The white SW-SN-6000 Sew-In Pac from Wireless Mic Belts is designed to custom fit Sennheiser SK 6000 transmitters. It is used to conceal or camouflage your wireless mic transmitter for stage and screen purposes.

Strong, lightweight, athletic knit fabric panels can be sewn securely to any garment

Allows wireless placement in costumes without allowance for an elastic belt

Made with fabric-covered Neoprene which is durable, moisture resistant, latex-free, machine washable, and quick drying

Hook-and-loop closures secure the antenna and mic connectors in place while protecting wireless equipment from moisture

Related Questions and Answers

Q: 1. what accu batteries can I use for Sennheiser SK 100 G4 transmitter ?

A: The below are compatible: https://www.bhphotovideo.com/c/product/324393-REG/Sennheiser_BA2015G2_BA_2015G2_Rechargeable_Battery.html https://www.bhphotovideo.com/c/product/324394-REG/Sennheiser_L2015G2_Charging_Station.html Power Requirements Battery Battery Type 2 x AA (Included) 1 x Sennheiser Accupack (Not Included, Replaceable)

Q: 2. Will the Sennheiser 100 4. Work with my older Sennheiser receivers? I have eg 100 and an eg 100 2. Currently having issues with both transmitters. One comes on and will not work. The other one works great while on. As soon as we turn the transmitter off, our soundsystem makes a horrible sound and I have to mute the whole system. This happened today at the end of our church service during alter call. The worse time possible for it to start popping and crackling at top volumes. It may be interference, I don’t know. But it has to be fixed. Your help would be appreciated James

A: Sennheiser's G4 series components are backwards compatible for use with the older Sennheiser G1, G2 and G3 series components. Be sure to select G4 components on the same frequency band as your older components for compatibility. Regarding the noise, you may be able to resolve the issue with popping and crackling noises when you switch off the transmitter by adjusting the squelch threshold setting on the receiver. It may be set too low or may be turned off. Squelch eliminates the noise that occurs when the transmitter is switched off and also suppresses sudden noise when the receiver is no longer receiving sufficient signal from transmitter. With the transmitter switched off, try adjusting the squelch threshold on the receiver between 5 to 20 dB (start at 5 dB first and increase it only if needed). Use the lowest possible setting that suppresses the unwanted noise. I hope this information helps! Please feel free to contact us if you have any questions or would like further assistance.

Q: 3. What kind of headset microphones are recommended?

A: There are many available headset microphone options compatible with the Sennheiser EW-D SK Digital Wireless Bodypack Transmitter. A compatible option will have a locking, Sennheiser-wired 3.5mm connection. Headset models from Countryman, DPA, as well as Sennheiser's own headsets are some of the top choices. Application dependent specifications such as cardioid or omnidirectional pickup pattern and color options should also be considered. This search link filters compatible options in this category: https://bhpho.to/351vHVr

Q: 4. Can i broadcast to multiple receivers (one to a board, one to camera)?

A: The communication protocol of the Sennheiser SK AVX Digital Bodypack Transmitter, and other models in the AVX line, does not allow for transmission to multiple receivers.

Q: 5. I'm looking for a belt clip for Sennheiser SK100 ?

A: BH #SE543660 is the replacement belt clip for the Sennheiser SK 100 G4 Wireless Bodypack Transmitter.

Q: 6. Can I use one receiver for several AVX transmiters? Or do I need an audio mixer?

A: This is one transmitter to one receiver.

Q: 7. Hi there. Will this unit supply 48 V phantom power to a shotgun mic? Cheers

A: Hi Marc - the SK 100 G4 bodypack transmitter doesn’t supply 48V phantom power, however, the SKP 500 G4 plug-on transmitter does. If you’re working with a shotgun microphone that can be powered via battery or phantom powers - such as the MKE 600 - you could also use the SKP 100 G4 plug-on transmitter as a more cost effective solution. Alternately, a CM 1 XLR Female to 3.5mm locking connector adapter cable can also be used with the MKE 600 to connect it to a bodypack transmitter. For +48V phantom power, you’ll want to be looking at the 500 Series (EW 500 G4 BOOM, EW 500 G4 FILM or SKP 500 G4).

Q: 8. Will this work with the Sennheiser EK 100 G4 Camera-Mount Wireless Receiver? Or is it only compatible with the EM 100?

A: Yes, the Sennheiser SK 100 G4 Wireless Bodypack Transmitter (A1: 470 to 516 MHz) would work with the Sennheiser EK 100 G4 Camera-Mount Wireless Receiver. Just make sure that the frequency range of the transmitter matches that of the receiver.

Q: 9. Can the Sennheiser SK 100 G4 transmit to multiple 100 g4 receiverers on the same frequency. one transmitter to 2 - receivers?

A: Yes, the Sennheiser SK 100 G4 Wireless Bodypack Transmitter can simultaneously transmit audio to multiple EW 100 G4 Series Wireless Receivers that are tuned to the same frequency.

Q: 10. How to get line-level into the AVX? When I use the CL440 or CL2 cable it is mic-level and so very distorted.

A: What you will have to do is. Go into the menu on the transmitter to Sensitivity. It will probably be set -6dB drop it down till about -12dB and see if that does it. Either way you have to reduce the sensitivity and then compensate from the receiver by bringing up the AF out. AF out will be the output level to the camera.