Ideal for high-density server and data center environments, this 2.5' long RJ45 Male to RJ45 Male Slim Cat 6 Patch Cable from C2G features 28 AWG conductors for a small diameter. The slim size and small bend radius allow you to more easily route cable through smaller spaces while still enjoying improved airflow. Snagless RJ45 connectors help to reduce frustration, wasted time, and connector strain when running cable.

2.5' in Length    Slim Size for High-Density Cable Runs    28 AWG Gauge with Snagless Connectors    Up to 10 Gb/s Transfer Speeds    Meets ANSI/TIA-568-C.2 Standard    Copper Material to Minimize NEXT Levels

Supporting the Cat 6 standard, this cable is well suited for bandwidth-intensive applications, such as voice, data, or video. It provides support for throughput speeds of up to 10 Gb/s.

Due to the 28 AWB size, signal attenuation is increased to limit the distance of installations. There are also bundle limits based on heat dissipation.

315' / 96 m channel: up to 19.7' of slim cable with 295.3' of horizontal cable
305' / 93 m channel: up to 32.8' of slim cable with 272.3' of horizontal cable
POE/POE+: bundle limit of 40 cables due to heat dissipation

Meets the ANSI/TIA-568-C.2 standard
Copper construction to minimize NEXT (Near-End Crosstalk) levels

Related Questions and Answers

Q: 1. I understand this is designed for a LANC extension cable, but wondering if the TRS connector is wired straight through from male to female end (i.e. pin 1 pin 1, pin 2 pin 2, pin 3 pin 3)?

A: Unfortunately, We do not have any info about how this cable is wired. You may want to reach out to Smallrig at smallrig@smallrig.com

Q: 2. will it work with core edge v mount battery?

A: This is not compatible with that battery.

Q: 3. Tilta TA-BTP-F970 NP-F970 Battery Plate

A: It is compatible.

Q: 4. Could this power a BMPCC 6K G2 from a SmallRig V-Mount adapter plate (#SM3203B)?

A: As the Tilta 2.5mm DC Male Barrel Power Cable for BMPCC 4K (17.2") is a 2.5mm sized barrel which matches the 12V barrel size on the SmallRig V-Mount Battery Adapter Plate with Dual 15mm Rod Clamp, BH #SM3203B, it should be compatible.

Q: 5. Will this work with the Dji RS2?

A: The DJI RS2 does not have a 2-pin LEMO port, nor a DC port.

Q: 6. Will this work with a Tilta Cage?

A: Yes, the SmallRig Ultra-Slim Female HDMI Type A to Male Micro-HDMI Type D Adapter Cable will work on any cage including those from Tilta that have the matching mounting configuration.

Q: 7. will this handle prores raw into ninja v?

A: For a RAW signal we highly recommend a direct connection. We are not aware of this being able to pass a RAW signal.

Q: 8. Can I use this to connect an Atomos AtomX Sony L-Series Type Battery Eliminator on an Atomos Ninja V to a V mount setup?

A: No, barrel will not fit its a 5.5/2.5 mm dc cable.

Q: 9. Can I connect it to a power bank with a 12V 2.5mm barrel output?

A: This cable is designed specifically to work Tilta Battery plates that have the needed 2.5mm barrel output such as BH #TIBT003A. We are not aware of how well it might work with non-Tilta products. https://bhpho.to/2Qpm75i

Q: 10. Will this work with Tilta's side power handles?

A: The Tilta 2.5mm DC Male Barrel Power Cable will not work with the Tilta Side Power Handles as it does not have an barrel port for powering, only USB for the Nucleus motors.