The Tiffen 5 x 6" 5 Cyan Soft-Edge Graduated Filter helps to specifically add a bright cyan coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 5 color density provides more cyan coloration than the 4 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 5 x 6" / 127 x 152.4mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

5 Density Color Graduated Filter    Cyan Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a bright cyan coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. does this item comes with single bracket or pair ?

A: This item comes as a single bracket.

Q: 2. How many pictures (or what is the area) we can we print with one ink cartridge ?

A: There is no real way to tell this, as the manufacturer is not listing any information on how many prints you can get. This is something that can change based off what you are printing and how often.

Q: 3. what is the cartridge capacity on these?

A: The cyan 200 is a standard capacity cartridge. Epson provides some specifications on cartridge performance at their website, cartridgeinfo. How long they last and how many prints you can get depends on what type of printing you are doing. If you are printing 8.5 x 11 full color photo quality photo prints, where the entire paper surface is printed, the cartridge might need replacement after only 10 or 15 photos. If you print only Word docs or web pages on a draft setting, the cartridge will last for probably 80 pages at least. If you print very seldom, you will not get as many prints because the heads will need cleaning and that uses ink. Hope this helps.

Q: 4. Does both end parts of the column post come off?

A: Yes. The hook screws completely off as well as the other end. That bolt can be reverse for smaller thread size.

Q: 5. What is the approximate number of feet that this will print? (Assuming light imagery and mostly large text)

A: Depends if the rip processes your file and determines it needs Photo black. Almost impossible to answer. However you can run a test print to see the exact ink used per foot in the web interface/webtools to the printer.

Q: 6. what are the cartridge's page yields?

A: Cartridge yields vary considerably for reasons including images printed, print settings, temperature and humidity. Yields may be lower when printing infrequently or predominantly with one ink color. A variable amount of ink remains in the cartridge after the replace cartridge signal. Part of the ink from the first cartridges is used for priming the printer. Ink is used for both printing and print head maintenance.

Q: 7. How many ml capacity in XL tank vs regular tank?

A: The Xl is 10.8ml vs the regular at 6.5ml.

Q: 8. How do you mount this to a base with 3/8 -16 screw?

A: The SmallRig Video Head for Horizontal or Vertical Shooting uses a 3/8"-16 mounting thread receiver built into it's base to mount to flat base tripods' 3/8"-16 screw, so in essence, the head should screw down onto the screw without issue.

Q: 9. How many 8 X 11 copies can be from a cartridge?

A: On the Epson P800 you can do 500 8x10 glossy/luster/semi-gloss/satin prints on an 80 ml set of ink. This Epson P600 printer has a 25.9ml capacity, so it is 3 times smaller AND it is a light color so they run out more quickly. So on the same surface finish I would say anywhere from 100-120 prints 8x10 photo prints if you run them consecutively. If you shut the machine on and off and leave it off for weeks or a month or two at a time, then definitely less than that.

Q: 10. is this solvent ink?

A: This is pigment based ink.