The 12" Rosco RoscoLED Tape 12V VariWhite Strip with Barrel Connector provides filmmakers and set designers with a versatile solution for incorporating large amounts of high-quality, variable-white LED light in confined areas such as cars, plane interiors, and more. It has an IP67 rating for repeated outdoor use.

The strip features three LEDs per 1", which generate a clean and bright light with 93 CRI, 92 TLCI, and color temperature ranging from 3000 to 5600K. It comes pre-configured with a 0.08" / 2.1mm DC barrel connector designed to quickly plug into RoscoLED 12 VDC power and dimming accessories (available separately).

High-Output White LED Strip    3000 to 5600K Variable Color Temperature    12 VDC Operation    3 x LEDs per 1", 1500 lumens per 3.2'    CRI: 93, TLCI: 92    IP67 Rating for Outdoor Installations    Robust 3 oz Copper Heat Sink    Plug-and-Play Connectivity    Length: 12"

• High-output LED white light with 93 CRI and 92 TLCI
• 3000 to 5600K variable color temperature
• Mixes with other non-LED light sources for seamless project integration, without additional filtration or modification of the LEDs

• Three LEDs per 1", for clean and bright variable white light
• Produces 1500 lumens per 3.2'

• Strip comes pre-configured with a 0.08" / 2.1mm DC barrel connector
• Designed to quickly plug into RoscoLED 12 VDC power and dimming accessories (available separately)

• Strip features a robust 3 oz copper heat sink
• Integrated copper enables efficient thermal management of the LED emitters, allowing them to run cooler and extend their lifespan
• Thick copper base minimizes potential for damage to the electronic circuits during handling and installation
• Rated IP67 with silicone coating for indoor and outdoor installations

Related Questions and Answers

Q: 1. is this compatible with the BGH1 camera?

A: As long as the DC barrel cable connector fits into the camera, then it will work.

Q: 2. Was wondering if this cable is also compatible with the Sony PXW-Z280 camera?

A: Yes, The Anton/Bauer P-Tap to Sony 12V Barrel Cable (20") would also support the Sony PXWZ280 camera as well.

Q: 3. Hi, can this be used to power up Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor?

A: No, The Anton Bauer P-Tap to Sony 12V Barrel Cable (20") will not work with the Video Assist 12G. Please use a dummy battery solution like the following. https://bhpho.to/3Hfs5vG

Q: 4. For use with continuous lighting, would it be okay with th aputure 300dii?

A: Hi Michael, Yes, this softbox can be used with LED lights.

Q: 5. What's the difference between bulk packaging and retail packaging?

A: I did take a look at both versions of this. The "Bulk" scribble strip console tape is exactly the same but packaged in only a clear bag. The other has plastic packaging that allows a reseller to hang on a hook in the store and the manufacturer branding on it.

Q: 6. What is the size of the DC barrel? And what is the polarity, which one is positive and negative?

A: The The Bescor AC25 has a 2.5mm Barrel Plug. Bescor does not indicate polarity info.

Q: 7. Does the shoe-mount bracket allow enough adjustment that a radio receiver could be mounted beneath a speedlight and still fit into the opening?

A: The short answer is Yes. I use a Phottix Mitros flash with a Phottix Odin receiver AND a Sony ADP AMA shoe to multi adapter in between the two. The sliding adjustment plate/track is all the way out when I use this set up, but it works.

Q: 8. what's the difference between bulk and retail packaging?

A: Bulk packaging of Hosa Technology Scribble Strip Console Tape (0.75" x 60 yd, White is used to transport products to a retail location; retail packaging is designed to protect and present the product in the most appealing way, to catch the customer's eye.

Q: 9. Can this power an insta360 pro 2 camera when connected to a PAG pl92 battery?

A: There should be no issue as long as the 12V version is being used.

Q: 10. Will this fit FJ400?

A: The softbox will work with the FJ400, the box mounts using the umbrella mount.