Designed to be used with the Ubiquiti Networks UAP-AC-M Access Point, the Ubiquiti Networks UniFi Directional Antenna features dual-band, dual-polarity operation along with support for the 802.11ac Wi-Fi networking standard. Installation is simple, as this antenna can be installed to work in a variety of environments, thanks to the included installation kits. It is even possible to aim the antenna in a specified direction thanks to the three-axis ball joint. Once installed, the UV stabilized plastic enclosure ensures this antenna will stand up against the elements.

Optimized for 802.11ac Wi-Fi Standard    Dual-Band / Dual-Polarity    Three-Axis Ball Joint Mount    Encased in UV-Stabilized Plastic    For Indoor or Outdoor Use

Optimized for 802.11ac, the UMA-D offers a high-efficiency directional radiation pattern with dual polarity.

Encased in UV-stabilized plastic, the UMA-D can be used indoors or outdoors.

The UMA-D has a ball-joint mount designed for precise aiming and can be mounted on a

pole or wall.

The UMA-D antenna is compatible with the UAP-AC-M.

Related Questions and Answers

Q: 1. where should this be mounted on a wall? Are there anything to consider when mounting on a wall? Any location issues? Should it be on a flat wall with no other walls near it or can it be mounted anywhere?

A: It will come down to your specific space, building materials, etc. Please reach out to us at pc@bhphotiovideo.com so we can discuss further and make recommendations.

Q: 2. Is the PoE injector included?

A: The Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point comes with the PoE injector.

Q: 3. how are the remote mesh APs powered? since they are connected wirelessly, there's no PoE. Where I need a wireless AP, theres no power, but I could use solar powered battery if there I can use an low voltage adapter to power the mesh AP.

A: A PoE adapter is included. The draw is 9w Max.

Q: 4. Does this have a dedicated mesh band?

A: No, the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point BH #UBUAPACMPRUS does not have a dedicated mesh band.

Q: 5. How do I secure the open port on the AP when mounted outside? I feel this is a way for someone to hard wire connect and access my network unauthorized.

A: You could use RJ45 locking plugs. If your worried about the physical access you might need to reconsider the AP location as it can simply be disconnected and a attacker could then have a direct wire in.

Q: 6. I would like to mount one on my back porch to provide wifi to my boat dock. The dock is about 300 feet away from the where I would mount the AP. Is this too far? It says 600 feet. I just didn't know if that was accurate.

A: Roughly 600' ft. is accurate.

Q: 7. Can I use this to replace a UAP-AC-M-US? I understand that it is larger and would perhaps have more range.

A: Yes, you can use Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point BH #UBUAPACMPRUS to replace the UAP-AC-M-US. The Pro model does have better range but it is much larger so I would keep that in mind.

Q: 8. can you attach a switch to the secondary port? I am interested in daisy chaining a few APs and then placing a small network switch at the end of the line for a few hard-wired devices.

A: Yes, you can attach a switch to the secondary port on the BH #UBUAPACMPRUS.

Q: 9. is a mount included in the box?

A: There is a wall/pole mount included with the Ubiquiti Networks UAP-AC-M-PRO-US UniFi AC Mesh Wide-Area Outdoor Dual-Band Access Point BH #UBUAPACMPRUS.

Q: 10. Will this work with the unifi legacy access points?

A: This uses 802.11ac Wi-Fi Network Standard (WIFI 5). You can use it in a network with other AP.