The white SW-SN-5212 Sew-In Pac from Wireless Mic Belts is designed to custom fit Sennheiser SK 5212 transmitters. It is used to conceal or camouflage your wireless mic transmitter for stage and screen purposes.

Strong, lightweight, athletic knit fabric panels can be sewn securely to any garment

Allows wireless placement in costumes without allowance for an elastic belt

Made with fabric-covered Neoprene which is durable, moisture resistant, latex-free, machine washable, and quick drying

Hook-and-loop closures secure the antenna and mic connectors in place while protecting wireless equipment from moisture

Related Questions and Answers

Q: 1. Can the Sennheiser SK 100 G4 transmit to multiple 100 g4 receiverers on the same frequency. one transmitter to 2 - receivers?

A: Yes, the Sennheiser SK 100 G4 Wireless Bodypack Transmitter can simultaneously transmit audio to multiple EW 100 G4 Series Wireless Receivers that are tuned to the same frequency.

Q: 2. Will the Sennheiser 100 4. Work with my older Sennheiser receivers? I have eg 100 and an eg 100 2. Currently having issues with both transmitters. One comes on and will not work. The other one works great while on. As soon as we turn the transmitter off, our soundsystem makes a horrible sound and I have to mute the whole system. This happened today at the end of our church service during alter call. The worse time possible for it to start popping and crackling at top volumes. It may be interference, I don’t know. But it has to be fixed. Your help would be appreciated James

A: Sennheiser's G4 series components are backwards compatible for use with the older Sennheiser G1, G2 and G3 series components. Be sure to select G4 components on the same frequency band as your older components for compatibility. Regarding the noise, you may be able to resolve the issue with popping and crackling noises when you switch off the transmitter by adjusting the squelch threshold setting on the receiver. It may be set too low or may be turned off. Squelch eliminates the noise that occurs when the transmitter is switched off and also suppresses sudden noise when the receiver is no longer receiving sufficient signal from transmitter. With the transmitter switched off, try adjusting the squelch threshold on the receiver between 5 to 20 dB (start at 5 dB first and increase it only if needed). Use the lowest possible setting that suppresses the unwanted noise. I hope this information helps! Please feel free to contact us if you have any questions or would like further assistance.

Q: 3. Is this bodypack transmitter compatible with the Sennheiser EM 6000 Receiver?

A: The Sennheiser EW-D SK Digital Wireless Bodypack Transmitter (Q1-6: 470 to 526 MHz) is only compatible with EW-D receivers. The EM 6000 is designed for the SK 6000 and SK 6212 transmitters. It is also compatible with SK 9000 bodypack and SKM 9000 handheld transmitters operating in Long Range mode.

Q: 4. on the input it says line/mic. What kind of cable is the used for line input?

A: That would be the Sennheiser CL-2 cable (B&H # SECL2 ). https://www.bhphotovideo.com/c/product/217589-REG/Sennheiser_CL2_CL_2_Transmitter_Line_Cable.html

Q: 5. Can I detach the antennas and put a half wave length antenna on my sound bag?

A: No. The antenna for the Sennheiser EW-D SK Digital Wireless Bodypack Transmitter is not swappable for an external antenna.

Q: 6. Can i broadcast to multiple receivers (one to a board, one to camera)?

A: The communication protocol of the Sennheiser SK AVX Digital Bodypack Transmitter, and other models in the AVX line, does not allow for transmission to multiple receivers.

Q: 7. Will this work with an older EW 500 G3 receiver (if they're both set to the same frequency)?

A: Yes, the Sennheiser SK 500 G4 is compatible with the G3 series as long as there is overlap in the frequency blocks and transmitter & receiver can be set to the same frequency.

Q: 8. Looks like the antenna is non removable, anyone have info on that.

A: That is correct.

Q: 9. Will the A: 516-558 body pack sync with a G: 566-608 receiver?

A: In order to sync properly, the Sennheiser SK 100 G4 Wireless Bodypack Transmitter (A: 516 to 558 MHz) must be paired with a Sennheiser receiver on the same frequency range, and more specifically, on the same exact frequency. Two wireless components on different frequency ranges will not communicate with each other whatsoever.

Q: 10. I own one but the spring in back of it broke, Can I get a replacement ??

A: BH #SE543660 is the appropriate replacement belt clip for the Sennheiser SK 100 G4 Wireless Bodypack Transmitter.