Embrace full control over the Nissin Air System with this Air10s Wireless TTL Commander. Able to work with Fujifilm cameras with TTL support, this 2.4 GHz radio commander unit provides full wireless control and TTL communications with NAS-compatible flashes and receiver. It can also operate at distances of up to 328' over one of eight channels and with control over up to eight groups. A unique capability of this model is crossover TTL support, allowing users of Fujifilm cameras to work wirelessly, including TTL, with Nissin Air System flashes originally designed for other brands.

An advantage of this Commander is remote control over your flashes settings, including manual power output from 1/1 to 1/256, manual zoom from 24-200mm, and TTL exposure compensation. All of these settings can be seen and set via a color LCD panel. An AF assist beam is available for compatible cameras to help shooters work in low-light conditions. Also, it features a variety of sync settings, including slow, high-speed, 1st, and 2nd curtain sync as well as red-eye reduction. And, a microSD card slot can be used for firmware updates.

Nissin Air 2.4 GHz Radio TTL System    Compatible with Fujifilm TTL    Wireless TTL with NAS Flashes & Receiver    328' Range; 8 Channels & 8 Groups    Crossover TTL Control of NAS Flashes    Manual Power and Zoom Control    TTL Exposure Compensation    Color LCD Panel; AF Assist Beam    Slow, High-Speed, 1st/2nd Curtain Sync    microSD Card Slot for Firmware Updates

Nissin Air System uses a 2.4 GHz radio to transmit data up to 328' to compatible NAS flashes and receivers.

Manual controls for adjusting power from 1/1 to 1/256 and zoom from 24-200mm.

TTL flash exposure compensation can be set from ±2 EV in 1/3 EV steps.

TTL Memory Function memories exposure from TTL mode and retains this data when switched to manual mode.

Open Mode allows multiple Air10s Commanders to pair with the same group of strobes.

Crossover support allows for wireless TTL communication between a commander and strobes even if the flashes are designed for different camera systems.

Continuous shooting speed of up to 10 fps.

Control over flash's modeling light function.

Remote shutter release socket.

microSD card slot for future firmware updates.

Related Questions and Answers

Q: 1. Will it work with Hasselblad H6D 100?

A: This transmitter will not work with a H6D.

Q: 2. How do I know if the Air10 is communicating with my SONY A9? the test pilot will trigger i60a flash but won't fire when shutter release...

A: The Flash Mode in the Camera Settings 1 would need to be set for Wireless (WL) in order to use the Air 10 Transmitter properly on the Sony A9.

Q: 3. will it be absolutely compatible with nissin i40, TTL HSS?

A: Unfortunately, Nissin does not produce an Air R Receiver for the i40 with the Micro 4/3 interface at this time. That being said, this transmitter cannot trigger the flash wirelessly in TTL or HSS.

Q: 4. Does it work with Nissin i40?

A: The Nissin Air10s Wireless TTL Commander for Sony Cameras is not directly compatible for use with the Nissin i40 Compact Flash for Sony Cameras with Multi Interface Shoe. It is only designed for use with Nissin flashes that have the Nissin 2.4 GHz radio receiver built inside the flash, which are the flashes that end with the letter A indicating they are a part of Nissin's Air system (such as the Nissin Di700A and Nissin i60A flashes) or the Nissin Air R receiver. If you need to use the Nissin Air10s Wireless TTL Commander for Sony Cameras with your Nissin i40 Compact Flash for Sony Cameras with Multi Interface Shoe, you would have to purchase the Nissin Air R Receiver for Sony Flashes with Multi Interface Shoe, B&H # NINDARSNY, to connect to the bottom of the i40 flash. This would add the 2.4GHz radio to your flash for use with the Wireless TTL Commander.

Q: 5. Does this support rear sync HSS through the air r receivers on sony flashes?

A: Yes this will support rear curtain sync and HSS through the Air R receivers on a Sony flash.

Q: 6. Will this be compatible with both Nissin Di700A and i60A for MFT?

A: Yes it will once released. There are some advanced features on the new Air 10s that are designed for future flashes so some of the features will not work, but you will be able to get some additional features by using the Air 10s.

Q: 7. Does this work with existing flashes from Nissin like the Di700A?

A: Once released it will. The release date is still in question at this time. It will also have features for future Nissin flashes yet to be released.

Q: 8. can it work with Sony A7 riii camera ?

A: Yes, the Nissin Air10s Wireless TTL Commander for Sony Cameras is compatible on the Sony A7r III.

Q: 9. I have been using the Air1 for a few years. Totally let down by an inadequate display that completely disappears in daylight. Is the Air 10 any better? Anyone used it outdoors?

A: The LCD on the Air10 Commander is very bright and there has been no negative feedback on the performance of the LCD when shooting in bright conditions.

Q: 10. Nissin Air 10s wireless TTL Commander will be available in versions for different camera bodies: I own Nikon (D810) & Fuji (X-H1, X-Pro2) cameras will I need 2 camera-specific Nissin Air 10s Controllers?

A: In order to have the proper TTL communication between the flash and the camera, you would need the Air 10S Commander specific to the camera you are using.