Futureproof your network for ever-increasing Ethernet speeds with the blue Cat 6a Snagless Patch Cable from Pearstone, as it comes rated to 550 MHz and is capable of transmission speeds up to 10 Gb/s. The durable and heavily jacketed cable has a length of 100', is suited for commercial use, and meets or exceeds all Cat 6a standards, making it a viable solution to wire a home, office, or entire building.

Due to the greater transmission speeds, the Cat 6a cable is a step up from Cat 5 cables in reducing the crosstalk and interference that can slow the speed of your network. To further minimize crosstalk, the Cat 6a cable is constructed with an internal nylon spline that separates and isolates the four twisted pairs. Gold-plated RJ45 connectors assure reliable conductivity and enhanced Ethernet speeds while resisting corrosion. The snagless boot design will withstand wear and tear under the most demanding conditions.

Gold-Plated RJ45 Connectors    550 MHz Rating    For 10-Gigabit Networks    Snagless Boot    Cat 6a 568B 2.1 Draft 9 Standards    Flexible and Durable    Reduced Near-End Crosstalk (NEXT)    PVC Jacket    Various Colors for Easy Identification    UL Rated

Gold plating enhances conductivity and assures fast data transmission speeds. Gold Connectors are also noncorrosive for long cable life.

The Cat 6a cable is capable of 10 Gb/s data transfer rates and has a 550 MHz rating which is perfect for connecting to 10-Gigabit networks. Upgrading to a Cat 6a patch cable will help to futureproof your network for increasing transmission speeds.

The bare copper conductors are tightly twisted to minimize RF and EM interference and near-end crosstalk that can slow down the speed of your network. For additional rejection fo unwanted interference, the cable is constructed with an internal nylon spline that separates and isolates the four twisted pairs. This feature offers additional network speed for data-intensive applications like streaming video.

A cable's release tab is something you never think about until it catches on something, or if it breaks. The cable's boot offers strain relief and covers the tab, so you can smoothly pull the cable through a bundle without snagging.

Flexibility and durability are important when selecting patch cables because you need them to flex, bend, and withstand frequent connecting and disconnecting. This cable is constructed with a bare copper stranded conductor that allows you to flex the cable as needed. The PVC jacket is durable enough to withstand heavy use.

To make sure all your cables don't look alike, and so you don't use the wrong cable, Pearstone offers a wide variety of colors for easy cable identification.

Related Questions and Answers

Q: 1. Can this be used to connect a Tamron 35-150mm to a Mac?

A: The Tamron TAP-In Console is needed in order to utilize this Pearstone USB cable to update the firmware on the Tamron 35-150mm from a Mac.

Q: 2. Will 4 pin fit into dvi port on Sony handycam dvr350?

A: No, the Firewire 4 pin port would not fit into a dvi port. But the Sony handycam TRV350 would not have a DVI port, it would have the Firewire port So this would work with this camera.

Q: 3. Are these compatible with all Neutrik Ethercon shells?

A: The Neutrik etherCON Cat 6a Feedthrough Coupler mates to all etherCON Cat 6 (NE8MX*) and etherCON Cat 6A (NE8MX6*) cable connectors and cable connector carriers. The Neutrik etherCON Cat 6a Feedthrough Coupler does not mate to etherCON Cat 6 (NE8MC6-MO and NKE6S-* cable assemblies).

Q: 4. Wii this work with the USB C connection on the iPhone 15?

A: The Pearstone USB-C 3.1 to USB-A Charge & Sync Cable has a USB-C connector which is compatible with all USB-C devices. Whether the setup you are attempting will work will depend on the device you are hoping to connect.

Q: 5. Will this work for Canon ZR45MC? Thank you.

A: Yes, the Pearstone FireWire 400 4-Pin to 6-Pin Cable - 3' (0.9 m) BH #PECFW463 is compatible with a Canon ZR45MC.

Q: 6. Do i actually need this to build a computer?

A: You do not NEED it, but it is helpful to have just in case there would be anything that can cause static around you.

Q: 7. Can this USB-A to USB-C cable be used to charge an 11" iPad pro, which has a USB-C port? I know it will be slow, but will it work?

A: The cable supports up to 3 Amp charging.

Q: 8. Just to confirm...this will transfer files from an external HD (USB-C) to a PC (USB-A)?

A: Yes. The Pearstone USB-C 3.1 to USB-A Charge & Sync Cable (3') can be used for data transfer

Q: 9. Are these shielded against RF interference?

A: These are not ballanced cables and can be susceptibe to RF issues.

Q: 10. What should the alligator clip be attached to ?

A: The crocodile clip securely attaches to your PC's frame or other metal surface. It creates a ground to ensure that a static electrical charge won't damage the components you're working with.