The Rosco RoscoLED 150W Power Supply is designed to power RoscoLED variable PWM DMX decoders for LED Tape. The unit transforms an input voltage ranging from 90 to 305 VAC down to a 24 VDC output voltage at 6.3A.

Powers RoscoLED DMX Decoders    90 to 305 VAC Input Voltage    24 VDC Output Voltage    150W Rated Power    IP Rating: IP67

Related Questions and Answers

Q: 1. Is there a version that works with 220 power?

A: You can use this version with 220v power https://bhpho.to/2LGyiZq.

Q: 2. When using this with the Sennheiser DC 2 - DC Camera Power Converter, how do you tell or know that are the negative(-) and positive (+) when soldering?

A: I put a multi meter to be absolutely sure of the polarity. But anyway you will find that the wire that is black with lettering from the power supply will get soldiered to the black with white stripe wire on the fake battery pack. The black with a white strip will be your positive. Your solid black wire will be your negative on both.

Q: 3. power unit for the I cue by Roscoe?

A: The correct power supply for this unit is the Rosco PSU50 Power Supply - 50 Watts (100, 120, 240V AC), B&H # ROPSU50. Please see the following image below for reference.

Q: 4. Does this light kit include the light stands or are they a separate item?

A: The kit BH #IKSFB1502PTK • MFR #SFB150-2PT-KIT does include the stands.

Q: 5. I'm curious, what is the purpose the bulb is not included?

A: Most tungsten fixtures such as this one do not include a bulb when the fixture is purchased on its own. The correct bulb to use for this fixture is Dedolight DL150 Lamp (150W/24V) B&H # DEDL150.

Q: 6. What camera cable do I need to connect this to the Arri Alexa LF?

A: Power supplies are connected with a cable (for example KC-20 or KC-29) to the ALEXA LF BAT connector. We recommend using the ARRI Power Supply Light 24V (K2.0034493) or the Power Supply NG 12/26 R (K2.47351.0) to power the ALEXA LF. However, the Power Supply NG 12/26 R is not available for sale anymore, due to discontinued parts of the supplier. Please note, that the AMIRA and ALEXA Power Supply Light (K2.0006876) is not suitable to power the ALEXA LF. While it works fine in low power demanding situations, it may not work in high power demanding settings. Do not use this power supply with the ALEXA LF.

Q: 7. Would this also work for a Panasonic Varicam?

A: Yes. The following unit will power both will power both varicam and Ursa units.

Q: 8. Will this work for the BM television studio pro ATEM?

A: Yes, the following adapter will work.

Q: 9. According to the manufacturer site, this head is compatible with the DP1, DP2, and DP3 projectors. All those projectors come with and without lenses. What's the difference between the projectors? And what's the difference with and without the lenses? My goal is to project a gobo image onto a wall or person.

A: The DP3 https://bhpho.to/2vzDd4x would be the best choice for use with a 150w tungsten light. It has a fan built in to allow for long run times. The DP2 does not allow for Gobos or attachments. The DP1 would also work but does not have the cooling fan. The lens is what allows for focus and control of the light beam.

Q: 10. What is a typical application for this amplifier? Is it normally used as an audio amplifier?

A: The Bogen V150 is a mono mixer/amplifier generally used in commercial installations such as retail/office applications. It can support up to 8 input sources of various types using optional input modules and outputs to 70 volt speaker systems as well as low impedance 4 or 8 ohm applications.