Designed to give you the tactical edge in the dark, the Streamlight TLR-6 Compact LED/Laser Weaponlight combines a 100-lumen, single-output LED light with a Class 3R 660nm red aiming laser installed in a custom housing that specifically fits the body and trigger guard contours of Sig P238 or P938 pistols to give it a seamless look with a more secure mounting. Built out of a strong and durable polymer material, the housing is impact and water resistant with a broad operating temperature range.

The light is outfitted with a parabolic reflector that produces a beam with a tight center cone of bright light and a dimmer ring on the periphery to help maintain situational awareness while fully illuminating your target, and windage & elevation screws allow you to boresight the laser to the pistol for accurate aiming. An ambidextrous switch system controls the momentary and constant-on activation, plus the three different modes, with simple push buttons on both sides of the housing that are easily accessible with your support hand while allowing you to keep a firm grip on your weapon.

Fits Contours of the Trigger Guard    Single 100-Lumen White Light C4 LED    Class 3R 660nm Red Aiming Laser    Windage & Elevation Laser Adjustment    Ambidextrous Push Button Switches    Light, Laser, Light+Laser Modes    Impact-Resistant Polymer Housing    IPX4-Rated, Water Resistant    Runs on Two Included CR1/3N Batteries    Digitally Regulated Output

• Designed for duty use, compact enough for EDC
• Single 100-lumen output
• One bright white C4 LED
• Parabolic reflector produces a beam with a bright center and generous spill that illuminates the subject while preserving situational awareness
• Digitally regulated output maintains consistent beam intensity throughout the life of the battery

• Red lasers are more easily seen in bright light and sunlight
• Class 3R laser
• 640-660nm peak wavelength
• <5 mW maximum output
• Windage and elevation adjustment screws to boresight it with the pistol

• Location: Sides
• Type: Two side push buttons
• Tap either switch to turn on/off; Press & hold for momentary activation
• Press & hold one switch while tapping the other to toggle between light, laser, and light+laser modes
• Last mode memory returns light to previously selected mode when it is turned on
• 10-minute auto shutoff conserves battery power

• Impact- and chemical-resistant polymer housing
• Compact and lightweight design provides critical illumination without adding excessive bulk and heft
• Molded housing design matches the contour of the trigger guard for a secure and seamless fit
• Specifically designed to fit Sig Sauer P238 and P938 pistols
• Clear and scratch-resistant glass lens
• IPX4-rated to be resistant against driving rain and splashing water
• Impact resistant to 3.3'
• Broad -20 to 120°F operating temperature range
• Batteries can be replaced while light remains mounted—no need to re-sight laser after battery change
• Runs on two included CR-1/3N lithium batteries
• Etched serial number for positive identification

Related Questions and Answers

Q: 1. Which lock comes with the Nightstick, The trigger guard lock in video, or cable lock?

A: In the Box Nightstick TSM-12G Rechargeable Sub-Compact Weaponlight with Green Laser Trigger Lock MagMate Charger Cable Allen Wrench Limited Lifetime Warranty The two glass-filled nylon plastic housings of the TSM-12G is designed to lock onto the front of the pistol's trigger guard for secure installation and the lowest profile possible. The weapon light includes a Nightstick MagMate™ USB magnetically coupled charger, a combination gun lock for secure charging, and an Allen screwdriver for installation and laser aim adjustments.

Q: 2. Is this printer compatible with Mac OS, particularly OS 10.13.6?

A: The Brother HL-L2460DW Compact Monochrome Laser Printer has no supported drivers for any Apple operating system versions earlier than MacOS 11.x.

Q: 3. What are the differences btw this and the HL-L2460DW model? Why are all the reviews from product testers?

A: There are no technical differences between the Brother HL-L2460DW XL, B&H #BRHLL2460DWX, and the Brother HL-L2460DW, B&H # BRHLL2460DW. The only difference is the amount of toner included. The Brother HL-L2460DW XL includes a black toner cartridge, which yields approximately 5,000 pages. The Brother HL-L2460DW, B&H # BRHLL2460DW, comes with starter toner that yields approximately 700 pages. This is a new model, and currently, there aren’t as many reviews.

Q: 4. Will this fit a Beretta PX4 compact pistol?

A: Yes it is compatible.

Q: 5. Will this cap fit my Yashica Mat 124G? if not, is there one here that will?

A: Yes, it will fit.

Q: 6. Does this stylus light come a a removable cap or snoot to narrow to light beam?

A: Yes

Q: 7. Will this fit a Yashica A TLR? The lenses on the A are not the same size, and this cap looks like both covers are the same size.

A: Hello- This will not fit(for later bayonet lens). I have been looking as well. The Yashica A has 2 32mm diameter lens'. I purchased 2 32mm lens caps and they work fine. Another option is to get the 32mm rifle scope caps that flip up. You will need 2.

Q: 8. will this fit Kimber micro 9mm ?

A: According to the manufacture the Streamlight TLR-6 Compact LED/Laser Weaponlight for Kimber Micro Pistols BH #STTLR6ERMICR • MFR #69276 will Fits Contours of the Trigger Guard

Q: 9. will this fit a Kimber 380?

A: According to the manufacture the Streamlight TLR-6 Compact LED/Laser Weaponlight for Kimber Micro Pistols BH #STTLR6ERMICR • MFR #69276 will fit the contours of the trigger guard.

Q: 10. Will this fit an older Minolta TLR...the minoltaflex iii?

A: No, the Nisha Yashica TLR/Bayonet 1 Lens Cap does not fit the Minoltaflex III.