This 62mm Double Exposure Attachment Filter from Nisha lets you capture two parallel subjects in one double exposure. It includes an aluminum alloy filter ring that can mount onto a lens with a 62mm front thread. Occupying half of the area within the filter ring is an opaque cover. The other half is completely unobstructed, allowing a camera lens placed behind this double exposure attachment to project an image where half of the frame is uncovered.

The Nisha 62mm Double Exposure Attachment Filter is effectively applied by lining up its unobstructed area and a subject to be photographed with either the left or right half—or either the bottom or top half—of the camera lens being used. The filter ring can rotate to orient the unobstructed area relative to the subject. After half a frame is exposed using a camera capable of multiple exposures within a single image, the remaining half of the frame can be exposed by rotating the filter ring to expose the previously covered half of the frame and photographing a different, or even the same, subject or scene.

Capture Parallel Subjects in One Image    Opaque Cover inside Half the Attachment    Open Area inside Half the Attachment    Separately Expose Half a Frame at a Time    Rotatable, Aluminum Alloy Filter Ring    62mm Front Filter Thread

• Helps create parallel double exposures within a single image
• Filter ring with an opaque cover occupying half its area can be rotated to expose only half of a frame, then rotated again to expose the remaining half using a different subject or scene
• 62mm front filter threads allow for use with compatible filters or filter accessories

Related Questions and Answers

Q: 1. This appears to need a magnetic base plate or something. There's no way this will stay on by itself. Was there supposed to be something in the box besides the filter itself?

A: The Freewell ND1000 Long Exposure Filter for DJI Mavic 3/Mavic 3 Cine will have a twist and lock method like previous DJI related drone filters. The current UV filter must be removed, to expose the filter groooves for a twist a lock method.

Q: 2. Is this compatible with Pentax K70?

A: The Hoya 62mm R72 Infrared Filter is compatible with the K70. As for results it will vary depending on settings and the scene/shot.

Q: 3. Will this screw onto the front of a normal lens?

A: Yes! You can use this on any lens with a 55mm front thread diameter, or on larger/smaller lenses using a step-up/step-down ring. When using a step-up/down ring, your results may vary (strength of the effect, vignetting, etc.).

Q: 4. Is it possible to use it with a canon 18-55mm ?

A: Yes but I believe the filter size of the 18-55mm is 58mm so you will need the 58mm version.

Q: 5. Does it come with the anamorphic square insert?

A: Yes. the gourmet for anamorphic also came today.

Q: 6. Key Features states that this product is compatible with Step-Up rings, but is it also compatible with Step-Down rings? Specifically, will it work with a 62-58mm Step-Down Ring?

A: No it will not. Key Features: Compatible with Moment Lenses Compatible with 62mm Filters Compatible with Step-Up Rings Add ND, UV, and Circular Polarizers

Q: 7. Is this filter compatible with the Mavic 3 classic?

A: The Freewell ND1000 Long Exposure Filter for DJI Mavic 3/Mavic 3 Cine is not compatible with the Mavic 3 Classic.

Q: 8. Will this work with a 50mm lens on a Canon AE-1 camera?

A: If your 50mm lens has a 52mm filter thread, then you can use this Nisha 52mm Split Field Filter while the lens is mounted on the AE-1.

Q: 9. Can I use these with my protective UV filter attached or do I need to remove the UV first? Do they screw on to the 82mm UV?

A: You can remove the UV firter and use the NiSi 82mm Circular Long Exposure Filter Kit. The NiSi 82mm Circular Long Exposure Filter Kit will screw into the front of the lens with 82 mm filter thread.

Q: 10. Do these screw on to the camera lense?

A: Yes it does, this is a 67mm filter.