Use these Slice Ceramic Box Cutter Blades with the 10400, 10503, 10512, 10513, and 10514 Slice handles to cut boxboard or cardboard. Each blade is made from 100% zirconium oxide and has a finger-friendly double edge, which is sharp for materials but resistant to cutting skin. The blades have a rounded tip for safety, and they are non-conductive, non-magnetic, non-sparking, and chemically inert, so they will never rust. These oil- and lubricant-free blades come in a pack of four and are reversible, which doubles their lifespan.

Zirconium Oxide Blades    Double-Edged, with a Rounded Tip    Finger-Friendly Safety Edge    Non-Sparking and Chemically Inert    Non-Conductive and Non-Magnetic    Oil- and Lubricant-Free Blade    Reversible Blade Doubles Lifespan

10400, 10503, 10512, 10513, and 10514 handles

Related Questions and Answers

Q: 1. Will this vignette with an 18mm lens? Specifically the Tamron 18-300 (67mm). Any issues with the hood fitting properly?

A: This filter will not vignette unless it's wider than 16mm on a full frame camera. You shouldn't have any issues fitting the lens hood over the filter either.

Q: 2. Can I use this with a Lanparte battery fro D800, and connect it to a monitor with 8 volt power out?

A: Yes it is designed to go on our dummy batteries.As for the monitor, if it takes that certain type of battery, you are good!

Q: 3. Hello, does it fit to the Nikon AF-S 24-70 f/2.8E ED VR?

A: Yes, the Sigma 82mm WR Ceramic Protector Filter can fit the Nikon AF-S NIKKOR 24-70mm f/2.8E ED VR Lens.

Q: 4. Can the camera be mounted at 90 degrees?

A: I see no reason why it would not work. You will need to design mount for the PTZOptics Large Universal Rounded Nose Wall Mount to attach to so that the camera is positioned at 90 deg. The mount is designed to support wall mounting where the top of the camera is facing vertically up or down. If you want the camera top in a horizontal position you would need to design a wood block extension to attach the mount to.

Q: 5. Will this handle also accept traditional metal blades?

A: This product only accept blades by Slice.

Q: 6. IS THE PAPER A MATT FINISH OR GLOSE ?

A: It's a 'High Gloss Metallic' paper which is '100% cotton rag' & uses the Photo Black Ink on pigment printers. This is one of the beauties of Hahnemuhle Fine Art paper, cotton & can also be glossy.

Q: 7. I'm having difficulty opening the case for the first time in which the Sigma 95 mm WR Filter is packed. I've tried twisting it and cannot find any plastic sealant. I would appreciate direction. Suggestions?

A: For the case of the Sigma 95mm WR Ceramic Protector Filter one can turn the top part of the case counter clockwise and then simply pull it off.

Q: 8. How thick is the glass on these filters? (Not concerned about the total height of the assembly)

A: Same as other filters.

Q: 9. Can I use this cable with a Canon XA 55 Series camera?

A: No, the LanParte Red-Tip Camera DC Power Spring Cable for Battery Pinch does not support powering Canon XA series cameras. Another option that would work is a dummy battery connected to a V-Mount or Gold mount battery. Also many adapters offer DTAP ports that Anton Bauer cable could attach to. Anton/Bauer P-Tap to BP-U30/60 Dummy Battery (14.4V) BH #ANPTBPDB7.2

Q: 10. Is the filter frame aluminum or brass?

A: The ring on this filter is aluminum.