The Hi5-12G-TR 12G-SDI to HDMI 2.0 Mini-Converter with Fiber LC Transceiver from AJA converts a 12G-SDI or fiber LC source input to an HDMI 2.0 output. This compact converter can extend a 4K fiber or 12G-SDI signal up to 6.2 miles away, and incorporates a fiber loop-out, and a re-clocked SDI loop-out. It supports video resolutions up to DCI 4K (4096 x 2160) and UHD 4K (3840 x 2160). With support for up to DCI/UHD 4K60, HFRs (high frame-rates), and HDR metadata generation, the Hi5-12G-R integrates smoothly into your professional workflow.

An LED indicator displays one of five colors when your input signal is locked: blue for 12G-SDI, purple for 6G-SDI, amber for 3G-SDI, red for HD-SDI, or green for SD-SDI. A USB port enables easy upgrades and configuration with the included Mini-Config software.

Input/output up to eight embedded audio channels via a convenient single-cable audio/video connection. The AJA Hi5-12G-TR also provides 2-channel RCA-style audio outputs for separate audio monitoring. This converter includes a universal power supply with international plug connectors for worldwide use.

1 x 12G-HD/SD-SDI Input    1 x 12G-SDI Fiber LC Transceiver    1 x HDMI 2.0 Output    Fiber Loop-Out, Re-Clocked SDI Loop-Out    Outputs Up to UHD 4K60 at 18 Gb/s    Two Sample Interleave (2SI) 4K/UHD    HDR Support with HDR10 & HLG    8-Ch Embedded Audio Input/Output    2 x RCA (R/L) Analog Audio Output    100-240 VAC Adapter, USB FW-Update Port

• Converts a 12G-SDI input or fiber source to an HDMI 2.0 output
• Supports HDMI 2.0b to 18 Gb/s for UHD 4K 60/59.94/50 4:2:2/4:4:4
• Supports video resolutions up to DCI 4K (4096 x 2160) and UHD 4K (3840 x 2160)
• Incorporates a fiber loop-out, and a re-clocked SDI loop-out
• Extends 4K signals up to 6.2 miles
• HDR support with HDR10 and HLG (hybrid log gamma)
• An LED signal-lock display indicates your input source-type with one of five colors
• Input/output up to eight embedded-audio channels
• Additional 2-channel RCA analog audio output
• Configure and update via the USB port and the included Mini-Config software
• Universal power supply with international plug connector set
• Compact and portable form

Related Questions and Answers

Q: 1. Does this device support 23.98psf?

A: This supports outputs up to UHD 4K60. It should work well for 24fps.

Q: 2. I shoot in 4K and edit in HD. Can T-Tap Pro take a 4K signal and downconvert to HD for playback?

A: The AJA T-TAP Pro does not have built in downconverters. However, depending on the editing software, like Premiere Pro. You can have UHD/4K sequence and have the playback setting “match control panel” in Premiere Pro preferences with the T-tap Pro format set to HD/2K to playout.

Q: 3. Does it have built in scaler?

A: The unit handles many resolutions and frame rates, but it's designed to convert the HDMI signal to the 12G-SDI (there will be no scaling involved -- it passes thru the exact same video stream that was sent in on the HDMI input). What it does well is, it acts as a distribution amplifier, giving you two identical signals that can go out via 12G-SDI, but no scaling is necessary for this purpose.

Q: 4. Can this run off a battery?

A: Yes. Comes with an AC to 12V DC power supply so you can run on 12V DC if you do not have reason to use any other voltage within the specified 6-36V DC. Just be careful not to mix the polarity, I am not sure its reverse polarity protected.

Q: 5. Can it output from Macs that don't have support for external HDR displays?

A: The AJA T-TAP Pro Thunderbolt 3-Powered Converter with 12G-SDI and HDMI 2.0 Output would support the following applications and allow you to output to HDR displays. See software compatibility. https://bit.ly/3GFz7dP

Q: 6. Can I feed audio from the headphone jack to my receiver for my monitor speakers?

A: Yes, it is possible to take the 3.5mm TRS stereo output from the AJA T-TAP Pro Thunderbolt 3-Powered Converter with 12G-SDI and HDMI 2.0 Output and plug it into speaker monitors using appropriate adaption.

Q: 7. Are the output ports mirrored or can I send different output content to them independently?

A: Both outputs can be used simultaneously at all times, and the HDMI output can be connected directly into 4K HDMI monitors for monitoring HDR video in PQ, HLG, HDR10, and Dolby Vision formats with third-party support.

Q: 8. Will this accept TP-Link TL-SM5310-T 10G SFP+ to RJ45 Adapter Module?

A: No, the SFP+ to RJ45 adapter modules are not compatible with the Blackmagic Design Mini Converter Optical Fiber 12G-SDI.

Q: 9. Can this output different formats between the two outputs?

A: No it can not. The SDI and the HDMI outputs must be the same resolution.

Q: 10. Can this T-Tap cross convert so the different outputs are send out different formats?

A: no it can not.