Swap batteries without interrupting power with the Hot Swap Adapter for V-Mount Cameras from Bebob Factory GmbH. Featuring a male V-mount on one side and a female V-mount on the other, this adapter sandwiches between your camera's battery plate and battery. It is designed to stay attached to your camera at all times and provides up to two minutes of power whenever you swap batteries.

The adapter is equipped with an LED alarm that lets you know when the adapter takes over powering your camera and it's time for a swap. Also featuring a D-Tap port, this adapter altogether allows for uninterrupted power to the camera and one essential accessory.

Powers Camera for 2 Minutes During Swaps    V-Mount to V-Mount    Attaches Between Camera & Battery    2-Step Empty-Battery LED Alarm    D-Tap Accessory Port    15A Max Draw    14.4V    For Use with Li-Ion V-Mount Batteries

Provides two minutes of power during battery swaps

Two-step empty-battery alarm—LED flashes for 90 seconds and turns to solid for the last 30 seconds

Built-in 20Wh power buffer

12V unregulated D-Tap port with self-resetting 5A fuse

For use with V-mount lithium-ion batteries with nominal voltage between 14.4 and 14.8V

Related Questions and Answers

Q: 1. if you use this adapter can you use b mount batteries on a regular alexa mini?

A: The bebob B-Mount Battery Adapter for V-Mount Camera can be used with B-Mount batteries on a V-Mount plate paired with the ARRI ALEXA Mini.

Q: 2. Is this compatible with the Bebob A98?

A: Yes, this should be compatible with any Gold Mount style battery. The Bebob Factory GmbH A98 14.4V, 98Wh Gold Mount Li-Ion Battery should work well with this product, BH #BEA98 • MFR #A98.

Q: 3. Does the D-tap output also have hot swap capabilities? I want to power something but not with the V bracket on the mount

A: The Core SWX Micro Hot-Swap Dual V-Mount Battery Plate is designed to hot swap with batteries, and does not have another power input to provide power to the camera if both batteries are removed from the plate. Since the batteries aren’t ‘stacked’ on one another, you can easily remove the depleted battery while leaving the other battery connected so that there is no down time.

Q: 4. Can I used to power my Alexa mini?

A: Yes, the Core SWX Micro Battery Hot-Swap Shark Fin Adapter (Gold Mount) (B&H# COGPTAMICRO) could be used as part of a of a power solution for an ARRI ALEXA Mini Body with 4:3 and ARRIRAW (B&H# ARK00014797). If you are wanting to preserve the hot swap ability of this product then you would need to use it with a Gold (i.e. AB) mount battery plate and then also an appropriate power cable. For example, if your battery plate has a D-tap port then you could use the Tilta D-Tap to 8-Pin LEMO-Type Connector Cable for ALEXA Mini (B&H# TIDTP2BBCE17).

Q: 5. Will this fit two Watson VM-144-MN Mini Lithium-Ion V-Mount Batteries?

A: Yes, the Jupio ProLine Dual Hot-Swap Battery Plate (V-Mount) can accommodate two Watson Pro Mini V-Mount Battery (144 Wh).

Q: 6. Will this item work with the new Anton Bauer Digital Batteries (90, 150, 190)?

A: The QR-HOTSWAP-GM can be used with any combination of Anton/Bauer DIONIC 90, DIONIC HC, DIONIC HCX or HyTRON 50 batteries ONLY. This is due to the batteries sizes and weights. Thus the new digital series of batteries will not work.

Q: 7. Will this work with the Anton Bauer Titon SL 90's?

A: The Anton Bauer QR-HOTSWAP-GM Hot Swap Battery Adapter (B&H# ANQRHSGM) is designed to fit only smaller batteries than the Anton Bauer Titon SL 90 95Wh 14.4V Battery (Gold Mount (B&H# ANTSL90GM), The larger ones such as yours are not considered compatible in terms of normal usage. We do not recommend using them.

Q: 8. Will this accommodate full size V-mount batteries, or only mini size?

A: The Jupio ProLine Dual Hot-Swap Battery Plate is listed as compatible with V mount batteries with no stipulation as to size.

Q: 9. does this allow for battery information pass through to RED camera ?

A: It does not.

Q: 10. Will SWIT B mount batteries work with this plate?

A: Yes, SWIT B-Mount batteries are compatible with the Core SWX Hot Swap Sharkfin Adapter Plate for High-Voltage Applications (B-Mount).