Capture brilliant images at depths as great as 200' with your Nikon D800 or D800E DSLR in Ikelite's 200DL Underwater Housing. An Ikelite bulkhead with a manual hot shoe connection enables reliable electrical triggering of external strobes via sync cords; add the separately sold Nikon TTL Converter # 4301.3, NT2 Nikon TTL Hotshoe # 46064, and a compatible Ikelite DS strobe for fast, accurate TTl flash. Non-Ikelite strobes will work in manual mode only.

Ergonomic mechanical controls, including push-buttons, dials, and levers, afford access to most camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS plastic blend. It is white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray with a left-hand quick-release grip affords improved balance and handling, while offering an attachment point for an optional lighting arm.

The housing ships without a required lens port, and accepts various, interchangeable dome and flat ports for a broad array of lenses. For full compatibility details, see the port chart. The DL port system accommodates lenses with large diameters, and provides added security against leaks at the surface, thanks in large part to the included vacuum valve for checking watertight integrity before the dive. You'll need to pick up the required pump in order to remove excess air and actually create a vacuum.

Depth Rating: 200'    Ikelite 5-Pin Bulkhead Strobe Connector    Manual Flash Exposure, TTL Optional    Mechanical Controls    Access to All Essential Camera Functions    White ABS/Polycarbonate Body, Clear Back    Interchangeable DL Lens Port System    Ships Without Required Lens Port    Vacuum Valve Included    Made in the USA

• Depth rating of 200'
• Made by hand in the USA from a corrosion-resistant polycarbonate and ABS plastic blend
• White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water's surface
• Clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls
• Nearly neutral buoyancy in fresh water
• Open-groove design suspends the rear O-ring in the natural position, allowing for easier maintenance and preventing accidental twisting or stretching
• Front-loading mounting plate enables quick camera installation, and does not need to be removed in order for you to gain battery or memory card access
• Mounting plate has a 1/4"-20 threaded hole on the bottom for connection to an optional tripod

• Ikelite ICS-5 bulkhead connector with a manual hot shoe connection enables reliable electrical triggering of strobes
• Optional #46064 NT2 Nikon TTL hot shoe and #4301.3 Nikon TTL Converter enable TTL operation with compatible Ikelite DS strobes
• Exposure compensation can be adjusted using the control in the camera
• Non-Ikelite strobes work in manual mode only
• Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes
• Bulkhead on top of enclosure to keep the cord out of your way and reduce strain on the ends

• Extra-large, soft-touch zoom knob next to grip handle
• Push-buttons are machined and hard anodized aluminum to reduce weight and resist salt build-up
• Ergonomic mechanical push-buttons, dials, and levers afford access to all camera functions except: focus selector lock, metering selector, diopter adjustment control, eyepiece shutter lever, release mode dial, release mode dial lock release, flash pop-up button, depth-of-field preview button, Fn function button
• Control symbols are laser-etched into the back of the housing, so they won't fade or fall off with time
• Supereye Viewfinder enhances your view through the camera's OVF when you're wearing a mask
• You can remove the Supereye quickly if you'd like to attach the optional Straight or 45° Magnified Viewfinder instead
• Machined aluminum tray with a left-hand quick-release grip affords balance and handling, while offering an attachment point for an optional lighting arm
• Optional right-hand grip can be added easily
• 1/4"-20 mounts and other mounting points enable connection to a tripod and the addition of accessories<
• Another 1/4"-20 threaded mount is located front and center on the housing above the port mount, allowing for the attachment of a focus light, GoPro action camera, or other lightweight piece of equipment
• Optional Cable Grip or Aluminum Top Handle can be added for easier carrying if you're using 2 strobes

• Ships without a required lens port
• Accepts all Ikelite Dry Lock (DL) dome and flat ports, allowing you to shoot with a wide variety of lenses
• Zoom gears are available for many lenses
• For complete compatibility details, see the port chart linked above
• DL port system accommodates lenses with large diameters
• Provides added security against leaks at the surface, thanks in large part to the included vacuum valve that helps you check watertight integrity before the dive
• #47011 pump is required in order to remove excess air and actually create a vacuum
• DL mount can be removed and replaced by the older FL (Four Lock) port locks, though this change would be irreversible unless you sent the housing back to Ikelite to have the DL mount installed again

Related Questions and Answers

Q: 1. as a beginner in underwater photography, does this housing fit an EOS R with Canon 16-35mm f/2.8 iii without any extra items needed?

A: You will need in addtion to the housing, the following items; Zoom Gear; https://bhpho.to/2PgyzTC Dome Port; https://bhpho.to/36sGQcF Port Extension; https://bhpho.to/2qNeD1d 50MM port Extension; https://bhpho.to/35idI7I

Q: 2. What length lens does this fit?

A: The Ikelite Sony A7IV pictured here does not come with the required domes/ports. For typical use, you would purchase the dome/port that matches the lens you plan on using. We are unable of sharing external links via this system, but please visit Ikelite's website and they have an extensive list of the ports required to fit the 71479 housing.

Q: 3. So the Ikelite DL 8" Dome Port is not included as well?

A: Yes, Ikelite 200DL Underwater Housing for Canon EOS R5 Camera BH #IK200DUHER5M doesn't include the Ikelite DL 8" Dome Port.

Q: 4. Which port could I use with the FTZ adapter + Nikon 20mm 1.8? It does not appear to have any non-fisheye wide angle options in the port chart.

A: To use the Nikon AF-S Nikkor 20mm f/1.8G ED with the FTZ adapter with the Ikelite 200DL Underwater Housing for Nikon Z 7, Z 7II, Z 6, & Z 6II Mirrorless Digital Cameras Ikelite suggests this port and extension, BH #IK7534 (https://bhpho.to/4bsLby1) and BH #IK7502 (https://bhpho.to/3UyIZOE). Note that specific lens has not been tested.

Q: 5. Does this come with the left handle?

A: No. Please review the following Ikelite Right-Hand Quick Release Handle with Extension for Modular Tray Base BH #IK407702 • MFR #4077.02 https://bhpho.to/3f1CKlh

Q: 6. Can you switch between photo/video mode?

A: You could switch between photo and video mode when the Sony a7 IV camera is in the Ikelite Underwater Housing for Sony a7 IV.

Q: 7. Does this housing fit a 15-35mm RF lens?

A: The Ikelite 200DL Underwater Housing for Canon EOS R Mirrorless Camera does not include a lens port. You need to buy items to match the lens you will be using. To use the Canon RF 15-35mm f/2.8L IS USM Lens you need the following: 1. Ikelite DL 8" Dome Port BH #IK75340 • MFR #75340: https://bhpho.to/2UrAQ1c 2. Both the Ikelite DL 28mm Port Extension BH #IK75028 • MFR #75028 and the Ikelite DL 50mm Port Extension BH #IK75050 • MFR #75050 has to go between the housing and the port: https://bhpho.to/3774b3u https://bhpho.to/2tAmCzY 3. Ikelite Zoom/Focus Clamp and Gear Sleeve Set BH #IK55093 • MFR #5509.30 needs to go on the lens so you could control the zoom: https://bhpho.to/3888Pj9 Housings with a serial number of 72644 and lower require to be modified by Ikelite to use this lens.

Q: 8. Which lens should I use with this housing?

A: The Ikelite 200DL Underwater Housing for Sony a9 III would require a DL Port Extension to use for varying lenses. Depending on the lens size, there would be a port size that would accommodate the lens. Here are the Ikelite DL Port Extensions: https://bhpho.to/4bDVzTO

Q: 9. Does it comes with the lens tube? If not, what should be added for a 24 - 70 f2.8 Nikon S .

A: Port extensions (sometimes called lens tubes) and dome ports are additional purchases. Please click on the [Accessories] button above and then on "Lens & Lens Port Accessories" to see them.

Q: 10. Will this housing fit EF lenses with an adapter or only RF? For example I have the EF 16-35mm f/2.8 iii but not sure if this housing would be compatible.

A: Yes the Canon 16-35 f2.8 Mark 3 EF lens is compatible with the Ikelite 200DL Underwater Housing for Canon EOS R Mirrorless Camera when using the Canon EF to RF adapter.