https://support.cs.inc/s/article/Bolt-4k-Best-Practices-for-Interference
Q: 9. Does Transmitters have a vmount plate? or is this only for the receivers?
A: While the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) only has a V-mount plate for the receiver, you could add the Teradek Single-Battery Plate for Bolt (Female, V-Mount), B&H # TE110854, to the transmitter.
Q: 10. Can I pair two Bolt 6 Transmitters to a single Bolt 6 Receiver?
A: The Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver can only connect to one transmitter.
Top Bestselling Products
Nebtek Power-tap Male To 2-pin Lemo Bolt Power Cable (18")
$387.00 $468.27
Nebtek 3-pin Fischer Male To 2-pin Lemo Bolt Power Cable (24")
$567.00 $884.52
Nebtek 4-pin Xlr Male To 2-pin Lemo Bolt Power Cable (3')
$357.00 $453.39
Smallhd Color Band For Ultra 7 Bolt 6 Rx (yellow)
$14.97 $22.16
Smallhd Ultra 5 Bolt 6 Tx 750 Monitor With Control Kit For Arri
$11,397.00 $15,271.98
Insta360 Usb-c To Lightning Power Cable (6.2")
$44.97 $70.60
Apple Usb-c To Lightning Adapter
$87.00 $132.24
Kramer Lightning To Usb Sync & Charge Cable (3', White)
$45.60 $55.18
Mophie Charge Stream Usb-c To Lightning Cable (10')
$73.56 $98.57
Apple Lightning To Usb-a Male Cable (3.3' / 1 M)
$57.00 $76.38
Apple Usb-c To Lightning Cable (3.3' / 1m)
$57.00 $73.53
Rode Sc21 Lightning To Usb-c Cable (red, 11.8")
$75.00 $103.50
Rode Sc21 Lightning To Usb-c Cable (purple, 11.8")
$75.00 $102.00
Moshi Iongo Duo With Usb-c And Lightning Cable (ocean Blue)
$359.85 $575.76
Moshi Iongo 5k With Usb-a To Lightning Cable (ivory White)
$209.85 $264.41
Anker Bio-braided Usb-c To Lightning Cable (white, 10')
$68.97 $100.01
Products You May Like
Waves Redd - Channel Strip Plug-in (native/soundgrid, Download)
$747.00 $993.51
Canon Bci-1431c Cyan Ink Tank (130 Ml)
$294.00 $429.24
Datavideo Ptc-150 Hdmi/sdi Ptz Video Camera (black)
$4,497.00 $6,250.83
Ugreen 3-port Usb-c Power Bank (25,000mah, 145w)
$299.97 $476.95
Bugera Ultrabass Bxd15 1000w 15" Bass Combo Amplifier
$1,257.00 $1,898.07
Inkpress Media Pro Matte Canvas (11 X 17", 10 Sheets)
$63.90 $91.38
Bigblue Snoot38 Adapter For 1200-series (2018) Dive Light
$158.97 $252.76
Provider Series Ps-imk Instrument Microphone Kit (akg Ta3-f)
$1,497.00 $1,946.10
K&m 12270 Clamp-on Music Stand Light (twin Head, Black)
$173.97 $210.50
