Print your 3D model in water with the NinjaTek Cheetah 3mm 95A TPU Flexible Filament.

With a shore hardness of 95A, this thermoplastic polyurethane (TPU) flexible filament has 76% better abrasion resistance than PLA and 40% better abrasion resistance than ABS. The filament also has significantly better impact strength than widely used materials, including up to 84% better impact strength than ABS. At 580% elongation, the filament can handle wear and tear. The patented low-friction exterior allows for smooth feeding into an extruder. It is also resistant to many chemicals, such as naphtha, ASTM oils #1-3, petroleum, and freon.

3mm Filament Diameter    95A TPU Flexible Material

Related Questions and Answers

Q: 1. I have a Magnus Taj-200 mini tripod that I purchased from you about 1 year ago. I noticed that I lost one of the rubber feet in my travels. How do I go about replacing it?

A: Unfortunately we do not carry the part you are in need of. You would need to contact Magnus directly for a replacement. They are a division of a company called the Gradus Group. See their contact information below:Gradus Group LLC:Phone: 212-594-2120Email: info@gradusgroup.comhttp://www.gradusgroup.com/contact.html

Q: 2. Will this support a Canon 7D with a 28-135 kit lens?

A: The Magnus MegaGrip Flexible Tripod has a maximum load capacity of 3.3 lb (1.5 kg). The combined weight of the Canon EOS 7D DSLR camera is 2.99 lbs. While the Magnus MegaGrip Flexible Tripod would support the camera, you may wish to consider an option that has a higher maximum load capacity, such as either the Joby GorillaPod SLR-Zoom Flexible Mini-Tripod - Black/Red, B&H # JOGSZR, or the Joby Gorillapod SLR-Zoom Flexible Mini-Tripod, B&H # JOGPSLRZ. If you need a ball head, the Joby Gorillapod SLR-Zoom Flexible Mini Tripod w/ BH1-01EN Ball Head, B&H # JOGPSLRBH, would then work for your needs.

Q: 3. What plastic material is this filament?

A: The BuMat Elite 1.75mm Flexible Filament (1kg, Orange) are produced with TPU and PLA materials.

Q: 4. A flash bracket is typically quick to rotate from horizontal to portrait mode. Is this too stiff to bend without putting pressure on the camera hotshoe? Thanks.

A: The flexible rod will easily bend to 90 degrees and beyond (The manual says 180, for whatever good that would do). If you bend it before you attach it to the hot shoe you can avoid some accidental strain. However, you will still have the offset weight of the flash unit and part of the flexible TTL rod. Additionally you will need to be careful with the flash unit installed because it can add 16-18 to the height (or width) of the camera. If you bump this into something I believe it would be possible to damage the hot shoe.

Q: 5. Is this food safe?

A: This would not be suggested for food safe use.

Q: 6. does it support up to 144hz?

A: The Kramer C-MDPM/MDPM Flexible DisplayPort Cable (3') B&H # KRCMDPMMDPM3 is capable of up to 4K@60Hz (4:4:4).

Q: 7. The tripod has 2 different size HEX head screws, yet you are only supplied with one Allen wrench. Why?

A: The included Hex / Allen wrench is to be used to remove leg segments and adjust rigidity of the tripod. This is for the screw that is under the rubber ring on the leg segments.

Q: 8. My son has the Kodak PIXPRO SP360 Action Camera with Extreme Pack will this tripod work with this, or do I need to have the mini ball kit too? Thanks.

A: This tripod has a standard screw thread. Viewing images of the Kodak camera of your child, I think so would serve properly. I used it with dslr cameras, point and shoot, and gopro (with an adapter to gopro because she does not bring thread)

Q: 9. Can the top edge of the hood be adjusted closer to the camera than the bottom if the camera needs to be angled downwards when shooting through a one-way mirror?

A: Angling the camera lens within the hood would present no problem at all. This is an excellent product. I have used this hood many many many times traveling on the trains in Europe. It has allowed me to take photos from the train in situations where the reflections on the train windows made it otherwise impossible. Highly recommended product.

Q: 10. Many reviews indicate this case being used with phones other than Pixel 4a 5g - Is it some sort of universal case and not one made for Pixel 4a 5g?

A: The, AVODA TPU Case for Google Pixel 4a 5G (Clear) BH #AVDGP4A5GCC is specifically designed for the Google Pixel 4a. Avoda makes this case for several different phone models and reviews are gathered from other models.