The Audinate Dante AVIO 2-Channel Analog Output Adapter allows you to use the analog gear you already own with your Dante audio network. It provides audio engineers with a cost-effective solution for adapting analog power amplifiers, powered speakers, or analog compressors and equalizers, delivering the interoperability, performance, and scalability of Dante network connectivity.

Compact and built for the road, the AVIO is automatically discovered by the network and is ready to use when connected. It features two balanced, line-level outputs equipped with XLR connectors and delivers high-quality audio at up to 24-bit/96 kHz with configurable gain and attenuation, low total harmonic distortion, and a 20 Hz to 20 kHz frequency response.

The AVIO supports Dante Audio over IP and AES67 RTP transport formats, and is compatible with Dante Domain Manager (DDM).

Use Analog Gear with Dante Network    2 x XLR, Line-level Analog Outputs    Plug-and-Play Operation    Compact and Built for the Road    Audio Resolution up to 24-Bit / 96 kHz    Configurable Gain and Attenuation    Compatible with Dante Domain Manager    Dante Audio Over IP & AES67 RTP Formats

• Cost-effective solution for adapting analog gear to your Dante network
• Plug-and-play operation 
• Balanced, line-level dual-channel analog output adapter
• Compact and built for the road with sonically welded polycarbonate enclosure
• Sample rates up to 96 kHz
• Wide dynamic range
• High signal-to-noise ratio
• Low total harmonic distortion
• Configurable gain and attenuation
• Dante Audio over IP and AES67 RTP transport formats
• Power over Ethernet (PoE) support
• Compatible with Dante Domain Manager (DDM)

• Send audio to analog power amplifiers and powered speakers over a Dante audio network
• Patch DSPs, analog compressors and equalizers into a Dante system using a combination of Dante AVIO input and output adapters
• Create easy drop points for connecting overflow areas to a Dante network
• Connect non-networked hearing aid loop amplifiers to your Dante audio network

Related Questions and Answers

Q: 1. Does this AVIO support phantom power to a condenser mic?

A: This device does not support phantom power.

Q: 2. Can the input / output version of these units be used together?

A: It would be helpful to have more details about the application you would be using this for as well as what you are connecting to and from. Please email us at audio@bhphotovideo.com with the information so we can best assist you..

Q: 3. I'm looking to connect the headphone jack on my Behringer X-Air XR-18 to Dante for remote monitoring. What would I need in addition to or in place of this? Headphone port is a 1/4" TRS Stereo jack.

A: What's needed is cables and a headphone amp: 1/4" trs male to (2) XLR male(B&H # KOSMYCM2XM03 with HOGHP105 for stereo audio. , connect to the Dante XLR's, then a headphone amp at the other end, such as : B&H # PRHP2 or similar.

Q: 4. I have three, independent stereo systems in my home, and ethernet ports near each of them. Can I use this equipment so I can play the same music on each of these systems at the same time? I.e. output from one system and input to the other two systems, using each separate pre-amp/power amp (or receiver) to power each separate pair of speakers?

A: No because the Audinate Dante AVIO 2-Channel Analog Input Adapter for Dante Audio Network is only compatible with other devices that have Dante connectivity.

Q: 5. How to find this MAC address

A: The address of Dante devices such as the Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network can many times be found on the physical unit itself. Alternatively, the device and address could also be located in the Dane Controller. The article linked here provides further insight: https://bit.ly/3hr4rSI

Q: 6. Will this adapter work with analog microphones and supply phantom?

A: No, the Audinate Dante AVIO 2-Channel Analog Input Adapter for Dante Audio Network will not accept a microphone signal or supply phantom power. This adapter will integrate analog line level signals into a Dante Audio Network.

Q: 7. Will the AVIO 1 Input adapter except a 25 volt or 70 volt audio signal or does it need to be adapted to a line level first?

A: The Audinate Dante AVIO 1-Channel Analog Input Adapter for Dante Audio Network is intended for a balanced, line-level input signal.

Q: 8. Can the input version and output version of these units be used together as a standalone 2 channel dante system?

A: Yes you can, however you would need a switch as well.

Q: 9. How to find mac address

A: The address of Dante devices such as the Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network can many times be found on the physical unit itself. Alternatively, the device and address could also be located in the Dane Controller. The article linked here provides further insight: https://bit.ly/3hr4rSI

Q: 10. Can you recommend a PoE injector to use with this adapter?

A: An injector such as B&H # UBUPOEAT would be suitable to use with the Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network.