The tan SW-LC-SMQV Sew-In Pac from Wireless Mic Belts is designed to custom fit Lectrosonics SMQV and Shure UR1M transmitters. It is used to conceal or camouflage your wireless mic transmitter for stage and screen purposes.

Strong, lightweight, athletic knit fabric panels can be sewn securely to any garment

Allows wireless placement in costumes without allowance for an elastic belt

Made with fabric-covered Neoprene which is durable, moisture resistant, latex-free, machine washable, and quick drying

Hook-and-loop closures secure the antenna and mic connectors in place while protecting wireless equipment from moisture

Related Questions and Answers

Q: 1. What is the effective range of the LMB B1 Transmitter? By range I mean distance between transmitter and receiver not frequency range.

A: The operating distance for the Lectrosonics LMb Bodypack Wireless Transmitter and a compatible wireless receiver is approximately 328 feet line of sight.

Q: 2. Is there a battery eliminator made for this?

A: No,at this time there are no battery eliminators or alternate powering options available for the LMb transmitter.

Q: 3. I have a lot of Sennheiser lavs with a 3.5mm connector. Is there an adapter that will connect my Sennheiser mics to the 3 pin lemo of this receiver?

A: Unfortunately there would be no adapters available to connect a lavalier wired with a Sennheiser mini jack to connect with a Lectrosonics transmitter.

Q: 4. Can it be paired with a Samson airline micro wireless ear set.

A: No, the AirLine works in a completely different frequency range. With this receiver you would use the PXD1 bodypack transmitter with a headset mic.

Q: 5. Can you use this with a SRa receiver

A: So long as your SRa receiver has the same frequency ranges as the LMb transmitter, the LMb transmitter will work with an SRa receiver.

Q: 6. Could these, along with the DCHR, be used as another set of talent wireless sets to be plugged into a mixer/recorder?

A: The Lectrosonics DCHT Wireless Digital Camera Hop Transmitter can be used together with the Lectrosonics DCHR Camera-Mount Miniature Digital Camera Hop Wireless Receiver as a wireless IFB system to send audio from a mixer/recorder.

Q: 7. Does this unit only provide limited frequency spectrum (15 Hz to 11.3 kHz)? I would like to use this as a compact IEM wireless solution but am concerned I wouldn't be able to hear my mix with fidelity after investing so much in this kit. I almost ordered this before catching the limited spec as there are no other body pack-sized (transmitter) solutions on the pro market for wireless IEM. Does anyone have any other recommendations?

A: The DCHT, like the M2T rack unit, provides 20 - 12 kHz audio frequency response with the M2R receiver. Although on paper that appears quite limited, the impression upon listening to it is that everything is there. By far most of the energy in a mix is between 50 Hz and 10 kHz, with harmonics extending above that. I would suggest giving it a listen and decide for yourself. If you have already used the M2T and M2R combination, then you are hearing the same thing you would hear with the DCHT and M2R.

Q: 8. I need help to pair Samson RXD2 wireless USB receiver with my XPD1 wireless handheld Mic. ?

A: Press and hold the Pair button on the receiver for more than 5 seconds and it will begin to flash. Then press and hold the Power Button on the transmitter until the LED indicators on both units light steady (no flash). Your transmitter and receiver are now paired. https://www.bhphotovideo.com/lit_files/522198.pdf

Q: 9. Is it posible to use this Lectrosonic transmitter with a Sennheiser receiver in the same band (A1)?

A: No that would not be possible.

Q: 10. Am I able to use the lectrosonics IFB to tune into this transmitter? I didn't see an IFB mode.. just DHCT and DUET mode.

A: This unit is not compatible with the IFB model receivers. For an IFB receiver, you'd need a version of their IFBT4 transmitters in the corresponding frequency as the receiver. Such as this B&H # LEIFBT421.