This 4 x 5.65" ProGlass CINE IRND Filter from LEE Filters is an ND filter with a 2x filter factor that provides a 1-stop exposure reduction. Its 0.3 density creates a darkening of the entire image, allowing you to record or photograph with a wider aperture or slower shutter speed than normally required. By slowing your exposure time or increasing your aperture, you can control depth of field and convey movement more easily. Neutral density filters are intended to not affect the coloration of the image and are ideal for pairing with other filters.

The design of this filter has been optimized for use with digital sensors and to promote nearly flat attenuation of visible and infrared light. Due to imaging sensors' greater susceptibility to infrared light, compared to traditional film, color casts can occur when photographing darker subjects that require increased exposure times.

This 4 x 5.65" ProGlass CINE IRND 0.3 Filter is constructed from scratch-resistant, optical glass with a metallic, black rim. The glass provides increased clarity as well as color fidelity while the black rim further ensures that reflections do not occur along the filter's edge.

0.3, 0.6, 0.9, 1.2, 1.5, 1.8 & 2.1 O.D.    1-, 2-, 3-, 4-, 5-, 6- & 7-Stops    Set of 7 Solid Neutral Density Filters    Scratch-Resistant Optical Glass    Darkens Entire Frame    Neutral Results, Visible & IR Spectrums    Allows Reduced Shutter Speed    Metallic Black Rim    Includes Padded Pouch for Each Filter

4 x 5.65" neutral density filter darkens the image, allowing you to record or photograph with a longer shutter speed or wider aperture than normally required.

Providing a 1-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily.

Filter does not affect coloration of the image and is ideal for use with other filters.

Attenuates infrared light as well as visible wavelengths, to maintain color neutrality and suppress color casts due to increased exposure times.

Constructed from optical glass for clarity.

Metallic, black rim further ensures that reflections do not occur along the filter's edge.

Padded pouch included for storage and transport.

Related Questions and Answers

Q: 1. Is this compatible with the SW150 original (Mark 1) system?

A: Yes. My original shield got lost quickly. Just never wanted to stay in. This one seems a little more snug to stay without falling at the slightest bump

Q: 2. Does it comes in pairs?

A: Correct. This is a pair of replacement fasteners.

Q: 3. Will these fit in the Lee Filters Field Pouch?

A: I'm sorry no, it will just be a bit too large to use in the pouch.

Q: 4. What is the filter factor for this filter??? Is any adjustment in exposure required?

A: Lee says there is no filter factor for the Elements Circular Polarizer Filter (72mm). But this filter will block 1 stop of light at the maximum density setting.

Q: 5. 1) Can the padding be removed? 2) If so, what is interior thickness of the case without the padding? 3) Will an adapter ring fit inside the case without removing the padding? 4) Is the padding on the top and bottom? 5) Is the case hinged?

A: the padding is adhesive glued in the case , interior thickness is about 18 mm. you can put in a adapter ring up to 77 mm , yes the padding is on top and bottom ,and it is not hinged .

Q: 6. Will this fit a Nikon 24-70 2.8 lens?

A: Yes, it will fit.

Q: 7. quiero este kit, tengo un gran angular 16-35 gm, la duda es, necesito un anillo adaptador??

A: Asi es, usted necesita este adaptador: https://www.bhphotovideo.com/c/product/87148-REG/LEE_Filters_WAR082_Adapter_Ring_82mm.html

Q: 8. will it fit my 82 mm lens?

A: It fits the 150x150 mm bracket. I use it on my Nikon 14-24 lens with a special multi-piece holder that screws around the lens. It works great and the filters are not light leak proof without it. I do not think this shield works with a normal filter holder that screws to the front of a lens because it is designed to fill the gap caused by the 14-24 lens fixed front shield.

Q: 9. Does it work with the Bright Tangerine Misfit Atom Pola+ anti reflective adaptor?

A: The Revar Cine Variable ND Kit B can be used with the new Bright Tangerine 2-stage ONE Tray as well as popular Arri LMB and MB with 4x5.65 and 138mm trays.

Q: 10. I have an amaran 672s and was wondering how these would work with the light. Do they slide down between the front cover and the light itself? Do they somehow adhere? Thanks for the help.

A: The following Gels can be gaffers tapped to the frame of the Amaran 672. For a clean install we suggest the following. Impact Universal Filter Holder - 12x12" (30.5 x 30.5 cm) B&H # IMUFHQ MFR # 3312-MK2 https://bhpho.to/3kVKJ3C