Designed as a multipurpose, utilitarian mid to long-range optic, the Hawke Optics 3-9x40 Vantage IR Riflescope boasts a partially-illuminated crosshair reticle with five selectable brightness levels for use in most lighting conditions in either red or green. Red is ideal for low-light conditions, while green is easier to see in bright sunlight. The 40mm objective draws in generous amounts of light versus smaller objectives while maintaining a low profile. Covered turrets help guard against accidental adjustments while a fast-focus collar and knurled rheostat allow you to quickly adapt to rapidly changing situations. Complementing the performance of the scope is a lightweight and durable anodized aluminum housing, with a 1" one-piece maintube that is nitrogen-filled and O-ring sealed to be fog and waterproof.

Rimfire .22 HV Reticle, 2nd Focal Plane    5 Brightness Levels in Red or Green    1" One-Piece Maintube    1/4 MOA Impact Point Correction    100 MOA Windage/Elevation Adjustment    Low-Profile Capped Turrets    Anodized Aluminum Alloy Housing    11-Layer Fully Multi-Coated Optics    Nitrogen-Filled, Water and Fogproof    Medium Match Ring Mounts with Crossbar

• 3-9x zoom range
• 40mm objective lens
• 11-layer antireflection fully multicoated optics
• 39-12.7' field of view at 100 yards

• Illuminated crosshair-style reticle
  • Designed for high-velosity .22 LR caliber rounds
  • Non-illuminated crosshairs and hollow outer posts
  • Illuminated center and adjusted aiming crosses
  • Designed to be zeroed on 9x at 50 yd with all aim-points on lower vertical axis precalculated out to 200 yards
  • Sub-tensions set at 9x magnification
  • Round specifications:
    • Muzzle velocity: 1260 ft/s
    • Ballistic Coeffiecient: 0.1262
    • Scope height: 1.75" (44.5mm)
• Placed on second focal plane
• Partially illuminated:
  • Knurled Posi-Grip adjustment collar
  • Five selectable brightness levels
  • Choose between red and green colors
  • Red is ideal for low-light conditions
  • Green is easier to see in bright daylight than red
• Runs on one included CR2032 coin-cell battery

• Fast-focus collar
• 1/4 MOA per click impact point correction
• 100 MOA windage and elevation adjustment range
• Parallax-free to 75 yards
• Low-profile covered turret caps prevent accidental adjustment
• 3.5" long eye relief
• 13-4mm exit pupil

• 1" one-piece maintube
• Lightweight and durable aluminum alloy housing
• Nitrogen-filled for fog and waterproof performance
• Rated for use on most calibers and recoil resistant
• Length: 12.7 inches
• Weight: 17.9 ounces

Related Questions and Answers

Q: 1. Will this work with the 55w Boltzen light?

A: Yes it will

Q: 2. Does this thing really work? How many Stops should I anticipate opening up? Do I compose without the filter then screw it on the lens?

A: You would need to pre-focus and compose your shot prior to screwing on the Kase 77mm IR 720 Infrared Threaded Filter. The results may vary when using this filter.

Q: 3. can I use this with a standard 35 mm camera, like the Pentax Kx?I'd like to use it for skiing under a jacket.

A: Yes. This chest harness will be able to accommodate most standard size 35mm DSLR's, including the Pentax Kx. This harness will be the most secure way to attach your camera to your body while moving around.

Q: 4. Will this work for the medium pancake lantern?

A: Yes, the Chimera Orbiter Ring for Medium Lightbank is compatible with the Chimera Medium Pancake Lantern.

Q: 5. Are these for 1 tube scope? Will these fit a Marlin Model 60 dovetailed receiver? Is this a set of 2?

A: Yes they Fit a 1 In tube,they fit the Dovetail groove on top of my Remington Receiver on my 22 Pump,Not sure of Design of receiver on your Marlin 60 and Yes they are a set of 2, hope that helps,I like the Fact I can use my Iron Sights without removing the Scope.

Q: 6. are these large enough to cut 120mm film negatives in one cut?

A: Yes. The Dahle 40008 Vantage Scissors (8") can cut 120 film in a single cut.

Q: 7. Can this work as an attachment to the older Neewer C300 strobes to mount bowen based modifiers?

A: This was designed to modify Botzen 55 Fresnel lights to accept Bowens style modifiers. It will work with other Bowens S mount modifiers that use this mount.

Q: 8. In the description, it states that this is compatible with the Komoto K5S head. My question is this, is the K5S plate the same as the Komoto K5 plate and is it compatible with the Komoto K5. What is the difference between the Komoto K5S and the K5 heads?

A: I'm not finding mention of a K5S plate in the description for the iFootage HV-01 Conversion Plate, maybe it was an error that was removed? Either way the iFootage HV-01 Conversion Plate is compatible with the plate form the iFootage Komodo K5 Fluid Head.

Q: 9. WILL THIS PRODUCT WORK THROUGH GLASS FROM 30 FEET AWAY?

A: The specifications says 40' so you are getting near the edge of this device's capabilities. Putting the glass up may or may not scatter the IR sufficiently. This situation is thus unknown and can only be answered by customer testing.

Q: 10. Is this adapter going to work with Hasselblad FE 2/110 mm Planar for 205/203 FE?

A: Yes the Cambo HV-GFX Lens Adapter is compatible with the Hasselblad FE Planar 2 110mm lens.