Bebob batteries are designed strong, reliable, and versatile. The A200 14.4V, 196Wh Gold Mount Li-Ion Battery is built to withstand falls from 4.9', yet, if it cracks for some other reason, any mechanical component is replaceable by Bebob thanks to the modular design. Similarly, when the battery capacity weakens after years of use, the batteries can be re-celled at a discount by Bebob. To help decide when to re-cell, a status alarm is built into the battery that triggers a yellow LED indicator when the capacity drops below 80% over time and a red LED when below 60%.

Another flexible aspect is the twist D-Tap. Normally you're limited to connecting a D-Tap cable only one way, the way it fits. But the A200's twist D-Tap features three pins, a positive ground pin in the center and a negative one on each side of the positive. You can plug in your cable one way or flip it around and connect it the other way. The A200 also provides a USB port for charging your mobile devices on location.

The A200 features lithium-ion trimix cells made in Japan and offers a max draw of 10A and a capacity of 196Wh. It has a 5-step LED fuel gauge and is compatible with Bebob and Anton Bauer chargers. Charging time is approximately 4 hours when using Bebob VS2/VS4 chargers.

10A Maximum Load    5-Step LED Fuel Gauge    Withstands Falls from up to 4.9'    Replaceable Mechanical Components    Re-Cell Capable (Re-Cell Status Alarm)    Twist D-Tap    USB Port    Bebob/Anton Bauer Charger Compatible

• 10A draw
• 5-step LED fuel gauge
• Withstands falls from up to 4.9'
• Modular design allows any mechanical component to be replaced
• Can be re-celled at a discount when capacity weakens after years of use (capacity status alarm LEDs built-in)
• Twist D-Tap (allows inserting cable from either side)
• USB port
• Compatible with Bebob and Anton Bauer chargers

Related Questions and Answers

Q: 1. Can these be charged through d-tap?

A: Yes, that's possible - all bebob Micro batteries can be charged through D-Tap.

Q: 2. How long does the V45 last? We're thinking of powering a Blackmagic 6K and two Nucleus-M motors with it.

A: According to Bebob, the Bebob V45MICRO 14.4V, 43Wh V-Mount Li-Ion Battery, will last a little longer than 1 hour when powering a Blackmagic 6K and 2 Nucleus-M motors, with the appropriate rig and connector for powering those devices.

Q: 3. I assume these can be charged using a Blueshape charger, even though it isn't mentioned in the compatibility list?

A: Yes, you can use a Blueshap charger to charge Bebob Vmicro batteries.

Q: 4. Can these fit any v-mount plate?

A: Yes they can. This battery should fit on any V-Mount battery plate.

Q: 5. The usb port is 9V/3A or 5v?

A: The output of the USB A receptacle on the bebob V98MICRO 14.4V, 98Wh V-Mount Li-Ion Battery (B&H# BEV98MICRO) is rated at 5VDC at 1A (i.e. 1000 mAh).

Q: 6. Can I charge a Bebob A150 Micro gold mount battery with a IndiPRO Tools Gold Mount Dual Battery Charger with XLR Output?

A: Yes, the bebob A150 Micro 14.4V 147Wh Gold Mount Li-Ion Battery can be charged with the IndiPRO Tools Gold Mount Dual Battery Charger with XLR Output.

Q: 7. Will this battery fit on the native mount of a Red V Raptor without adding a battery extension plate?

A: The bebob V150MICRO 14.4V, 147Wh V-Mount Li-Ion Battery can mount to the RED DIGITAL CINEMA V-RAPTOR 8K S35 Camera (Canon RF).

Q: 8. Can this batetry be charged via USB?

A: No, the bebob V45MICRO 14.4V, 43Wh requires a battery charger via v-mount charger. bebob 1-Channel D-Tap Quick Charger BH #BES1MICRO • MFR #S1MICRO https://bhpho.to/3C0WYVe

Q: 9. Can I charge these on Anton Bauer gold mount chargers?

A: Yes, you can charge the bebob A98 Micro Gold Mount Battery on Anton Bauer Gold Mount Chargers.

Q: 10. how long would this power an arri alexa mini?

A: The bebob A150 Micro Battery will power an ARRI ALEXA Mini for up to 3.48 hours.