Klipsch Reference Series Rf-7 Iii 2-way Floorstanding Speaker (black Ash, Single)
- Product Code: ga60616
-
Conjure the power, detail, and emotion of the live music experience in your home theater with the black-ash Reference Series RF-7 III 2-Way Floorstanding Speaker from Klipsch. Featuring a 1.75" titanium diaphragm compression driver paired with an 8.5" 90 x 90° Tractrix horn and two 10" Cerametallic cone woofers, this floorstanding speaker delivers a frequency response of 32 Hz to 25 kHz. It can handle up to 250W of continuous power from your amplifier of choice.
2-Way Speaker Design Up to 250W RMS Power Handling 1.75" Titanium Compression Driver 8.5" Square 90 x 90° Tractrix Horn Two 10" Cerametallic Cone Woofers 32 Hz to 25 kHz Frequency Response 100 dB Sensitivity Supports Bi-Wiring and Bi-Amping Cast Frame Woofer Design Furniture-Grade Wood Veneer
Key Specs | |
---|---|
Speaker Configuration | 2-Way |
Power Handling | 250 W RMS 1000 W Peak |
Drivers | 2x 10" / 254 mm Cerametallic Cone Woofer 1.75" / 44.45 mm Titanium Tweeter |
Frequency Response | 32 Hz to 25 kHz (±3 dB) |
Inputs/Outputs | 2x Binding Post Pair |
Speaker System | |
Speaker Configuration | 2-Way |
Power Handling | 250 W RMS 1000 W Peak |
Bi-Amp Capability | Yes |
Drivers | 2x 10" / 254 mm Cerametallic Cone Woofer 1.75" / 44.45 mm Titanium Tweeter |
Enclosure Type | Bass-Reflex |
Ports | 2x Rear-Firing |
Frequency Response | 32 Hz to 25 kHz (±3 dB) |
Impedance | 8 Ohms |
Inputs/Outputs | 2x Binding Post Pair |
Crossover | 1300 Hz |
Sensitivity | 100 dB |
Physical | |
Environmental Resistance | No |
Placement & Mounting Options | Floorstanding (with Included Hardware) |
Grille | Cloth (Removable) |
Dimensions | 13.9 x 49 x 17.9" / 35.3 x 124.5 x 45.5 cm (with Base) |
Weight | 97.0 lb / 44.0 kg |
Packaging Info | |
Package Weight | 110 lb |
Box Dimensions (LxWxH) | 55 x 23.5 x 18.5" |
The compression driver's phase plug design improves phase coherency at the throat of the horn, resulting in improved sound pressure linearity at high frequencies.
The Tractrix horn uses a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension while enhancing imaging and dynamics. The compressed molded rubber construction adds high-frequency damping to reduce harshness, improve detail, and deliver clean, natural sound.
Cerametallic woofers are designed to combine high rigidity with a lightweight construction to ensure minimal cone breakup and distortion. They pair seamlessly with the Tractrix horn-loaded compression driver to deliver enhanced speaker efficiency.
Using Tractrix geometry, the RF-7 III' ports ensure efficient air transfer from the cabinet for clean and powerful low-frequency response.
The bifurcated enclosure allows each 10" driver and port to work independently from each other. This improves the linearity of both drive systems, and minimizes standing wave problems inside the cabinet to prevent frequency anomalies in the sensitive mid-range frequencies
Each 10" woofer is equipped with a heavy-duty cast aluminum frame for resonant-free operation. In addition, each woofer incorporates a dual shorting-ring magnet structure to eliminate modulation of the magnetic flux. This design results in improved linearity of cone movement.
The RC-7 III speaker's enclosure boasts a furniture-grade black-ash wood veneer.
Related Questions and Answers
Q: 1. Are these Sony speakers magnetically shielded?
A: Yes they are.
Q: 2. Can you please tell is there a pair of speakers in the box (in other words two speakers) or only one speaker?
A: There is only one speaker in the box.
Q: 3. What a good receiver for this speaker? please please. Thank you so much.
A: I use these speakers with Onkyo TX-NR626. This receiver maybe not the best in class, but it delivers absolutely great sound and has all features I need form a home theater system. However, you absolutely need a central speaker and a subwoofer.
Q: 4. What is the country of manufacturing of this product?
A: China
Q: 5. Is this speaker powered or does it require an amplifier?
A: An amplifier or receiver is required o power this speaker.
Q: 6. is the speaker is good for hi fi sound hi fi system.is it best for hi fi music system or home theater system?
A: I'm using it for my home theater with Yamaha 3040 receiver. The sound is great.I haven't test it for HiFi sound. So, can't really tell.
Q: 7. Hello, may I ask. Do I have a 6 ohm 120 watt amplifier that can drive 6 ohm 140 watt speakers
A: Typically speakers will have a range of power that will run them, and in this case the top end is 140 watts. So yes, a receiver that produces 120 watts per channel will be fine.
Q: 8. Can i use this in India?
A: Yes, the SS-CS3 is powered by your receiver and/or your amp.
Q: 9. I have a question regarding this speaker. I bought a pair with CS3 Bookshelf and subwoofer from Sony. I need to choose an AVR and I am quite confused. The CS3 has a 145 Watts maximum input power. On the Web, I have found that choosing an underpowered AVR could damage the speaker due to clipping. I have also found that there should be no problem with a more powerful AVR. Finding an amplifier or AVR supporting 6 ohms speakers with 145 Watts maximum is not obvious for a 7.2.6 home cinema room. What should I choose: an underpowered amplifier/AVR or a more powerful one? For example, is choosing an AVR of 170W for 6 ohms with 2 channel driven would be okay (the power decreases when all channels are used)? Thanks in advance.
A: You will not need n amplifier or receiver that is rated to the maximum peak input power of this speaker. You will not have to worry about clipping if the receiver is rated from say 65 to 125 watts RMS per channel at 6 ohms. SOONY does not provide the more accurate RMS or Continuous rating, but it is closer to 75w per channel at 6 ohms.
Q: 10. im from India.. It's International Warranty?
A: The included warranty is USA only.
Top Bestselling Products
Klipsch Reference Series Rf-7 Iii 2-way Floorstanding Speaker (walnut, Single)
$6,597.00 $9,301.77
Bowers & Wilkins 703 S3 3-way Floorstanding Speaker (mocha, Single)
$8,998.50 $13,497.75
Rf-links Lx-1700/10 10w Audio / Video Transmitter
$14,994.00 $23,240.70
Listen Technologies Idsp Prime Level Iii Stationary Rf System (72 Mhz)
$7,407.00 $9,480.96
Klipsch Reference R-40m Bookshelf Speakers (pair)
$747.00 $1,045.80
Audioengine P4 2-way Passive Bookshelf Speakers (white, Pair)
$747.00 $941.22
Klipsch R-50pm 2-way Active Wireless Bookshelf Speakers (black, Pair)
$1,587.00 $2,015.49
Klipsch The Nines 2-way Active Wireless Bookshelf Speakers (walnut, Pair)
$4,497.00 $6,745.50
Klipsch The Sevens 2-way Active Wireless Bookshelf Speakers (walnut, Pair)
$3,897.00 $4,988.16
Klipsch The Sevens 2-way Active Wireless Bookshelf Speakers (black, Pair)
$3,897.00 $5,066.10
Lenscoat Lenspouch (extra-large, Realtree Ap Snow)
$117.75 $157.78
Products You May Like
Mount-it! Hand Crank Standing Desk With 55" Tabletop (maple)
$1,289.97 $1,689.86
Bosch Ple-10m2-eu 2-channel Plena Mixer
$2,146.41 $2,661.55
Skb Iseries 2015-10pt Think Tank Designed Divider Set
$419.97 $592.16
K-tek Kc108 Essential Composite Boompole (uncabled, 9')
$617.70 $747.42
Astera 100° Diffuser Sheet For Fp6 Hydrapanel
$29.70 $38.02
Haida Nanopro Mc Nd Filter (82mm, 4-stop)
$273.00 $406.77
Tiffen 6.6 X 6.6" Uv 17 Filter
$1,455.00 $2,109.75
Arista Developing Trays (16 X 20", 4-pack)
$269.97 $340.16
Apple 14" Macbook Pro (m3 Pro, Silver)
$11,397.00 $14,816.10
Tiffen 4 X 6" 4 Yellow Soft-edge Graduated Filter (vertical Orientation)
$1,424.85 $2,094.53
The Screen Works 48" Skirt For Stager's Choice Projection Screen-8'6"x14'-black
$2,231.85 $2,901.41
Decksaver 4ms Company Pod48x Cover
$194.97 $241.76
Carl B-01 Straight Replacement Craft Blade
$23.16 $30.34
Rosco Steel Gobo #7811 - Soft Breakup - Size B
$54.00 $73.44