The Prism Sound ADA-8XR Frame is a rack-mountable 2 RU audio interface chassis designed to deliver versatile clocking and configurability for producers, musicians, and audio engineers in home, project, and commercial studios. Its modular design yields flexible I/O arrangements thanks to four I/O module slots—two analog and two digital. A variety of modules (available separately) can be installed for access to multichannel analog/digital inputs and outputs as well as Pro Tools or FireWire workstation connectivity.

The ADA-8XR Frame supports resolutions up to 24-bit/192 kHz, and can clock internally or to external AES3, AES11, word clock, or Pro Tools Loop Sync. The built-in Utility Module provides stereo analog RCA and digital BNC audio outputs, BNC word clock and XLR AES11 sync I/O, and a DB9 serial communications port. Additionally, the front panel has a 1/4" stereo headphone output along with assignable 8-channel bargraph meters. An onboard display and comprehensive controls enable efficient adjustment of parameters, which can be quickly stored and recalled via factory and user presets. The ADA-8XR Frame comes with no I/O modules, ready for custom configurations.

Modular Design for Flexible I/O Setups    Up to 24-Bit / 192 kHz Resolution    16 x Balanced Analog Inputs via XLR    8-Channel AES3 I/O via DB25    1/4" Stereo Headphone Output    Versatile Clocking & Routing Options    Low Distortion & Noise    Selectable Input Limiters    Onboard Display & Comprehensive Controls

Modular architecture accommodates special configurations and provides future-proofing with individually upgradeable A/D conversion, D/A conversion, DSP, digital interfacing, and utility hardware

Supports sample rates up to 192 kHz

2-channel monitor section follows channel pairs or a mix of all channels

8-channel assignable bargraph meter array with over-detection

Renowned Prism Sound jitter-rejecting PLL technology and low-jitter master clock

Flexible synchronization options including sync to AES11, word clock, or video sync

Flexible routing allows creation of digital-to-digital processing paths for processing or format conversion

SNS noise-shapers preserves dynamic quality during 16-/20-bit transfers

MR-X bit-splitting allows extended bit depths and sample rates on 16-bit media

DRE (Dynamic Range Enhancement) enables 24-bit performance on 16-bit stereo media without sacrificing tracks

Optional DSP expansion facility for extended processing features including synchronous

sample-rate conversion

Comprehensive store system for fast-access factory and user presets

Unique "Access button" layout combines the flexibility of menus with the speed of dedicated

controls

Internet-upgradeable software loads from your computer into flash memory inside the ADA-8XR

Rack-mountable enclosure occupies 2 RU of rack space

Related Questions and Answers

Q: 1. What are the power requirements...where I live it’s 230v-60Hz....?

A: The Bose T4S is powered through the included ToneMatch cable which connects to a Bose L1 or F1 system for digital audio and power. It does not use an external power supply.

Q: 2. Can I use the T4s as audio interface with an iPad Pro ?

A: No, the Bose T4S ToneMatch 4-Channel Audio Mixer and USB Interface is not compatible for use with an iOS device like the iPad Pro, but it is compatible for use with Mac and Windows computers.

Q: 3. Can this be used with an iOS device via USB, as long as you have the camera connection kit?

A: Theoretically, you should be able to adapt the USB to a lightning connection and use this mixer with an iOS devise, but there is no documentation confirming this from ART. This product is meant to be used with a computer.

Q: 4. Does the XL-AES allow the 833 to record more than 8 channels?

A: Yes, Now that the +4 plug-in has been released. If purchased, the XL-AES does add 8 balanced physical inputs to the original 6. +4 plug-in Brings the total isolated channels to 12, you now have the physical inputs to back it up.

Q: 5. Does the USB interface have any sort of latency for input/output?

A: There are a lot of variables to consider when measuring overall latency in a DAW setup. All USB interfaces contribute to this latency as well. Unfortunately, the manufacturer does not list a specification to know exactly how much. The processing power of computer is a big determining factor, along with the software being used to record as well. Depending on the software, users may adjust the buffer settings to help with the latency. You may expect around 10-20ms overall latency before making any adjustments to the buffer.

Q: 6. Does this have phantom power? Also I see it records? Is it a multitrack recorder or just stereo?

A: This unit does not have built-in recoed capabilities- it intrfaces audio to a computer, which you could then record to.

Q: 7. Is it possible to use this product as an external sound card? Specifically, I'd like to use it to connect it to my computer through USB and use it to get sound from my computer to my studio monitors. Is this possible?

A: The ART USB Mix can be used to playback audio from your computer via USB through the mixer. With a single button the USB audio is routed through channel 2/3 and output via the main analog outs.

Q: 8. Can this be used with programs such as DaVinci resolve (fairlight), Adobe audition, premiere, avid, etc?

A: Yes, the ART USBMix6 Mixer has a built-in USB audio interface that is class-compliant with Mac and Windows operating systems, and it can be used with the included audio software or with your own audio software such as Adobe Audition or Premiere, Avid Pro Tools, or Blackmagic Design DaVinci Resolve.

Q: 9. Can you use a regular cat5 cable for the audio engine cable? Also, What is the longest length recommended.

A: Hi, Harold. Thank you for your question. You can use a CAT-5 or CAT-6 cable in place of the ToneMatch cable. This is suitable for connecting a T4S to an L1 Model II or L1 Model 1S. Fifty feet is the recommended maximum. If you have more questions like this, please visit our Bose Portable PA Community. https://www.bosepro.community/g/portable Thank you.

Q: 10. Could the Bose T4S ToneMatch Mixer control two different Bose L1 model 2 at the same time?

A: The Bose T4s does have connection available for two L1 speakers, so you can use them for left and right. Here is the extra cable you can use, for a second speaker: https://www.bhphotovideo.com/c/product/744793-REG/Bose_42536_T1_ToneMatch_Audio_Engine.html