Add colorful flares to your photos with the Micro Four Thirds Mount to Minolta MD Lens ArtFX ColorFlare Adapter from FotodioX. This adapter intentionally lets light in between the lens and image sensor to create a natural, controllable flare to your photos or videos. A transparent slit sits at the base of the mount and can be covered by one of five transluscent colored bands. Simply slide your desired color (orange, red, green, blue, or purple) onto the adapter and begin shooting. Two of the included black light blocking bands have holes in them for even more precise control over the flares. The solid metal construction of the adapter ensures it will hold up with use.

Be aware that autofocus, image stabilization, metering, and other electronic lens functions will be disabled when the adapter is used. 

Micro 4/3 to Minolta MD Lens    Adds Flare or Light Leak to Photos    Interchangeable Color Bands    Solid Metal Construction

Related Questions and Answers

Q: 1. how are you going to not show an example?

A: You may visit the manufacturer's website or their YouTube page to view examples of the FotodioX ArtFX ColorFlare FUSION Smart AF Adapter.a href= https://fotodioxpro.com/products/artfx-clrflr-eos-snye-fusion target= _blank https://fotodioxpro.com/products/artfx-clrflr-eos-snye-fusion/a

Q: 2. Has there been a firmware update that allows the touch focus of the BMPCC 4k to work with EF lenses?

A: It is our understanding that this will work with the Pocket 4K touch focus.

Q: 3. When using vintage lenses, is there some cropping going on ? Or does focal distance stays the same?

A: There will be a crop factor of 2x going from a 35mm SLR lens to a MFT digital sensor. All your lens will have an angle-of-view equivalent to double their focal length. For example, a 50mm lens will look approximately 100mm, a 35mm like a 70mm, etc.

Q: 4. Is there an adapter for a Sony e mount lens to be used on an Olympus m4/3 camera?

A: Unfortunately, B&H does not carry an adapter that would enable one to mount an E-mount lens onto a micro four thirds camera, nor am I aware of one existing on the market. The Sony E-mount has a shorter flange focal distance (register) than the micro four thirds mount, so the Sony E-mount lenses are designed to sit closer to the sensor than the micro four thirds mount will allow. So, mounting an E-mount lens onto a micro four thirds body, the lens would lose infinity focus (the ability to focus on objects in the distance).

Q: 5. Does this give a full frame field of view or a super 35?

A: This adapter only changes the effective focal length of a lens by 0.71x plus it essentially provides about 1 extra f-stop. For example if you were using the Canon 60mm f2.8 lens on your camera with a regular adapter (not a booster), the lens would look as if you were using the Olympus 60mm f2.8 lens. Using the booster, the Canon lens would look more like a 43mm lens but the aperture would be equal to f2.

Q: 6. Can this be use with any lens or just Minolta's? a href= http://www.bhphotovideo.com/c/product/699815-REG/Bower_AB43MD_AB43MD_Micro_Four_Thirds.html/mode/edu target= _blank http://www.bhphotovideo.com/c/product/699815-REG/Bower_AB43MD_AB43MD_Micro_Four_Thirds.html/mode/edu/a

A: Hey Joe,I have bought this adapter due to having never gotten rid of my Minolta 35mm lenses, and they work well with it. I have not tried any other lens, and assume that the adapter would work with any 'M' marked lens, but I can not be sure. If you can verify that the lens in question worked with a Minolta camera body, then it should work.That's what I know.Mike

Q: 7. When pair this adapter to Canon EF 70-200mm f/2.8L USM Lens on a OM-D E-M5 Mark II, does it work? What zoom range and aperture the lens will produce?

A: Yes, the Metabones T Speed Booster Ultra 0.71x Adapter for Canon Full-Frame EF-Mount Lens to Micro Four Thirds-Mount Camera can be used to adapt the Canon EF 70-200mm f/2.8L USM Lens to the Olympus OM-D E-M5 Mark II Mirrorless Camera. With this adapter one reduces the crop factor from 2.0x to 1.4x, and one gains a stop of light. What you will have in effect is a 98-280mm f/2 lens.

Q: 8. Will this adapter also work with Minolta SR mount lenses (XG-1 body) ? Are SR and MD the same mount? TIA

A: Yes, the Vello Minolta MD Lens to Micro Four Thirds-Mount Camera Lens Adapter will also accept Minolta SR lenses. Minolta MD and SR have the same mount.

Q: 9. Will this adapter allow Minolta MD lenses to focus to infinity? What I'm really asking if if the thickness of this adapter is exactly the same as the non-shift ones.

A: Yes this adapter supports focusing to infinity with Minolta MD lenses on Micro Four Thirds cameras. It is not the same thickness at 1.5 (3.81 cm) as the standard adapter at 1.0 (2.54 cm), but maintains infinity focus according to the manufacturer.

Q: 10. Does this adapter support Minolta MC lenses also?

A: Yes, this Vello adapter can also support Minolta MC lenses.