The HEDEN YMER Lens Control Kit without Motor provides wireless focus and iris control and supports zoom control via an optional wired LANC controller unit. Included are a transmitter and receiver that provide up to 330' of wireless transmission indoors and up to 1640' line-of-sight transmission in open areas. The receiver is capable of driving up to two motors (focus/iris), one at a time, switching between them at the press of a button. It supports the HEDEN M21VE-L, M26VE, VM35, LM30, and CM55 motors. The system is designed to provide fast, accurate responsiveness.

A key feature of this system is HEDEN's LenSaver Calibration, which provides a simple and effective way of calibrating for follow focus control. Press the "calibration" button, move your lens by hand from end-stop to end-stop, and then press the "calibration" button again as the last step. This is done without risk of damaging delicate lenses or lenses without end-stops. Another key feature is Manual Override, which lets you take manual control of the lens without affecting calibration. This feature allows the DP or camera operator to take manual control of the lens from the focus puller.

The YMER 1 transmitter's comfortable control knob offers very smooth rotation and features adjustable resistance for varying needs. Limit points can be set for easier focus adjustments, and the rotation range can be increased for finer control. Mounting threads on the rear allow attaching other devices, and an onboard button also allows you to remotely trigger recording. The transmitter is powered by a Sony NP-FM500H compatible battery, sold separately.

The YMER 1+1 receiver offers one wireless channel for focus and iris control, and one wired channel for an optional HEDEN LANC controller for zoom control.

YMER-1 Transmitter and YMER 1+1 Receiver    M21VE-L 1 Nm 15/19mm Rod-Mount Motor    Ultra-Compact Gimbal/Drone Motor Design    Interchangeable Snap-On 0.8 Gear Module    Up to 1640' Wireless Transmission    Wireless Focus/Iris Control, Switchable    Zoom Control via Optional LANC Unit    Proprietary 3-Step Focus Calibration    Manual Focus Override    Adjustable Resistance and Rotation Range

• YMER-1 transmitter and YMER 1+1 receiver
• Up to 1640' wireless line-of-sight transmission
• Receiver drives up to two motors, switchable at the press of a button for focus and iris control, and supports an optional wired LANC controller unit for zoom control
• Supports the HEDEN M21VE-L, M26VE, VM35, LM30, and CM55 motors
• Simple 3-step LenSaver Calibration
• Manual override without affecting calibration
• Adjustable control knob resistance
• Limit points
• Adjustable rotation range for finer control
• Mounting threads on the rear of the transmitter for attaching accessories/other devices
• Transmitter is powered by a Sony NP-FM500H compatible battery, sold separately
• Record trigger

Related Questions and Answers

Q: 1. Hello, what is the allowable voltage range for the motor? and can it be powered from the Ronin Rs2 and Zhiyun Crane 4?

A: The Tilta Nucleus Nano II motor requires 3 to 17 VDC which is supported on the DJI RS2. The Zhiyun Crane 4 output is 5v and does not look like it would be able to power the Nano II motor.

Q: 2. can you run/stop with this motor through usb-c?

A: The Tilta Nucleus Nano II FIZ Lens Control Motor Kit does not have any camera controls.

Q: 3. Does this motor works with Tilta handle BH #TIALFH457B focus wheel, a/b marks and calibration functions?

A: Yes, the Tilta Left Side Advanced Focus Handle (F570 Battery) will be able to power and control the Nano II motor, but only when using the Advanced Side Focus Handle USB-C Control Cable for Nucleus Nano II Motor (30cm). Any other standard USB-C to USB-C power cable will not be able to communicate between the two. Tilta USB-C Control Cable for Nano Nucleus II Motor (11.8") BH #TICBFHUSBC30

Q: 4. Wich usbc cables are compatible with this motor to run it from the RS3 PRO? i need spare cables.

A: USB-C cables that can are made for data and charging will be compatible for controlling or charging passthrough with the Tilta Nucleus Nano II FIZ Lens Control Motor Kit.

Q: 5. What is the difference between this and a standard Heden M26 - can I use them interchangeably?

A: Our opinion is that probably you can. However so that we may confirm, please send us the exact Heden model you are using. provideo@bhphoto.com

Q: 6. I need spare usbc cables to operate this motor with the RS3 pro. WIch cables are compatible?

A: USB-C cables made for charging are the required USB-C type for using the Tilta Nucleus Nano II FIZ Lens Control Motor Kit.

Q: 7. What else is in the package?

A: The system contains the following: · 1 x YMER-1 transmitter · 1 x YMER 1+1 receiver · 2 x Hedén digital servo motor M26VE-LX · 2 x Gear 0.8 module · 2 x Bracket with 19mm to 15mm reduction insert · 1 x White scale ring · 1 x Power cable · 2 x Motor cable · 1 x Hedén neck strap Sony NP-FM500H compatible battery and charger not included in package

Q: 8. What type of zoom demand controller with work with this motor?

A: I would recommend the Preston Micro Force V+F3.

Q: 9. What type of zoom demand controller will work with this motor?

A: I would recommend the Preston Micro Force V+F3.

Q: 10. Can you connect to this motor with the Original Tilta Nucleus-M Fiz Hand unit?

A: Yes, the Tilta Nucleus Nano II FIZ Lens Control Motor Kit can be connected to/controlled by the origional Tilta Nucleus-M FIZ Hand Controller.