This Sevenoak Lightweight Carbon Fiber Camera Slider is a lightweight easy-to-position slider which can support loads up to 15.4 pounds. The large carriage features a 3/8"-16 mounting screw that accommodates fluid heads of various sizes. It glides smoothly along the 18mm rails and features four guide rollers that ride along the outside of the rails. Two additional rollers press against the inside and allow you to adjust the tension of the carriage.

In addition to a 3/8"-16 mounting screw, there are two sets each of 1/4"-20 and 3/8"-16 threads on the carriage that are useful for mounting optional accessories. At the ends of the slider are angle-adjustable legs with height-adjustable rubber feet for leveling on uneven terrain. The carbon fiber slider rails are threaded and accept extension rails (not included), enabling you to extend the length of your slider. A padded carrying case is included for storage and transport.

Roller-Bearing Sliding System    4 x Track Rollers    2 x Tension Rollers    15.4 Pound Load Capacity    Lightweight 18mm Carbon Fiber Rails    Adjustable Legs for Leveling    Large Carriage with Accessory Threads    Available Extension Rails    Padded Carrying Case

• Durable and lightweight construction
• 18mm carbon fiber rails
• 15.4 lb load capacity
• Large camera carriage
• Four precision-sealed bearings on aluminum rollers guide the carriage along the rails
• Two roller bearings on a rotating platform on the underside of the carriage are used to provide adjustable tension to regulate the speed of the slider
• Mounted on the side of the carriage is a knob that tightens and holds the carriage in place
• 1/4"-20 and 3/8"-16 accessory mounting threads on carriage
• The carriage incorporates a bubble level
• Adjustable outrigger legs for leveling
• Center-mounting platform accepts 1/4"-20 and 3/8"-16 mounting studs, such as can be found on tripods or light stands
• The end blocks each feature 1/4"-20 and 3/8"-16 threaded mounting holes for accepting supports
• The integrated spring-loaded feet rotate on a rosette system so you can level the slider, tighten the legs, and not worry about the legs slipping

Related Questions and Answers

Q: 1. Can this slider operate in shoot-move-shoot mode as a slave, e.g. to a Timelapse+ View ramping intervalometer or Syrp Genie Mini II?

A: For Time-Lapse Shooting the GP-80QD motorized video slider supports, moving at preset intervals set by the user. You can set slip speed, slip intervals, stop time, photo number, and auto loop.

Q: 2. Must this slider be disassembeled for transport?

A: No. The following unit can travel as is. We only suggest removing the head before travel.

Q: 3. What's the maxium length of a timelapse you can do with this? I'd like to do a 3-4 days timelapse.

A: Like most any time lapse, you can do so for a long as you wish. The issue is more getting power to the device. You will need to research time lapse calculations to get a grasp of the process.

Q: 4. I'm trying to find a new slider. What is the difference between this one and the GVM GP-80QD?

A: The Slider 80 is wireless and the 80 QD is wired, also Slider 80 is updated motor so it is quieter.

Q: 5. what's the difference between this and GVM GP-120QD model? Only IOS/Android APP support?

A: The most notable difference between the GVM Wireless Carbon Fiber Motorized Camera Slider (47-) (GVMSLIDER120) and the GVM GP-120QD (GVGP120QD) Motorized Carbon Fiber Video Slider (48") is that GVMSLIDER120 can be controlled via app and that GVGP120QD is controlled with a wired remote. GVMSLIDER120 is also listed at 47" and GVGP120QD at 48".

Q: 6. What is the fastest it will travel from end to end?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (47") at its fastest speed takes 18 seconds to travel from one end of the slider to the other.

Q: 7. Can this slider be setup in a way that it keeps moving during timelapse shooting? I would like to get motion blurring by shooting with long exposure times and camera movement during the exposure of each frame.

A: This GVM slider and most any slider during time lapse will stop for each captured frame. You would use Editing applications to create the Blur in post.

Q: 8. Does this do tacking the same way as the "GVM GP-120QD Motorized Carbon Fiber Video Slider (48")" ?

A: Yes. The following unit supports parallax tracking shot or 120° panoramic shot.

Q: 9. Can the slider be set so that the camera remains focused on a single point as it slides instead of focused outward for a panorama? Specifically I'm thinking of using this for table top product shots(video) for slow pans past the product.

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (47") can focus on a point through the slide by adjusting the parallax bar accordingly before the shot.

Q: 10. The specs state the horizontal load limit is 11 lbs. What is the vertical load limit?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (31") cannot handle a vertical load.