The brown, 110mm d:fine Core 4266 Omnidirectional Miniature Mic Boom from DPA is a replacement microphone boom for the d:fine headset (sold separately). Designed for theater and broadcast applications, the Core 4266 amplifier technology delivers a 14 dB increase in both THD (total harmonic distortion) and dynamic range than the Legacy 4266 model. This miniature mic boom requires an optional cable and headset.

Replacement Mic Boom for d:fine Headsets    Omnidirectional Polar Pattern    For Stage and Television    Core Amplifier Increases Performance    14 dB Increase in THD and Dynamic Range    20 Hz to 20 kHz Frequency Range    Requires Cable and Headset

Pristine audio quality

Lightweight and flexible

Minimal visual impact

Resistant to humidity

Flexible adapter system fits most professional wireless systems

Related Questions and Answers

Q: 1. Would this work with Rode VideoMic NTG Hybrid Analog/USB Camera-Mount Shotgun Microphone, or will it want to jump to the sky?

A: Yes it will.

Q: 2. Can you flip one of the screws so that one screws "up" and the other screws "down" or are they both locked in that position?

A: Yes, the threaded bushings on the bottom of the Gator Frameworks Mic Mount Bar can be removed with a flathead screwdriver so you can position the screws as needed.

Q: 3. What do you use to connect this Sony ECM-77B Lavalier Mic to Sony AX 100 ?

A: The Sony ECM-77B is a battery or phantom powered lav. You would use an XLR to 3.5mm adapter cable to plug it into a Sony AX 100. You can find this cable on the B&H website part number B&H # KOXRSM06.

Q: 4. why does the arm want to spring to the ceiling, is my mic not heavy enough?

A: That generatlly happens if the mic is not heavy enough.

Q: 5. How many windscreens are included in one package?

A: The Earthworks OMW3 Windscreen for Earthworks Omnidirectional Microphones contains one Earthworks OMW3 Windscreen.

Q: 6. How much weight can this boom arm support?

A: The specific weight supporting capabilities of the CAD PodMaster Boom Arm / Mic Mount are not specified by the manufacturer. As the unit is designed to accommodate microphones, it would not be advisable to load this arm with more than a few pounds.

Q: 7. Will it work with rode nt-usb mini?

A: Yes. This arm witll hold the NT-USB Mini.

Q: 8. In different sources specs are different: one claims that this arm holds 700-100 gramm of weight, other – up to 2.2 kg. Who is right?

A: According to Rode, the PSA1 can support most microphones weighing between 700 g (1.5 lb) and 1.1 kg (2.4 lb) when combined with a shock mount. Just to avoid any confusion, 1.1 kg is the same as 1100 g.

Q: 9. Does it work with AT2020USB+?

A: Yes, fully compatible.

Q: 10. How wide is the rectangular mount? Top to bottom when looking at it horizontally! Looking to purchase for a different Z stand...

A: Thank you for your email. At this time the manufacturer has not made that specification available as it is meant to be mounted to either side of any QuikLok Z stand except for the Z-722 or Z-722L