With the durable white Pearstone Cat 5e Snagless Patch Cable, you can connect your computer to a network, extending the existing network connection, or run cables throughout an office for Gigabit-speed connectivity. This cable has a length of 14', is constructed with stranded bare-copper connectors, and offers data transmission speeds that exceed Cat 5e standards.

The twisted-pair construction of this Pearstone cable helps to minimize RF or EM interference and reduces near-end crosstalk, which helps ensure your data speeds won't slow down when sharing an area with other power or communication lines. Gold-plated RJ45 connectors assure reliable connectivity and enhanced Ethernet speeds while resisting corrosion. With features like a snagless boot and a durable, high-quality PVC jacket, Pearstone's Cat 5e cable can withstand wear and tear under the most demanding conditions.

Gold-Plated RJ45 Connectors    350 MHz Rating    Compatible with Gigabit Networks    Snagless Boot    Cat 5e TIA/EIA Standards Compliant    Flexible and Durable    Reduced Near-End Crosstalk    High-Quality PVC Jacket    UL Rated

Gold plating enhances conductivity and provides enhanced data transmission speeds. Gold connectors are also noncorrosive for long cable life.

The Cat 5e cable has a 350 MHz rating to connect to a Gigabit network.

The bare copper conductors are tightly twisted to minimize RF and EM interference and near-end crosstalk that can slow down the speed of your network.

The cable's boot offers strain relief and covers the tab so you can smoothly pull the cable through a bundle without snagging.

The cable is constructed with a bare copper stranded conductor that allows you to flex the cable as needed. The high-quality PVC jacket is durable enough to withstand heavy use.

To make sure all your cables don't look alike, and so you don't use the wrong cable, Pearstone offers a wide variety of colors for easy cable identification.

Related Questions and Answers

Q: 1. Will this work with Cat6e?

A: Manufacturer states that 5e and 6 are supported. 6e is not included on their specs.

Q: 2. Can this be plugged into a network port or does the cat cable have to run directly from transmitter to receiver?

A: This product does not work across a network. The Transmitter must connect directly to the Receiver via an Ethernet cable.

Q: 3. Do you need to power BOTH the sender and receiver or is it POE with only one box needing power?

A: Yes, Both the TX and the RX Vanco HDMI Extender over Single Cat 6/5e Cable with IR Blaster would need to be powered with wall adapters which are included in the package. An alternate that would power the RX from the TX would be the MuxLab UHD-4K HDMI over HDBaseT Lite Extender Kit with PoE BH #MUHDMIEKPOEhttps://bhpho.to/3QN7gNq

Q: 4. Can I terminate (8) CAT6A to a patch panel first before the VDA? I am concerned about the weight of cables connected to the VDA

A: Yes, it would be possible to terminate the Ethernet cables before the VDA of the KanexPro 1x8 HDMI Distribution Amplifier and Cat 5e/6 Extender Kit (18 Gb/s) as long as the patches are one to one. Please note that your transmission distance may be reduced when using a patch panel.

Q: 5. If power over cable is not available, do the appropriate power supplies come with the package to power both boxes?

A: The StarTech Ultra HD 4K HDMI over Cat 5e/6 HDBaseT Extender Kit (230') only comes with one power supply; however, the kit can be powered from either side with an Ethernet cable delivering power to the corresponding side.

Q: 6. Im looking for an adapter regular female end that will have male that will fit into my Fuji camera finepix hs50exr for a microphone I hope maybe you might understand what Im asking for

A: this will work on you Fuji

Q: 7. Does this support HDMI CEC? Can I send a camera control signal from an ATEM switcher to a Blackmagic camera that's connected?

A: Vanco HDMI Extender over Single Cat 6/5e Cable with IR Blaster cannot be used for ATEM camera control because this converter is unidirectional.

Q: 8. Will the distribution amp support multiple resolutions, or will it "dumb down" all resolutions to the lowest resolution?

A: KanexPro 1x8 HDMI Distribution Amplifier and Cat 5e/6 Extender Kit (18 Gb/s) would take HD and 4k contend into the extender and send out up to 8 of the same signal over HDMI. It does not have a scaler so whatever resolution or framerate you put in would be duplicated on the 8 HDMI outputs. The kit supports resolutions UP to 4k@50/60hz 4:4:4.

Q: 9. Does this item include a power adapter for both the transmitter and receiver? And if there's only one for transmitter, can you recommend an additional, compatible power adapter for the receiver?

A: No. Only one power adapter is included in purchase. POE (Power Over Ethernet) function is supports on either TX or RX. Any POE switcher offering 24V@1A is more then enough to power up system.

Q: 10. does this device support 1080p 29.97?

A: here are the frame rates the device supports according to the manufacturer 1080p: 60 1080i: 60 720p: 60 480p: 60 480i: 60