Securely tether your smartphone or tablet to a solid object with the Universal Tablet Lock Adhesive Security Plate from Maclocks. This low-profile security plate features an industrial-strength 3M VHB adhesive backing, and it's designed to fit a variety of smartphones, tablets, and other mobile devices. The plate attaches to a 6' galvanized steel cable lock. A loop at the end of the cable is ideal for securing your tethered device to a suitable object. Two keys are included.

Low-Profile Universal Security Plate    Designed for Smartphones & Tablets    3M VHB Industrial Adhesive    6' Galvanized Steel Cable Lock    Loop-Ended Cable    2 x Keys Included

This set includes an industrial-strength adhesive plate with a built-in standard security slot, a peripheral cable trap, and a 6' galvanized steel cable lock.

Once the adhesive bond is formed (the recommended set time is 10 hours), the plate will essentially be permanently attached. You can tether the lock to almost any solid object via the loop end of the cable.

Related Questions and Answers

Q: 1. My tablet is a Samsung Galaxy Note Pro 12.2 . Will that extra .2 prevent it from fitting properly on tablet platform?

A: The PT-ELITE-UL supports tablets up to 9 x 12 in. The Galaxy Note Pro 12.2s dimensions are 11.64 x 8.03 so it is within the dimensions and should fit no problem. This because the screen size is measured diagonally, which is of course longer than the length and width.

Q: 2. Can the clamp be turned 90 degrees from the picture shown so that the camera slides in from the side instead of back to front? Reason I'm asking is I have a Tether block quick release plate on my camera that goes the length of the camera. Thanks

A: Sorry, but we would say that we cannot see any way that the clamp is movable to do what you wish.

Q: 3. does this prompter come with a case?

A: Unfortunately, the prompter does not come with a case. However, when you open it, keep the foam protecting the unit in its box. Using the shipping dimensions, you can find an appropriately sized case that works for you. The packing material is resilient enough that you can use and reuse it to protect your prompter.

Q: 4. Will this accommodate a battery gripped camera?

A: Yes. The Arca-Swiss Universal L-Bracket features a length adjustment lock which allows the user to lengthen or shorten the bracket depending on the size of the mounted camera body.

Q: 5. does this include the new pivot control t-knob?

A: The answer provided by Ubaldo does not answer the question posted but did raise another question about standard mic stand sizing. I contacted AirTurn and confirmed that the their product fits a 5/8 - 27 thread per inch mic stand. Can someone answer the t-knob question. If the there is no old stock, prior to the t-knob being added to the product, then I will purchase one from B&H. Thank you.

Q: 6. Does it have threaded holes? I would like to add it to my gimbal for an arca qr.

A: Yes, it comes with a 3/8"-16 threaded mounting point. You will likely need a bushing adapter to downsize it to 1/4"-20 in order to mount it to your gimbal. See the following: https://bhpho.to/3aNsN5U https://bhpho.to/3jGSuZI

Q: 7. Is it possible to disable the auto lock feature?

A: The "auto lock" function of the eufy Security C220 Smart Lock (BH # EUT8506111) may be disabled. Here are the steps to enable it in the eufySecurity app: Click the Setting button in the smart lock device tab Lock Settings Auto Lock Enable the Auto-lock. Slide the Auto Lock button to the left to disable this function.

Q: 8. Does the Locking lever work normally even when this clamp is installed on a flat surface?

A: Yes, the lever on the 3 Legged Thing Universal Lever Clamp with Arca-Type QR Plate should work fine on a flat service.

Q: 9. Can the mounting plates be turned 90 degrees from what is pictured? I'd like the plat to be parallel to the L bars.

A: No, in the Arca-Swiss Universal L-Bracket (Flip-Lock), the mounting plates can't be turned 90 degrees from what is pictured. That is the plates can't be parallel to the L bars.

Q: 10. Does this come with a carrying case?

A: You can lay the components on a table and figure how built up you wish to transport it. Then measure the layout figuring 3' of padding around the most delicate parts. Come back to us with those dimensions and we can get you a hard or soft case for it.